| # Kconfig - general configuration options |
| |
| # |
| # Copyright (c) 2014-2015 Wind River Systems, Inc. |
| # Copyright (c) 2016 Intel Corporation |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| # |
| |
| # Include these first so that any properties (e.g. defaults) below can be |
| # overriden in *.defconfig files (by defining symbols in multiple locations). |
| # After merging all the symbol definitions, Kconfig picks the first property |
| # (e.g. the first default) with a satisfied condition. |
| # |
| # Board defaults should be parsed before SoC defaults, because boards usually |
| # overrides SoC values. |
| # |
| # Note: $ARCH and $BOARD_DIR might be glob patterns. |
| source "$(BOARD_DIR)/Kconfig.defconfig" |
| |
| source "$(SOC_DIR)/$(ARCH)/*/Kconfig.defconfig" |
| |
| source "boards/Kconfig" |
| |
| source "$(SOC_DIR)/Kconfig" |
| |
| source "arch/Kconfig" |
| |
| source "kernel/Kconfig" |
| |
| source "dts/Kconfig" |
| |
| source "drivers/Kconfig" |
| |
| source "lib/Kconfig" |
| |
| source "subsys/Kconfig" |
| |
| source "ext/Kconfig" |
| |
| source "$(PROJECT_BINARY_DIR)/Kconfig.modules" |
| |
| menu "Build and Link Features" |
| |
| menu "Linker Options" |
| |
| choice |
| prompt "Linker Orphan Section Handling" |
| default LINKER_ORPHAN_SECTION_WARN |
| |
| config LINKER_ORPHAN_SECTION_PLACE |
| bool "Place" |
| help |
| Linker puts orphan sections in place without warnings |
| or errors. |
| |
| config LINKER_ORPHAN_SECTION_WARN |
| bool "Warn" |
| help |
| Linker places the orphan sections in ouput and issues |
| warning about those sections. |
| |
| config LINKER_ORPHAN_SECTION_ERROR |
| bool "Error" |
| help |
| Linker exits with error when an orphan section is found. |
| |
| endchoice |
| |
| config CODE_DATA_RELOCATION |
| bool "Relocate code/data sections" |
| depends on ARM |
| help |
| When selected this will relocate .text, data and .bss sections from |
| the specified files and places it in the required memory region. The |
| files should be specified in the CMakeList.txt file with |
| a cmake API zephyr_code_relocation(). |
| |
| config HAS_FLASH_LOAD_OFFSET |
| bool |
| help |
| This option is selected by targets having a FLASH_LOAD_OFFSET |
| and FLASH_LOAD_SIZE. |
| |
| config FLASH_LOAD_OFFSET |
| hex "Kernel load offset" |
| default $(dt_hex_val,DT_CODE_PARTITION_OFFSET) if BOOTLOADER_MCUBOOT |
| default 0 |
| depends on HAS_FLASH_LOAD_OFFSET |
| help |
| This option specifies the byte offset from the beginning of flash that |
| the kernel should be loaded into. Changing this value from zero will |
| affect the Zephyr image's link, and will decrease the total amount of |
| flash available for use by application code. |
| |
| If unsure, leave at the default value 0. |
| |
| config FLASH_LOAD_SIZE |
| hex "Kernel load size" |
| default $(dt_hex_val,DT_CODE_PARTITION_SIZE) if BOOTLOADER_MCUBOOT |
| default 0 |
| depends on HAS_FLASH_LOAD_OFFSET |
| help |
| If non-zero, this option specifies the size, in bytes, of the flash |
| area that the Zephyr image will be allowed to occupy. If zero, the |
| image will be able to occupy from the FLASH_LOAD_OFFSET to the end of |
| the device. |
| |
| If unsure, leave at the default value 0. |
| |
| config TEXT_SECTION_OFFSET |
| hex |
| prompt "TEXT section offset" if !BOOTLOADER_MCUBOOT |
| default 0x200 if BOOTLOADER_MCUBOOT |
| default 0 |
| help |
| If the application is built for chain-loading by a bootloader this |
| variable is required to be set to value that leaves sufficient |
| space between the beginning of the image and the start of the .text |
| section to store an image header or any other metadata. |
| In the particular case of the MCUboot bootloader this reserves enough |
| space to store the image header, which should also meet vector table |
| alignment requirements on most ARM targets, although some targets |
| may require smaller or larger values. |
| |
| config HAVE_CUSTOM_LINKER_SCRIPT |
| bool "Custom linker scripts provided" |
| help |
| Set this option if you have a custom linker script which needed to |
| be define in CUSTOM_LINKER_SCRIPT. |
| |
| config CUSTOM_LINKER_SCRIPT |
| string "Path to custom linker script" |
| depends on HAVE_CUSTOM_LINKER_SCRIPT |
| help |
| Path to the linker script to be used instead of the one define by the |
| board. |
| |
| The linker script must be based on a version provided by Zephyr since |
| the kernel can expect a certain layout/certain regions. |
