| :orphan: |
| |
| .. _zephyr_1.10: |
| |
| Zephyr Kernel 1.10.0 |
| ##################### |
| |
| We are pleased to announce the release of Zephyr kernel version 1.10.0. |
| |
| Major enhancements with this release include: |
| |
| * Initial alpha-quality thread-level memory protection on x86, userspace and memory |
| domains |
| * Major overhaul to the build system and a switch from Kbuild to CMake. |
| * Newtron Flash Filesystem (NFFS) Support |
| * Increased testsuite coverage and migrated majority of testcases to use ztest |
| * Integration with MCUBOOT Bootloader |
| * Additional SoC, platform and driver support for many of the already supported |
| platforms. |
| |
| The following sections provide detailed lists of changes by component. |
| |
| Kernel |
| ****** |
| |
| * Remove deprecated k_mem_pool_defrag code |
| * Initial alpha-quality thread-level memory protection on x86, userspace and memory |
| domains: |
| |
| * Same kernel & driver APIs for kernel and user mode threads |
| * System calls for privilege elevation |
| * Stack overflow protection |
| * Kernel object and device driver permission tracking |
| * Simple app vs. kernel memory separation |
| * Memory domain APIs for fine-tuning memory region permissions |
| * Stack memory protection from other threads |
| |
| * Add the following application-facing memory domain APIs: |
| |
| * k_mem_domain_init() - to initialize a memory domain |
| * k_mem_domain_destroy() - to destroy a memory domain |
| * k_mem_domain_add_partition() - to add a partition into a domain |
| * k_mem_domain_remove_partition() - to remove a partition from a domain |
| * k_mem_domain_add_thread() - to add a thread into a domain |
| * k_mem_domain_remove_thread() - to remove a thread from a domain |
| * add k_calloc() which uses kernel heap to implement traditional calloc() |
| semantics. |
| * Introduce object validation mechanism: All system calls made from userspace, |
| which involve pointers to kernel objects (including device drivers), will need |
| to have those pointers validated; userspace must never be able to crash the |
| kernel by passing it garbage. |
| |
| Architectures |
| ************* |
| |
| * nrf52: Add support for LOW_POWER state and SYSTEM_OFF |
| * Architecture specific memory domain APIs added |
| * Tickless Kernel Implementation for Xtensa |
| * Added support for the following ARM SoCs: |
| |
| * NXP i.MX RT1052 |
| * Silabs EFM32WG |
| * STM F0 |
| * TI MSP432P4xx |
| |
| Boards |
| ****** |
| * Jailhouse port: The port will enable Zephyr to run as a guest OS on x86-64 |
| systems. It comes with a test on QEMU to validate that, thus this new board |
| introduction. |
| * Power Management for nrf52 series SOC |
| * Added support for the following ARM boards: |
| |
| * 96b_neonkey |
| * efm32wg_stk3800 |
| * mimxrt1050_evk |
| * msp_exp432p401r_launchxl |
| * nucleo_f030r8 |
| * nucleo_f091rc |
| * stm32f411e_disco |
| * stm32f412g_disco |
| * stm32l476g_disco |
| * usb_kw24d512 |
| |
| Drivers and Sensors |
| ******************* |
| |
| * timer: Add Support for TICKLESS KERNEL in xtensa_sys_timer |
| * Rename `random` to `entropy` |
| * Add Atmel SAM I2S (SSC) driver |
| * Add Atmel SAM DMA (XDMAC) driver |
| * Add plantower PMS7003 Driver |
| * Add Altera shim driver for JTAG UART soft IP |
| * Add Altera shim driver for timer soft IP |
| * Introduce mcux ccm driver |
| * Introduce mcux igpio shim driver |
| |
| Networking |
| ********** |
| |
| * HTTP API changed to use net-app API. Old HTTP API is deprecated. |
| * Loopback network interface support added. This is used in testing only. |
| * LWM2M multi-fragment network packet support added. |
| * New CoAP library implementation, supporting longer network packets. |
| * Deprecated ZoAP library. |
| * mDNS (multicast DNS) support added. |
| * SNTP (Simple Network Time Protocol) client library added. |
| * Various fixes for: TCP, RPL, ARP, DNS, LWM2M, Ethernet, net-app API, Network |
| shell, and BSD socket API |
| * Network management API fixes. |
| * Networking sample application fixes. |
| * 6lo IPv6 header compression fixes. |
| * IEEE 802.15.4 generic fixes. |
| * IEEE 802.15.4 mcr20a driver fixes. |
| * IEEE 802.15.4 kw41z driver fixes. |
| * IEEE 802.15.4 nrf5 driver fixes. |
| |
| Bluetooth |
| ********* |
| |
| * Multiple qualification-related fixes for Bluetooth Mesh |
| * Support for Bluetooth Mesh Friend Node role |
