| /* |
| * Copyright (c) 2015, Freescale Semiconductor, Inc. |
| * Copyright 2016-2017 NXP |
| * All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include "fsl_rnga.h" |
| |
| #if defined(FSL_FEATURE_SOC_RNG_COUNT) && FSL_FEATURE_SOC_RNG_COUNT |
| |
| /******************************************************************************* |
| * Definitions |
| *******************************************************************************/ |
| |
| /* Component ID definition, used by tools. */ |
| #ifndef FSL_COMPONENT_ID |
| #define FSL_COMPONENT_ID "platform.drivers.rnga" |
| #endif |
| |
| /******************************************************************************* |
| * RNG_CR - RNGA Control Register |
| ******************************************************************************/ |
| /*! |
| * @brief RNG_CR - RNGA Control Register (RW) |
| * |
| * Reset value: 0x00000000U |
| * |
| * Controls the operation of RNGA. |
| */ |
| /*! |
| * @name Constants and macros for entire RNG_CR register |
| */ |
| /*@{*/ |
| #define RNG_CR_REG(base) ((base)->CR) |
| #define RNG_RD_CR(base) (RNG_CR_REG(base)) |
| #define RNG_WR_CR(base, value) (RNG_CR_REG(base) = (value)) |
| #define RNG_RMW_CR(base, mask, value) (RNG_WR_CR(base, (RNG_RD_CR(base) & ~(mask)) | (value))) |
| /*@}*/ |
| |
| /*! |
| * @name Register RNG_CR, field GO[0] (RW) |
| * |
| * Specifies whether random-data generation and loading (into OR[RANDOUT]) is |
| * enabled.This field is sticky. You must reset RNGA to stop RNGA from loading |
| * OR[RANDOUT] with data. |
| * |
| * Values: |
| * - 0b0 - Disabled |
| * - 0b1 - Enabled |
| */ |
| /*@{*/ |
| /*! @brief Read current value of the RNG_CR_GO field. */ |
| #define RNG_RD_CR_GO(base) ((RNG_CR_REG(base) & RNG_CR_GO_MASK) >> RNG_CR_GO_SHIFT) |
| |
| /*! @brief Set the GO field to a new value. */ |
| #define RNG_WR_CR_GO(base, value) (RNG_RMW_CR(base, RNG_CR_GO_MASK, RNG_CR_GO(value))) |
| /*@}*/ |
| |
| /*! |
| * @name Register RNG_CR, field SLP[4] (RW) |
| * |
| * Specifies whether RNGA is in Sleep or Normal mode. You can also enter Sleep |
| * mode by asserting the DOZE signal. |
| * |
| * Values: |
| * - 0b0 - Normal mode |
| * - 0b1 - Sleep (low-power) mode |
| */ |
| /*@{*/ |
| /*! @brief Read current value of the RNG_CR_SLP field. */ |
| #define RNG_RD_CR_SLP(base) ((RNG_CR_REG(base) & RNG_CR_SLP_MASK) >> RNG_CR_SLP_SHIFT) |
| |
| /*! @brief Set the SLP field to a new value. */ |
| #define RNG_WR_CR_SLP(base, value) (RNG_RMW_CR(base, RNG_CR_SLP_MASK, RNG_CR_SLP(value))) |
| /*@}*/ |
| |
| /******************************************************************************* |
| * RNG_SR - RNGA Status Register |
| ******************************************************************************/ |
| #define RNG_SR_REG(base) ((base)->SR) |
| |
| /*! |
| * @name Register RNG_SR, field OREG_LVL[15:8] (RO) |
| * |
| * Indicates the number of random-data words that are in OR[RANDOUT], which |
| * indicates whether OR[RANDOUT] is valid.If you read OR[RANDOUT] when SR[OREG_LVL] |
| * is not 0, then the contents of a random number contained in OR[RANDOUT] are |
| * returned, and RNGA writes 0 to both OR[RANDOUT] and SR[OREG_LVL]. |
| * |
| * Values: |
| * - 0b00000000 - No words (empty) |
| * - 0b00000001 - One word (valid) |
| */ |
| /*@{*/ |
| /*! @brief Read current value of the RNG_SR_OREG_LVL field. */ |
| #define RNG_RD_SR_OREG_LVL(base) ((RNG_SR_REG(base) & RNG_SR_OREG_LVL_MASK) >> RNG_SR_OREG_LVL_SHIFT) |
| /*@}*/ |
| |
| /*! |
| * @name Register RNG_SR, field SLP[4] (RO) |
| * |
| * Specifies whether RNGA is in Sleep or Normal mode. You can also enter Sleep |
| * mode by asserting the DOZE signal. |
| * |
| * Values: |
| * - 0b0 - Normal mode |
| * - 0b1 - Sleep (low-power) mode |
| */ |
| /*@{*/ |
| /*! @brief Read current value of the RNG_SR_SLP field. */ |
| #define RNG_RD_SR_SLP(base) ((RNG_SR_REG(base) & RNG_SR_SLP_MASK) >> RNG_SR_SLP_SHIFT) |
| /*@}*/ |
| |
| /******************************************************************************* |
| * RNG_OR - RNGA Output Register |
| ******************************************************************************/ |
| /*! |
| * @brief RNG_OR - RNGA Output Register (RO) |
| * |
| * Reset value: 0x00000000U |
| * |
| * Stores a random-data word generated by RNGA. |
| */ |
| /*! |
| * @name Constants and macros for entire RNG_OR register |
| */ |
| /*@{*/ |
| #define RNG_OR_REG(base) ((base)->OR) |
| #define RNG_RD_OR(base) (RNG_OR_REG(base)) |
| /*@}*/ |
| |
| /******************************************************************************* |
| * RNG_ER - RNGA Entropy Register |
| ******************************************************************************/ |
| /*! |
| * @brief RNG_ER - RNGA Entropy Register (WORZ) |
| * |
| * Reset value: 0x00000000U |
