drivers/gpio/gpio_nct38xx_port.c - third_party/github/zephyrproject-rtos/zephyr - Git at Google

 /*
  * Copyright (c) 2021 Nuvoton Technology Corporation.
  *
  * SPDX-License-Identifier: Apache-2.0
  */

 #define DT_DRV_COMPAT nuvoton_nct38xx_gpio_port

 #include <zephyr/drivers/gpio.h>

 #include "gpio_nct38xx.h"
 #include "gpio_utils.h"

 #include <zephyr/logging/log.h>
 LOG_MODULE_DECLARE(gpio_ntc38xx, CONFIG_GPIO_LOG_LEVEL);

 /* Driver config */
 struct gpio_nct38xx_port_config {
 	/* gpio_driver_config needs to be first */
 	struct gpio_driver_config common;
 	/* NCT38XX controller dev */
 	const struct device *nct38xx_dev;
 	/* GPIO port index */
 	uint8_t gpio_port;
 	/* GPIO port 0 pinmux mask */
 	uint8_t pinmux_mask;
 };

 /* Driver data */
 struct gpio_nct38xx_port_data {
 	/* gpio_driver_data needs to be first */
 	struct gpio_driver_data common;
 	/* GPIO callback list */
 	sys_slist_t cb_list_gpio;
 	/* lock GPIO register access */
 	struct k_sem lock;
 };

 /* GPIO api functions */
 static int gpio_nct38xx_pin_config(const struct device *dev, gpio_pin_t pin, gpio_flags_t flags)
 {
 	const struct gpio_nct38xx_port_config *const config = dev->config;
 	struct gpio_nct38xx_port_data *const data = dev->data;
 	uint32_t mask = BIT(pin);
 	uint8_t reg, new_reg;
 	int ret;

 	/* Don't support simultaneous in/out mode */
 	if (((flags & GPIO_INPUT) != 0) && ((flags & GPIO_OUTPUT) != 0)) {
 		return -ENOTSUP;
 	}

 	/* Don't support "open source" mode */
 	if (((flags & GPIO_SINGLE_ENDED) != 0) && ((flags & GPIO_LINE_OPEN_DRAIN) == 0)) {
 		return -ENOTSUP;
 	}

 	/* Don't support pull-up/pull-down */
 	if (((flags & GPIO_PULL_UP) != 0) || ((flags & GPIO_PULL_DOWN) != 0)) {
 		return -ENOTSUP;
 	}

 	k_sem_take(&data->lock, K_FOREVER);

 	/* Pin multiplexing */
 	if (config->gpio_port == 0) {
 		ret = nct38xx_reg_read_byte(config->nct38xx_dev, NCT38XX_REG_MUX_CONTROL, &reg);
 		if (ret < 0) {
 			goto done;
 		}

 		new_reg = reg | mask;
 		/* NCT3807 bit3 should be set to 0 */
 		new_reg &= config->pinmux_mask;

 		ret = nct38xx_reg_update(config->nct38xx_dev, NCT38XX_REG_MUX_CONTROL, reg,
 					 new_reg);
 		if (ret < 0) {
 			goto done;
 		}
 	}

 	/* Configure pin as input. */
 	if (flags & GPIO_INPUT) {
 		ret = nct38xx_reg_read_byte(config->nct38xx_dev,
 					    NCT38XX_REG_GPIO_DIR(config->gpio_port), &reg);
 		if (ret < 0) {
 			goto done;
 		}
 		new_reg = reg & ~mask;
 		ret = nct38xx_reg_update(config->nct38xx_dev,
 					 NCT38XX_REG_GPIO_DIR(config->gpio_port), reg, new_reg);

 		k_sem_give(&data->lock);
 		return ret;
 	}

 	/* Select open drain 0:push-pull 1:open-drain */
 	ret = nct38xx_reg_read_byte(config->nct38xx_dev, NCT38XX_REG_GPIO_OD_SEL(config->gpio_port),
 				    &reg);
 	if (ret < 0) {
 		goto done;
 	}
 	if (flags & GPIO_OPEN_DRAIN) {
 		new_reg = reg | mask;
 	} else {
 		new_reg = reg & ~mask;
 	}
 	ret = nct38xx_reg_update(config->nct38xx_dev, NCT38XX_REG_GPIO_OD_SEL(config->gpio_port),
 				 reg, new_reg);
 	if (ret < 0) {
 		goto done;
 	}

 	/* Set level 0:low 1:high */
 	nct38xx_reg_read_byte(config->nct38xx_dev, NCT38XX_REG_GPIO_DATA_OUT(config->gpio_port),
 			      &reg);
 	if (ret < 0) {
 		goto done;
 	}
 	if (flags & GPIO_OUTPUT_INIT_HIGH) {
 		new_reg = reg | mask;
 	} else if (flags & GPIO_OUTPUT_INIT_LOW) {
 		new_reg = reg & ~mask;
 	}
 	ret = nct38xx_reg_update(config->nct38xx_dev, NCT38XX_REG_GPIO_DATA_OUT(config->gpio_port),
 				 reg, new_reg);
 	if (ret < 0) {
 		goto done;
 	}