| * Support for Bluetooth Mesh Foundation Client Models |
| * New Bluetooth Mesh shell module and test application |
| * Support for PA/LNA amplifiers in the BLE Controller |
| * Support for additional VS commands in the BLE Controller |
| * Multiple stability fixes for the BLE Controller |
| |
| Build and Infrastructure |
| ************************ |
| |
| * The Zephyr project has migrated to CMake, an important step in a |
| larger effort to make Zephyr easier to use for application developers |
| working on different platforms with different development environment |
| needs. This change retains Kconfig as-is, and replaces all Makefiles |
| with corresponding CMakeLists.txt. The DSL-like Make language that |
| KBuild offers is replaced by a set of CMake extensions that provide |
| either simple one-to-one translations of KBuild features or introduce |
| new concepts that replace KBuild concepts. Please re-read the Getting |
| Started guide |
| (https://docs.zephyrproject.org/getting_started/getting_started.html) |
| with updated instructions for setting up and developing on your host-OS. |
| You *will* need to port your own out-of-tree scripts and Makefiles to |
| CMake. |
| |
| Libraries / Subsystems |
| *********************** |
| |
| * The implementation for sys_rand32_get() function has been moved to a new |
| "random" subsystem. There are new implementations for this function, one based |
| in the Xoroshift128+ PRNG (using a hardware number generator to seed), and |
| another that obtains random numbers directly from a hardware number generator |
| driver. Hardware number generator drivers have been moved to a |
| "drivers/entropy" directory; these drivers only expose the interface provided |
| by include/entropy.h. |
| * TinyCrypt updated to version 0.2.8 |
| |
| HALs |
| **** |
| |
| * Add Altera HAL for support NIOS-II boards |
| * Add mcux 2.3.0 for mimxrt1051 and mimxrt1052 |
| * stm32cube: HAL/LL static library for stm32f0xx v.1.9. |
| * Add support for STM32 family USB driver |
| * Add Silabs Gecko SDK for EFM32WG SoCs |
| * Simplelink: Update cc32xx SDK to version 1.50.00.06 |
| |
| Documentation |
| ************* |
| |
| * Missing API documentation caused by doxygen subgroups and missing |
| Sphinx directives now included. |
| * Note added to all released doc pages mentioning more current content could |
| be available from the master branch version of the documentation. |
| * Documentation updated to use CMake (vs. Make) in all examples, and |
| using a new Sphinx extension to keep examples consistent. |
| * Getting Started Guide material updated to include CMake dependencies |
| and build instructions required for version 1.10. |
| * Instead of hiding all expected warnings from the document build |
| process (there are some known doxygen/sphinx issues), the build |
| now outputs all warnings, and then reports |
| if any new/unexpected warnings or errors were detected. |
| * Obsolete V1 to V2 porting material removed. |
| * Continued updates to documentation for new board support, new samples, |
| and new features. |
| * Integration of documentation with new zephyrproject.org website. |
| * Documentation moved to docs.zephyrproject.org site (with redirection |
| from zephyrproject.org/doc) |
| |
| Tests and Samples |
| ***************** |
| |
| * Benchmarking: cleanup of the benchmarking code |
| * Add userspace protection tests |
| * Move all tests to ztest and cleanup coding style and formatting |
| |
| Issue Related Items |
| ******************* |
| |
| These GitHub issues were addressed since the previous 1.9.0 tagged |
| release: |
| |
| .. comment List derived from Jira/GitHub Issue query: ... |
| |
| * :github:`779` - CI: shippable - provide some means to allow users to rebuild |
| * :github:`1166` - Keeping reusable components under samples/ leads to build issues |
| * :github:`1236` - Cleanup CONFIG_EXECUTION_BENCHMARKING |
| * :github:`1241` - tests/net/ipv6/ FAILED on qc1000:x86 |
| * :github:`1242` - tests/kernel/mutex/mutex/ FAILED @ esp32 |
| * :github:`1256` - [cmake] A board should support multiple configurations (variants) |
| * :github:`1270` - Issue : Information CC3220SF LaunchXL |
| * :github:`1280` - shell on Arduino Due prints "shell>" before the delayed boot banner |
| * :github:`1289` - C++ 11 support! |
| * :github:`1332` - sanitycheck builds too many duplicates in CI, make it smarter |