| |
| This is useful when an application needs to add sections into the |
| linker script and avoid having to change the script provided by |
| Zephyr. |
| |
| config CUSTOM_RODATA_LD |
| bool "Include custom-rodata.ld" |
| help |
| Include a customized linker script fragment for inserting additional |
| data and linker directives into the rodata section. |
| |
| config CUSTOM_RWDATA_LD |
| bool "Include custom-rwdata.ld" |
| help |
| Include a customized linker script fragment for inserting additional |
| data and linker directives into the data section. |
| |
| config CUSTOM_SECTIONS_LD |
| bool "Include custom-sections.ld" |
| help |
| Include a customized linker script fragment for inserting additional |
| arbitrary sections. |
| |
| config LINK_WHOLE_ARCHIVE |
| bool "Allow linking with --whole-archive" |
| help |
| This options allows linking external libraries with the |
| --whole-archive option to keep all symbols. |
| |
| config KERNEL_ENTRY |
| string "Kernel entry symbol" |
| default "__start" |
| help |
| Code entry symbol, to be set at linking phase. |
| |
| config CHECK_LINK_MAP |
| bool "Check linker map" |
| default y |
| help |
| Run a linker address generation validity checker at the end of the |
| build. |
| |
| endmenu |
| |
| menu "Compiler Options" |
| |
| config NATIVE_APPLICATION |
| bool "Build as a native host application" |
| help |
| Build as a native application that can run on the host and using |
| resources and libraries provided by the host. |
| |
| choice |
| prompt "Optimization level" |
| default NO_OPTIMIZATIONS if COVERAGE |
| default DEBUG_OPTIMIZATIONS if DEBUG |
| default SIZE_OPTIMIZATIONS |
| help |
| Note that these flags shall only control the compiler |
| optimization level, and that no extra debug code shall be |
| conditionally compiled based on them. |
| |
| config SIZE_OPTIMIZATIONS |
| bool "Optimize for size" |
| help |
| Compiler optimizations will be set to -Os independently of other |
| options. |
| |
| config SPEED_OPTIMIZATIONS |
| bool "Optimize for speed" |
| help |
| Compiler optimizations will be set to -O2 independently of other |
| options. |
| |
| config DEBUG_OPTIMIZATIONS |
| bool "Optimize debugging experience" |
| help |
| Compiler optimizations will be set to -Og independently of other |
| options. |
| |
| config NO_OPTIMIZATIONS |
| bool "Optimize nothing" |
| help |
| Compiler optimizations will be set to -O0 independently of other |
| options. |
| |
| endchoice |
| |
| config COMPILER_OPT |
| string "Custom compiler options" |
| help |
| This option is a free-form string that is passed to the compiler |
| when building all parts of a project (i.e. kernel). |
| The compiler options specified by this string supplement the |
| predefined set of compiler supplied by the build system, |
| and can be used to change compiler optimization, warning and error |
| messages, and so on. |
| |
| endmenu |
| |
| menu "Build Options" |
| |
| config KERNEL_BIN_NAME |
| string "The kernel binary name" |
| default "zephyr" |
| help |
| This option sets the name of the generated kernel binary. |
| |
| config OUTPUT_STAT |
| bool "Create a statistics file" |
| default y |
| help |
| Create a stat file using readelf -e <elf> |
| |
| config OUTPUT_DISASSEMBLY |
| bool "Create a disassembly file" |
| default y |
| help |
| Create an .lst file with the assembly listing of the firmware. |
| |
| config OUTPUT_PRINT_MEMORY_USAGE |
| bool "Print memory usage to stdout" |
| default y |
| help |
| If the toolchain supports it, this option will pass |
| --print-memory-region to the linker when it is doing it's first |
| linker pass. Note that the memory regions are symbolic concepts |
| defined by the linker scripts and do not necessarily map |
| directly to the real physical address space. Take also note that |
| some platforms do two passes of the linker so the results do not |
| match exactly to the final elf file. See also rom_report, |
| ram_report and |
| https://sourceware.org/binutils/docs/ld/MEMORY.html |
| |
| config BUILD_OUTPUT_HEX |
| bool "Build a binary in HEX format" |
| help |
| Build a binary in HEX format. This will build a zephyr.hex file need |
| by some platforms. |
| |
| config BUILD_OUTPUT_BIN |
| bool "Build a binary in BIN format" |
| default y |
| help |
| Build a binary in BIN format. This will build a zephyr.bin file need |
| by some platforms. |
| |
| config BUILD_OUTPUT_EXE |