| * |
| * Specifies an entropy value that RNGA uses in addition to its ring oscillators |
| * to seed its pseudorandom algorithm. This is a write-only register; reads |
| * return all zeros. |
| */ |
| /*! |
| * @name Constants and macros for entire RNG_ER register |
| */ |
| /*@{*/ |
| #define RNG_ER_REG(base) ((base)->ER) |
| #define RNG_RD_ER(base) (RNG_ER_REG(base)) |
| #define RNG_WR_ER(base, value) (RNG_ER_REG(base) = (value)) |
| /*@}*/ |
| |
| /******************************************************************************* |
| * Prototypes |
| *******************************************************************************/ |
| |
| static uint32_t rnga_ReadEntropy(RNG_Type *base); |
| |
| /******************************************************************************* |
| * Code |
| ******************************************************************************/ |
| |
| /*! |
| * brief Initializes the RNGA. |
| * |
| * This function initializes the RNGA. |
| * When called, the RNGA entropy generation starts immediately. |
| * |
| * param base RNGA base address |
| */ |
| void RNGA_Init(RNG_Type *base) |
| { |
| #if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) |
| /* Enable the clock gate. */ |
| CLOCK_EnableClock(kCLOCK_Rnga0); |
| #endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */ |
| CLOCK_DisableClock(kCLOCK_Rnga0); /* To solve the release version on twrkm43z75m */ |
| #if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) |
| CLOCK_EnableClock(kCLOCK_Rnga0); |
| #endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */ |
| |
| /* Reset the registers for RNGA module to reset state. */ |
| RNG_WR_CR(base, 0); |
| /* Enables the RNGA random data generation and loading.*/ |
| RNG_WR_CR_GO(base, 1); |
| } |
| |
| /*! |
| * brief Shuts down the RNGA. |
| * |
| * This function shuts down the RNGA. |
| * |
| * param base RNGA base address |
| */ |
| void RNGA_Deinit(RNG_Type *base) |
| { |
| #if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) |
| /* Disable the clock for RNGA module.*/ |
| CLOCK_DisableClock(kCLOCK_Rnga0); |
| #endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */ |
| } |
| |
| /*! |
| * @brief Get a random data from RNGA. |
| * |
| * @param base RNGA base address |
| */ |
| static uint32_t rnga_ReadEntropy(RNG_Type *base) |
| { |
| uint32_t data = 0; |
| if (RNGA_GetMode(base) == kRNGA_ModeNormal) /* Is in normal mode.*/ |
| { |
| /* Wait for valid random-data.*/ |
| while (RNG_RD_SR_OREG_LVL(base) == 0) |
| { |
| } |
| data = RNG_RD_OR(base); |
| } |
| /* Get random-data word generated by RNGA.*/ |
| return data; |
| } |
| |
| /*! |
| * brief Gets random data. |
| * |
| * This function gets random data from the RNGA. |
| * |
| * param base RNGA base address |
| * param data pointer to user buffer to be filled by random data |
| * param data_size size of data in bytes |
| * return RNGA status |
| */ |
| status_t RNGA_GetRandomData(RNG_Type *base, void *data, size_t data_size) |
| { |
| status_t result = kStatus_Success; |
| uint32_t random_32; |
| uint8_t *random_p; |
| uint32_t random_size; |
| uint8_t *data_p = (uint8_t *)data; |
| uint32_t i; |
| |
| /* Check input parameters.*/ |
| if (base && data && data_size) |
| { |
| do |
| { |
| /* Read Entropy.*/ |
| random_32 = rnga_ReadEntropy(base); |
| |
| random_p = (uint8_t *)&random_32; |
| |
| if (data_size < sizeof(random_32)) |
| { |
| random_size = data_size; |
| } |
| else |
| { |
| random_size = sizeof(random_32); |
| } |
| |
| for (i = 0; i < random_size; i++) |
| { |
| *data_p++ = *random_p++; |
| } |
| |
| data_size -= random_size; |
| } while (data_size > 0); |
| } |
| else |
| { |
| result = kStatus_InvalidArgument; |
| } |
| |
| return result; |
| } |
| |
| /*! |
| * brief Sets the RNGA in normal mode or sleep mode. |
| * |
| * This function sets the RNGA in sleep mode or normal mode. |
| * |
| * param base RNGA base address |
| * param mode normal mode or sleep mode |
| */ |
| void RNGA_SetMode(RNG_Type *base, rnga_mode_t mode) |
| { |
| RNG_WR_CR_SLP(base, (uint32_t)mode); |
| } |
| |
| /*! |
| * brief Gets the RNGA working mode. |
| * |
| * This function gets the RNGA working mode. |
| * |
| * param base RNGA base address |
| * return normal mode or sleep mode |
| */ |
| rnga_mode_t RNGA_GetMode(RNG_Type *base) |
| { |
| return (rnga_mode_t)RNG_RD_SR_SLP(base); |
| } |
| |
| /*! |
| * brief Feeds the RNGA module. |
| * |
| * This function inputs an entropy value that the RNGA uses to seed its |
| * pseudo-random algorithm. |
| * |
| * param base RNGA base address |
| * param seed input seed value |
| */ |
| void RNGA_Seed(RNG_Type *base, uint32_t seed) |
| { |
| /* Write to RNGA Entropy Register.*/ |
| RNG_WR_ER(base, seed); |
| } |
| |
| #endif /* FSL_FEATURE_SOC_RNG_COUNT */ |