| * :github:`1392` - No module named 'elftools' |
| * :github:`1397` - no serialport output |
| * :github:`1415` - Problem with forcing new line in generated documentation. |
| * :github:`1416` - Regression added by commit cd35742a (net/ethernet/arp: Let ethernet L2 managing pkt's reference while sending) |
| * :github:`1419` - test, please ignore |
| * :github:`1425` - spi.h and spi_legacy.h documentation conflicts |
| * :github:`1428` - networking defines being used but not defined anywhere |
| * :github:`1435` - Could not connect to Eclipse Leshan Demo Server |
| * :github:`1445` - doc: groups of items in API documentation not displaying |
| * :github:`1450` - make kconfig help is difficult to understand |
| * :github:`1474` - tests/net/ipv6_fragment build failure, missing testcase.yaml |
| * :github:`1487` - net/lib/dns doesn't respect CONFIG_NET_IPV6=n |
| * :github:`1488` - Replacing Make/Kbuild with CMake |
| * :github:`1499` - doc: replace Mac OS with macOS |
| * :github:`1501` - doc: Fix link title |
| * :github:`1510` - "make debugserver" broken for qemu_xtensa |
| * :github:`1522` - "make qemu" may not regenerate .config after changes to prj.conf |
| * :github:`1524` - doc: Remove "Changes from Version 1 Kernel" document |
| * :github:`1527` - make htmldocs failed |
| * :github:`1538` - esp32: is broken for the latest esp-idf version |
| * :github:`1542` - filter-known-issues.py fails if input file is empty |
| * :github:`1543` - doc: add process documentation for importing non-Apache2.0 licensed code |
| * :github:`1544` - regression: net: K64F: DHCP seems to fail a lot after 91041f9e |
| * :github:`1558` - Master reports itself as if it was 1.9.0 release |
| * :github:`1571` - Update to latest tinycrypt: v0.2.8 |
| * :github:`1573` - tests/net/lib/http_header_fields/ fails with CONFIG_HTTP_PARSER_STRICT enabled |
| * :github:`1580` - checkpatch output in shippable log displays without line breaks |
| * :github:`1581` - two tests fail in qemu_cortex_m3 with new SDK |
| * :github:`1597` - remove deprecated k_mem_pool_defrag() |
| * :github:`1626` - Bluetooth LE dual mode topology |
| * :github:`1628` - Bluetooth LE data length extension |
| * :github:`1629` - LE privacy 1.2 |
| * :github:`1630` - E2E tests for connection |
| * :github:`1632` - Implement Environmental Sensing Profile sample app |
| * :github:`1653` - enable stack canaries on ARC so we can run test_stackprot |
| * :github:`1670` - Add Reject command handling |
| * :github:`1853` - Review all Kconfig variables used and Simplify |
| * :github:`1880` - Zephyr Build Management |
| * :github:`1883` - Audio Codec |
| * :github:`1885` - Display Interface |
| * :github:`1902` - uWeave |
| * :github:`2011` - tcf: add support for running altera_max10 binaries |
| * :github:`2035` - doc: remove workaround for sphinx issue once 1.5 is released |
| * :github:`2202` - sporadic bad RAM pointer error under qemu_nios2 |
| * :github:`2277` - Update to a more recent version of micro-ecc in Zephyr |
| * :github:`2281` - purge usage of platform_whitelist |
| * :github:`2411` - Look into supporting additional file systems under Zephyr FS API |
| * :github:`2580` - Failure in test_nano_work |
| * :github:`2723` - QEMU NIOS2 sporadic FAIL in tests/legacy/kernel/test_context |
| * :github:`2775` - Ability to make Security / Vulnerability bugs non-public |
| * :github:`2793` - entropy subsystem |
| * :github:`2818` - Add disk access based on flash on freedom board to interface with file system |
| * :github:`2853` - Customer: Zephyr Tutorial |
| * :github:`2855` - Customer: Sample code |
| * :github:`2858` - Customer: Training / Webinar / Video |
| * :github:`2942` - Support for NXP KW2xD MCU |
| * :github:`3039` - Simple Network Time Protocol support |
| * :github:`3058` - no good way to include library code outside of $(PROJECT_BASE) |
| * :github:`3064` - Symmetric multiprocessing (SMP) |
| * :github:`3070` - Add Atmel SAM family DMA (XDMAC) driver |
| * :github:`3139` - Zephyr Tutorials and Training |
| * :github:`3142` - [PTS] GAP/TC_SEC_AUT_BV_12_C fails |
| * :github:`3143` - [PTS] GAP/TC_SEC_AUT_BV_14_C fails |
| * :github:`3144` - [PTS] GAP/TC_PRIV_CONN_BV_11_C fails |
| * :github:`3146` - [PTS] SM/SLA/PROT/BV-02-C fails |
| * :github:`3147` - [PTS] SM/SLA/SIE/BV-01-C fails |
| * :github:`3158` - Add support for Panther board based on Quark SE C1000 |