| bool "Build a binary in ELF format with .exe extension" |
| help |
| Build a binary in ELF format that can run in the host system. This |
| will build a zephyr.exe file. |
| |
| config BUILD_OUTPUT_S19 |
| bool "Build a binary in S19 format" |
| help |
| Build a binary in S19 format. This will build a zephyr.s19 file need |
| by some platforms. |
| |
| config BUILD_NO_GAP_FILL |
| bool "Don't fill gaps in generated hex/bin/s19 files." |
| depends on BUILD_OUTPUT_HEX || BUILD_OUTPUT_BIN || BUILD_OUTPUT_S19 |
| |
| config BUILD_OUTPUT_STRIPPED |
| bool "Build a stripped binary" |
| help |
| Build a stripped binary. This will build a zephyr.stripped file need |
| by some platforms. |
| |
| config APPLICATION_DEFINED_SYSCALL |
| bool "Scan application folder for any syscall definition" |
| help |
| Scan additional folders inside application source folder |
| for application defined syscalls. |
| |
| endmenu |
| endmenu |
| |
| |
| menu "Boot Options" |
| |
| config IS_BOOTLOADER |
| bool "Act as a bootloader" |
| depends on XIP |
| depends on ARM |
| help |
| This option indicates that Zephyr will act as a bootloader to execute |
| a separate Zephyr image payload. |
| |
| config BOOTLOADER_SRAM_SIZE |
| int "SRAM reserved for bootloader" |
| default 16 |
| depends on !XIP || IS_BOOTLOADER |
| depends on ARM || XTENSA |
| help |
| This option specifies the amount of SRAM (measure in kB) reserved for |
| a bootloader image, when either: |
| - the Zephyr image itself is to act as the bootloader, or |
| - Zephyr is a !XIP image, which implicitly assumes existence of a |
| bootloader that loads the Zephyr !XIP image onto SRAM. |
| |
| config BOOTLOADER_MCUBOOT |
| bool "MCUboot bootloader support" |
| help |
| This option signifies that the target uses MCUboot as a bootloader, |
| or in other words that the image is to be chain-loaded by MCUboot. |
| This sets several required build system and Device Tree options in |
| order for the image generated to be bootable using the MCUboot open |
| source bootloader. Currently this includes: |
| |
| * Setting TEXT_SECTION_OFFSET to a default value that allows space |
| for the MCUboot image header |
| * Activating SW_VECTOR_RELAY on Cortex-M0 (or Armv8-M baseline) |
| targets with no built-in vector relocation mechanisms |
| * Including dts/common/mcuboot.overlay when building the Device |
| Tree in order to place and link the image at the slot0 offset |
| |
| config BOOTLOADER_ESP_IDF |
| bool "ESP-IDF bootloader support" |
| depends on SOC_ESP32 |
| help |
| This option will trigger the compilation of the ESP-IDF bootloader |
| inside the build folder. |
| At flash time, the bootloader will be flashed with the zephyr image |
| |
| config REALMODE |
| bool "boot from x86 real mode" |
| depends on X86 |
| help |
| This option enabled Zephyr to start in x86 real mode, instead of |
| protected mode. |
| |
| config BOOTLOADER_KEXEC |
| bool "Boot using Linux kexec() system call" |
| depends on X86 |
| help |
| This option signifies that Linux boots the kernel using kexec system call |
| and utility. This method is used to boot the kernel over the network. |
| |
| config BOOTLOADER_UNKNOWN |
| bool "Generic boot loader support" |
| depends on X86 |
| help |
| This option signifies that the target has a generic bootloader |
| or that it supports multiple ways of booting and it isn't clear |
| at build time which method is to be used. When this option is enabled |
| the board may have to do extra work to ensure a proper startup. |
| |
| config BOOTLOADER_CONTEXT_RESTORE |
| bool "Boot loader has context restore support" |
| default y |
| depends on SYS_POWER_DEEP_SLEEP_STATES && BOOTLOADER_CONTEXT_RESTORE_SUPPORTED |
| help |
| This option signifies that the target has a bootloader |
| that restores CPU context upon resuming from deep sleep |
| power state. |
| |
| config REBOOT |
| bool "Reboot functionality" |
| select SYSTEM_CLOCK_DISABLE |
| help |
| Enable the sys_reboot() API. Enabling this can drag in other subsystems |
| needed to perform a "safe" reboot (e.g. SYSTEM_CLOCK_DISABLE, to stop the |
| system clock before issuing a reset). |
| |
| config MISRA_SANE |
| bool "MISRA standards compliance features" |
| help |
| Causes the source code to build in "MISRA" mode, which |
| disallows some otherwise-permitted features of the C |
| standard for safety reasons. Specifically variable length |
| arrays are not permitted (and gcc will enforce this). |
| |
| endmenu |