| * :github:`3184` - xtensa: Zephyr SDK build and emulation support |
| * :github:`3201` - Add Device Tree Documentation |
| * :github:`3268` - Add tickless kernel support in xtensa_sys_timer timer |
| * :github:`3274` - Lauterbach Debug Tools Support |
| * :github:`3275` - Tickless Kernel and Frequency Scaling |
| * :github:`3290` - introduce shared metadata for boards, samples and tests |
| * :github:`3294` - Application Development |
| * :github:`3297` - ROM-able |
| * :github:`3313` - [RESEARCH] Memory Protection Unit support |
| * :github:`3353` - Missing board documentation for arm/quark_se_c1000_ble |
| * :github:`3355` - Missing board documentation for arm/nucleo_f103rb |
| * :github:`3357` - Missing board documentation for arm/stm32_mini_a15 |
| * :github:`3360` - Missing board documentation for x86/panther |
| * :github:`3364` - Missing board documentation for arc/panther_ss |
| * :github:`3368` - Can Zephyr support SNMP (Simple Network Management Protocol)? |
| * :github:`3378` - Zephyr will not build with icecream |
| * :github:`3383` - Work up linker-based system call prototype for MPU enabling |
| * :github:`3412` - Provide a sample application for kernel_event_logger |
| * :github:`3415` - Building FS for Arduino 101 |
| * :github:`3432` - Port Zephyr to Silabs EFM32WG-STK3800 |
| * :github:`3484` - Provide stm32cube LL based UART driver |
| * :github:`3485` - Provide stm32cube LL based I2C driver |
| * :github:`3486` - Provide stm32cube LL based SPI driver |
| * :github:`3587` - Move board related device tree files where the board is defined |
| * :github:`3588` - Move all X86 boards and related SoCs to device tree |
| * :github:`3600` - Build warnings [-Wpointer-sign] with LLVM/icx (tests/unit/bluetooth/at) |
| * :github:`3601` - Use QMSI mailbox driver for Quark SE |
| * :github:`3604` - the http_client sample app cannot send GET request on Qemu x86 |
| * :github:`3608` - Add functionality of Gesture Sensor |
| * :github:`3621` - Design system call interface for drivers |
| * :github:`3625` - Validation mechanism for user-supplied kernel object pointers |
| * :github:`3627` - x86: implement system calls |
| * :github:`3628` - implement APIs for dropping threads to unprivileged mode |
| * :github:`3630` - use API to validate user-supplied kernel buffers |
| * :github:`3632` - define set of architecture-specific memory protection APIs |
| * :github:`3635` - Device Driver Access Control |
| * :github:`3641` - define kernel system calls |
| * :github:`3643` - [PTS] PTS server stops working while executing TC_SEC_CSIGN_BV_01_C test case |
| * :github:`3646` - Zoap message to use more than one fragment |
| * :github:`3682` - incremental builds do not work properly in Windows |
| * :github:`3683` - unable to follow directions to install Crosstool-NG on OS X |
| * :github:`3688` - OS X Setup Instructions Not Working on macOS Sierra |
| * :github:`3690` - Move to CMake or similar instead of Kbuild |
| * :github:`3697` - Use CMSIS __NVIC_PRIO_BITS consistently |
| * :github:`3716` - define / implement application-facing memory domain APIs |
| * :github:`3728` - ESP32 i2c Driver Support |
| * :github:`3772` - test_mem_pool_api crashes qemu_x86 if CONFIG_DEBUG=y |
| * :github:`3781` - iwdg: provide independent watchdog driver compliant with STM32Cube LL API |
| * :github:`3783` - Add mbedtls Crypto API shim driver |
| * :github:`3829` - PTS test case GATT/SR/GPA/BV-02-C crashes tester in QEMU |
| * :github:`3832` - ARM: implement API to validate user buffer |
| * :github:`3844` - Fix LWM2M header calculation in lwm2m_engine.c |
| * :github:`3851` - Port SPI HCI driver on new SPI API |
| * :github:`3852` - x86: implement memory domain interface |
| * :github:`3892` - Add support for STM32F429I_DISC1 board |
| * :github:`3897` - Static code scan (coverity) issues seen |
| * :github:`3922` - [PTS] GATT/SR/GAT/BV-01-C INCONC |
| * :github:`3923` - boards: provide support for Nucleo-64 F030R8 |
| * :github:`3939` - Add Atmel SAM family I2S (Inter-IC Sound) driver based on SSC module |
| * :github:`3941` - x86: implement option for PAE-formatted page tables with NX bit |
| * :github:`3942` - x86: scope SMEP support in Zephyr |
| * :github:`3984` - Build warning: [-Wpointer-bool-conversion] with LLVM/icx (samples/bluetooth/mesh_demo) |
| * :github:`3985` - Build warning: [-Wpointer-bool-conversion] with LLVM/icx (samples/bluetooth/mesh) |
| * :github:`4001` - GENERATED_KERNEL_OBJECT_FILES end up in application memory |
| * :github:`4004` - integrate printk() with console subsystem |
| * :github:`4009` - I2C API is mixing two incompatible definitions of bit-fields |
| * :github:`4014` - memory protection: implicit kernel object permissions |
| * :github:`4016` - bluetooth linker not connected |
| * :github:`4022` - net: "queue: Use k_poll if enabled" commit regressed BSD Sockets performance |
| * :github:`4026` - CC3220 WiFi Host Driver support |
| * :github:`4027` - extra unref happening on net_context |
| * :github:`4029` - TinyTILE bluetooth app flash |
| * :github:`4030` - Coverity issue seen with CID: 175366 , in file: /subsys/bluetooth/host/smp.c |
| * :github:`4031` - Coverity issue seen with CID: 175365 , in file: /subsys/bluetooth/controller/hci/hci.c |
| * :github:`4032` - Coverity issue seen with CID: 175364 , in file: /subsys/bluetooth/host/mesh/proxy.c |
| * :github:`4033` - Coverity issue seen with CID: 175363 , in file: /subsys/bluetooth/host/smp.c |
| * :github:`4034` - Coverity issue seen with CID: 175362 , in file: /subsys/bluetooth/host/smp.c |
| * :github:`4035` - Coverity issue seen with CID: 175361 , in file: /samples/bluetooth/eddystone/src/main.c |
| * :github:`4036` - Coverity issue seen with CID: 175360 , in file: /subsys/bluetooth/host/mesh/prov.c |
| * :github:`4037` - Coverity issue seen with CID: 175359 , in file: /subsys/bluetooth/host/hci_core.c |
| * :github:`4038` - Coverity issue seen with CID: 175358 , in file: /subsys/bluetooth/host/hci_core.c |
| * :github:`4041` - flashing tinytile and use of minicom |
| * :github:`4043` - Add new user CONFIG to project |
| * :github:`4044` - Livelock in SMP pairing failed scenario |
| * :github:`4046` - BLE Central and BLE Peripheral roles at a moment on nRF52832 |
| * :github:`4048` - HTTP Request Timeout Not Working |
| * :github:`4049` - AMP - Multi-core |
| * :github:`4050` - zephyr.git/tests/kernel/obj_validation/testcase.yaml#test :Evaluation failure |
| * :github:`4051` - Coverity issue seen with CID: 177219 , in file: /drivers/flash/flash_stm32f4x.c |
| * :github:`4054` - [CID: 177215 ], in file: /tests/subsys/dfu/mcuboot/src/main.c |
| * :github:`4055` - Coverity issue seen with CID: 177214 , in file: /samples/boards/microbit/pong/src/ble.c |
| * :github:`4056` - Coverity issue seen with CID: 177213 , in file: /tests/net/ipv6_fragment/src/main.c |
| * :github:`4057` - Coverity issue seen with CID: 170744, in file: /samples/boards/microbit/pong/src/ble.c |
| * :github:`4058` - samples/net/http_client: The HTTP client failed to send the GET request |
| * :github:`4059` - zephyr.git/tests/net/ipv6/testcase.yaml#test :evaluation failed |
| * :github:`4068` - [BLE, nRF51822] Error -ENOMEM when use bt_gatt_write_without_response function |
| * :github:`4099` - Add some docs to samples/net/ieee802154/hw |
| * :github:`4131` - gen_syscalls.py may choke on non-ascii chars |
| * :github:`4135` - checkpatch.pl generates warning messages when run w/ perl-5.26 |
| * :github:`4149` - Transition message on jira.zephyrproject.org needed |
| * :github:`4162` - build error in http_get sample |
| * :github:`4165` - ieee802154_uart_pipe.c: warning: return from incompatible pointer type |
| * :github:`4182` - NET_APP_SETTINGS for 15.4 doesn't seem to work (if to trust 15.4 shell) |
| * :github:`4186` - tcf.git/examples/test_network_linux_zephyr.py#_test :Compilation failure |
| * :github:`4188` - samples /net/echo_server:failed to send packets to client |
| * :github:`4189` - ieee802154_settings.c is duplicated in the codebase |
| * :github:`4190` - samples/net/echo_client :failed to send data |
| * :github:`4193` - Zephyr libc(snprintf) is not comply with ISO standard. |
| * :github:`4195` - tests/net/udp/test_udp.py#_ipv4_udp : evaluation failed |
| * :github:`4239` - unit tests broken in sanitycheck |
| * :github:`4249` - where is auto-pts py script of zephyr? |
| * :github:`4258` - samples/net/zoap_server : unable to communicate between zoap client and server |
| * :github:`4264` - Getting started guide for windows: small error |
| * :github:`4289` - samples/mpu/mem_domain_apis_test is broken |
| * :github:`4292` - net: tcp.c: prepare_segment() may unrightly unref packet in case of error |
| * :github:`4295` - Error flashing board STM32373C-EVAL |
| * :github:`4301` - checkpatch.pl false positives block PR merge |
| * :github:`4310` - unable to flash quark_se_c1000_devboard |
| * :github:`4312` - GDB: Ubuntu's default GDB package does not support arm |
| * :github:`4323` - net: tcp.c: prepare_segment() may leak fragments in case of error |
| * :github:`4325` - samples/net/http_client: unable to send the proper http request to Apache server |
| * :github:`4327` - NET_PKT_TX_SLAB_DEFINE, NET_PKT_DATA_POOL_DEFINE description and usage are confusing |
| * :github:`4347` - net: BSD Sockets UDP sendto() impl broke tests/net/socket/udp/ |
| * :github:`4353` - VM-VM qemu networking example crashes often |
| * :github:`4358` - k_queue_poll returns NULL with K_FOREVER |
| * :github:`4366` - memory corruption in test_pipe_api |
| * :github:`4377` - Sniffing traffic in a VM-VM qemu setup crashes with a segfault in the monitor application |
| * :github:`4392` - zephyr/tests/benchmarks/footprint :build Failed |
| * :github:`4394` - Coverity issue seen with CID: 178058 |
| * :github:`4395` - Coverity issue seen with CID: 178059 |
| * :github:`4396` - Coverity issue seen with CID: 178060 |
| * :github:`4397` - Coverity issue seen with CID: 178064 |
| * :github:`4398` - zephyr/tests/crypto/ccm_mode :-Evaluation failed due to esp32 |
| * :github:`4419` - 6LoWPAN - source address uncompress corner case |
| * :github:`4421` - net: Duplicated functionality between net_pkt_get_src_addr() and net_context.c:create_sockaddr() |
| * :github:`4424` - Turning on network debug message w/ LwM2M sample client will result in stack check failure |
| * :github:`4429` - I2C: stm32-i2c-v2 Driver (F0/F3/F7) gets stuck in endless loop when handling restart conditions |
| * :github:`4442` - samples: net: ieee802154: Sample is not working on nRF52840 platform |
| * :github:`4459` - i2c: stm32-i2c-(v1/v2) don't handle i2c_burst_write like expected |
| * :github:`4463` - Some tests and samples are missing a .yaml file |
| * :github:`4466` - warnings building echo_client with nrf5 |
| * :github:`4469` - CI problem with check-compliance.py |
| * :github:`4476` - Multiple build failures with i2c_ll_stm32.c driver |
| * :github:`4480` - Compilation failure for qemu_x86 with CONFIG_DEBUG_INFO=y |
| * :github:`4481` - Build failure with CONFIG_NET_DEBUG_APP=y |
| * :github:`4503` - CONFIG_STACK_SENTINEL inconsistencies |
| * :github:`4538` - Coverity issue seen with CID:174928 |
| * :github:`4539` - Coverity issue seen with CID:173658 |
| * :github:`4540` - Coverity issue seen with CID: 173657 |
| * :github:`4541` - Coverity issue seen with CID: 173653 |
| * :github:`4544` - [BLE Mesh] Error: Failed to advertise using Node ID |
| * :github:`4563` - [BLE Mesh]: How to handle the 'Set" and 'Get' callbacks |
| * :github:`4565` - net_context_recv always fails with timeout=K_FOREVER |
| * :github:`4567` - [BLE Mesh]: Multiple elements in a node |
| * :github:`4569` - LoRa: support LoRa |
| * :github:`4579` - [CID: 178249] Parse warnings in samples/mpu/mem_domain_apis_test/src/main.c |
| * :github:`4580` - Coverity issue seen with CID: 178248 |
| * :github:`4581` - Coverity issue seen with CID: 178247 |
| * :github:`4582` - Coverity issue seen with CID: 178246 |
| * :github:`4583` - [CID: 178245] Parse warnings in samples/mpu/mem_domain_apis_test/src/main.c |
| * :github:`4584` - Coverity issue seen with CID: 178244 |
| * :github:`4585` - Coverity issue seen with CID: 178243 |
| * :github:`4586` - [CID: 178242]: Parse warnings samples/mpu/mem_domain_apis_test/src/main.c |
| * :github:`4587` - Coverity issue seen with CID: 178241 |
| * :github:`4588` - Coverity issue seen with CID: 178240 |
| * :github:`4589` - [coverity] Null pointer dereferences in tests/net/app/src/main.c |
| * :github:`4591` - [CID: 178237] memory corruption in drivers/ieee802154/ieee802154_mcr20a.c |
| * :github:`4592` - Coverity issue seen with CID: 178236 |
| * :github:`4593` - Coverity issue seen with CID: 178235 |
| * :github:`4594` - Coverity issue seen with CID: 178234 |
| * :github:`4595` - Coverity issue seen with CID: 178233 |
| * :github:`4600` - drivers:i2c_ll_stm32_v2: Interrupt mode uses while loops |
| * :github:`4607` - tests/net/socket/udp/ is broken, again |
| * :github:`4630` - Sample app 'coaps_server' fails to parse coap pkt |
| * :github:`4637` - [Coverity CID: 178334] Null pointer dereferences in /subsys/usb/class/netusb/function_ecm.c |
| * :github:`4638` - build is failing when newlib is enabled |
| * :github:`4644` - Kconfig warnings when building any sample for nRF5x |
| * :github:`4652` - Document "make flash" in the "application development primer" |
| * :github:`4654` - Wrong file name for drivers/aio/aio_comparator_handlers.o |
| * :github:`4667` - x86 boards need device trees |
| * :github:`4668` - drivers/random/random_handlers.c is built when no random driver has been kconfig'ed into the build |
| * :github:`4683` - net: tcp tcp_retry_expired cause assert |
| * :github:`4695` - samples/net/ieee802154 needs documentation |
| * :github:`4697` - [regression] net: echo_server doesn't accept IPv4 connections |
| * :github:`4738` - ble-mesh: proxy.c : Is clients-> conn a clerical error? it should be client-> conn? |
| * :github:`4744` - tests/net/ieee802154/l2/testcase.yaml#test : unable to acknowledge data from receiver |
| * :github:`4757` - kw41z-frdm: assertion failure while setting IRQ priority |
| * :github:`4759` - [PTS] GATT/CL/GAW/BV-02-C fails with INCONC |
| * :github:`4760` - stm32f4_disco and frdm_k64f samples/basic/blink_led ,Choose supported PWM driver |
| * :github:`4766` - tests: mem_pool: Fixed memory pool test case failure on quark d2000 |
| * :github:`4780` - [Coverity CID: 178794] Error handling issues in /tests/subsys/dfu/mcuboot/src/main.c |
| * :github:`4781` - [Coverity CID: 178793] Incorrect expression in /tests/kernel/static_idt/src/static_idt.c |
| * :github:`4782` - [Coverity CID: 178792] Memory - illegal accesses in /subsys/net/lib/http/http_app_server.c |
| * :github:`4783` - [Coverity CID: 178791] Incorrect expression in /tests/kernel/static_idt/src/static_idt.c |
| * :github:`4784` - [Coverity CID: 178790] Memory - corruptions in /samples/net/http_server/src/main.c |
| * :github:`4785` - [Coverity CID: 178789] Null pointer dereferences in /samples/net/http_server/src/main.c |
| * :github:`4786` - [Coverity CID: 178788] Control flow issues in /tests/net/context/src/main.c |
| * :github:`4787` - [Coverity CID: 178787] Null pointer dereferences in /subsys/net/ip/net_context.c |
| * :github:`4788` - [Coverity CID:178786] Memory - corruptions in /samples/net/http_server/src/main.c |
| * :github:`4789` - [Coverity CID: 178785] Incorrect expression in /tests/kernel/static_idt/src/static_idt.c |
| * :github:`4791` - rpl-node uses testcase.ini instead of sample.yaml format |
| * :github:`4825` - Bluetooth IPSP error with qemu_x86 |
| * :github:`4827` - Ping command crashes kernel over qemu_x86 |
| * :github:`4841` - fix doc/devices/dts/device_tree.rst path and Make references |
| * :github:`4844` - cmake: can't flash stm32 with openocd |
| * :github:`4847` - custom 404 error page not being shown on docs.zephyrproject.org |
| * :github:`4853` - cmake: building unit test cases ignore EXTRA_* settings |
| * :github:`4864` - cmake: hts221 sensor sample not working anymore |
| * :github:`4881` - device_get_binding() returns failure in sample/drivers/crypto |
| * :github:`4889` - Flashing EM Starterkit with EM7D fails on master |
| * :github:`4899` - Convert opensda doc to CMake |
| * :github:`4901` - net: tcp: RST is sent after last ack is received |
| * :github:`4904` - cmake: BOOT_BANNER disappeared |
| * :github:`4905` - cmake: flashing for quark_se_devboard is broken |
| * :github:`4910` - BT host CMakeLists.txt code should be agnostic to the FS implementation |
| * :github:`4912` - Not using the Zephyr SDK is broken |
| * :github:`4925` - application_development test pollutes source directory |
| * :github:`4936` - net: 15.4 MAC addresses are shown differently between shell "net iface" and "ieee15_4 get_ext_addr" |
| * :github:`4937` - ESP32 can't boot |
| * :github:`4975` - Getting started documentation for Mac OS X inconsistent |
| * :github:`5004` - Normalize IEEE802514 driver "raw" mode. |
| * :github:`5008` - system call headers are not properly regenerated in CMake on incremental builds |
| * :github:`5009` - cmake creates too many build artifacts |
| * :github:`5014` - samples/drivers/crypto :Unable to find crypto device |
| * :github:`5019` - tests/kernel/mem_protect/stackprot : input string is long stack overflow |
| * :github:`5025` - arduino_due not generating proper config with cmake (crash) |
| * :github:`5026` - k_poll() documentation is wrong |
| * :github:`5040` - Bluetooth mesh API documentation incomplete |
| * :github:`5047` - document error: getting_started.rst |
| * :github:`5051` - Verify doxygen documented APIs are in the generated docs |
| * :github:`5055` - [Coverity CID: 179254] Possible Control flow issues in /samples/net/zperf/src/zperf_udp_receiver.c |
| * :github:`5056` - [Coverity CID: 179253] Control flow issues in /samples/net/zperf/src/zperf_tcp_receiver.c |
| * :github:`5057` - [Coverity CID: 179252] Null pointer dereferences in /samples/net/zperf/src/zperf_udp_receiver.c |
| * :github:`5058` - [Coverity CID: 179251] Control flow issues in /samples/net/zperf/src/zperf_udp_receiver.c |
| * :github:`5059` - [Coverity CID: 179250] Null pointer dereferences in /samples/net/zperf/src/zperf_udp_uploader.c |
| * :github:`5060` - [Coverity CID: 179249] Incorrect expression in /tests/kernel/fatal/src/main.c |
| * :github:`5061` - [Coverity CID: 179248] Control flow issues in /samples/net/zperf/src/zperf_tcp_receiver.c |
| * :github:`5062` - [Coverity CID: 179247] Incorrect expression in /tests/kernel/fatal/src/main.c |
| * :github:`5063` - samples/bluetooth: central_hr sample app is not connecting with peripheral sample app on arduino_101. |
| * :github:`5085` - bug: dts: stm32f1: wrong pinctrl base address |
| * :github:`5087` - Samples/bluetooth: Failed to connect with eddystone sample app on arduino_101. |
| * :github:`5090` - no makefile in zephyr/samples/bluetooth/mesh examples |
| * :github:`5097` - zephyr_library_*() configuration has lower precedence than global zephyr_*() configuration |
| * :github:`5107` - Default partition addressing for nrf52_pca10040 is incompatible |
| * :github:`5116` - [Coverity CID: 179986] Null pointer dereferences in /subsys/bluetooth/host/mesh/access.c |
| * :github:`5117` - [Coverity CID: 179985] Error handling issues in /subsys/bluetooth/host/mesh/cfg_srv.c |
| * :github:`5118` - [Coverity CID: 179984] Memory - corruptions in /drivers/ethernet/eth_mcux.c |
| * :github:`5119` - [Coverity CID: 179983] Error handling issues in /subsys/bluetooth/host/mesh/cfg_srv.c |
| * :github:`5120` - [Coverity CID: 179982] Error handling issues in /subsys/bluetooth/host/mesh/cfg_srv.c |
| * :github:`5121` - [Coverity CID: 179981] Incorrect expression in /drivers/ieee802154/ieee802154_kw41z.c |
| * :github:`5122` - [Coverity CID: 179980] Integer handling issues in /subsys/bluetooth/host/mesh/friend.c |
| * :github:`5123` - [Coverity CID: 179979] Error handling issues in /subsys/bluetooth/host/mesh/cfg_srv.c |
| * :github:`5124` - [Coverity CID: 179978] Error handling issues in /subsys/bluetooth/host/mesh/health_srv.c |
| * :github:`5125` - [Coverity CID: 179976] Error handling issues in /subsys/bluetooth/host/mesh/cfg_srv.c |
| * :github:`5126` - [Coverity CID: 179975] Error handling issues in /subsys/bluetooth/host/mesh/health_srv.c |
| * :github:`5127` - [Coverity CID: 179974] Error handling issues in /subsys/bluetooth/host/mesh/cfg_srv.c |
| * :github:`5128` - [Coverity CID: 179973] Error handling issues in /subsys/bluetooth/host/mesh/cfg_srv.c |
| * :github:`5140` - CMake migration regressed (changed behavior) of QEMU_PTY=1 |
| * :github:`5144` - BUG: cmake: make doesn't update zephyr.hex file |
| * :github:`5145` - samples/bluetooth: Connection failure on peripheral CSC with Arduino 101 |
| * :github:`5152` - CONFIG_CPLUSPLUS is incompatible with the zephyr_get_* API |
| * :github:`5159` - [nrf] Button example for nrf5x boards latches GPIO after 1 button press |
| * :github:`5176` - zephyr-v1.9.2 tag missing |
| * :github:`5177` - hci_usb: Linking error |
| * :github:`5184` - kernel system call handlers missing due to -Wl,--no-whole-archive |
| * :github:`5186` - gen_syscall_header_py is being run at the wrong time |
| * :github:`5189` - tests/subsys/fs/nffs_fs_api:-Evaluation failed |
| * :github:`5207` - Bluetooth subsystem uses acl_in_pool even for controllers not supporting flow control |
| * :github:`5211` - Kconfig: CPU_HAS_FPU dependencies problem |
| * :github:`5223` - CMake: Recent changes broke 3rd-party build system integration again |
| * :github:`5265` - ROM size increase due Zephyr compile options not stripping unused functions |
| * :github:`5266` - Ensure the Licensing page is up-to-date for the release |
| * :github:`5286` - NET_L2: Symbols from the L2 implementation layer are exposed to users of L2 |
| * :github:`5298` - Endless loop in uart pipe |