 	/* Configure pin as output, if requested 0:input 1:output */
 	if (flags & GPIO_OUTPUT) {
 		nct38xx_reg_read_byte(config->nct38xx_dev, NCT38XX_REG_GPIO_DIR(config->gpio_port),
 				      &reg);
 		if (ret < 0) {
 			goto done;
 		}
 		new_reg = reg | mask;
 		ret = nct38xx_reg_update(config->nct38xx_dev,
 					 NCT38XX_REG_GPIO_DIR(config->gpio_port), reg, new_reg);
 	}

 done:
 	k_sem_give(&data->lock);
 	return ret;
 }

 static int gpio_nct38xx_port_get_raw(const struct device *dev, gpio_port_value_t *value)
 {
 	const struct gpio_nct38xx_port_config *const config = dev->config;

 	return nct38xx_reg_read_byte(config->nct38xx_dev,
 				     NCT38XX_REG_GPIO_DATA_IN(config->gpio_port), (uint8_t *)value);
 }

 static int gpio_nct38xx_port_set_masked_raw(const struct device *dev, gpio_port_pins_t mask,
 					    gpio_port_value_t value)
 {
 	const struct gpio_nct38xx_port_config *const config = dev->config;
 	struct gpio_nct38xx_port_data *const data = dev->data;
 	uint8_t reg, new_reg;
 	int ret;

 	k_sem_take(&data->lock, K_FOREVER);

 	ret = nct38xx_reg_read_byte(config->nct38xx_dev,
 				    NCT38XX_REG_GPIO_DATA_OUT(config->gpio_port), &reg);
 	if (ret < 0) {
 		goto done;
 	}
 	new_reg = ((reg & ~mask) | (value & mask));
 	ret = nct38xx_reg_update(config->nct38xx_dev, NCT38XX_REG_GPIO_DATA_OUT(config->gpio_port),
 				 reg, new_reg);

 done:
 	k_sem_give(&data->lock);

 	return ret;
 }

 static int gpio_nct38xx_port_set_bits_raw(const struct device *dev, gpio_port_pins_t mask)
 {
 	const struct gpio_nct38xx_port_config *const config = dev->config;
 	struct gpio_nct38xx_port_data *const data = dev->data;
 	uint8_t reg, new_reg;
 	int ret;

 	k_sem_take(&data->lock, K_FOREVER);

 	ret = nct38xx_reg_read_byte(config->nct38xx_dev,
 				    NCT38XX_REG_GPIO_DATA_OUT(config->gpio_port), &reg);
 	if (ret < 0) {
 		goto done;
 	}
 	new_reg = reg | mask;
 	ret = nct38xx_reg_update(config->nct38xx_dev, NCT38XX_REG_GPIO_DATA_OUT(config->gpio_port),
 				 reg, new_reg);

 done:
 	k_sem_give(&data->lock);

 	return ret;
 }

 static int gpio_nct38xx_port_clear_bits_raw(const struct device *dev, gpio_port_pins_t mask)
 {
 	const struct gpio_nct38xx_port_config *const config = dev->config;
 	struct gpio_nct38xx_port_data *const data = dev->data;
 	uint8_t reg, new_reg;
 	int ret;

 	k_sem_take(&data->lock, K_FOREVER);

 	ret = nct38xx_reg_read_byte(config->nct38xx_dev,
 				    NCT38XX_REG_GPIO_DATA_OUT(config->gpio_port), &reg);
 	if (ret < 0) {
 		goto done;
 	}
 	new_reg = reg & ~mask;
 	ret = nct38xx_reg_update(config->nct38xx_dev, NCT38XX_REG_GPIO_DATA_OUT(config->gpio_port),
 				 reg, new_reg);

 done:
 	k_sem_give(&data->lock);

 	return ret;
 }

 static int gpio_nct38xx_port_toggle_bits(const struct device *dev, gpio_port_pins_t mask)
 {
 	const struct gpio_nct38xx_port_config *const config = dev->config;
 	struct gpio_nct38xx_port_data *const data = dev->data;
 	uint8_t reg, new_reg;
 	int ret;

 	k_sem_take(&data->lock, K_FOREVER);

 	ret = nct38xx_reg_read_byte(config->nct38xx_dev,
 				    NCT38XX_REG_GPIO_DATA_OUT(config->gpio_port), &reg);
 	if (ret < 0) {
 		goto done;
 	}
 	new_reg = reg ^ mask;
 	ret = nct38xx_reg_update(config->nct38xx_dev, NCT38XX_REG_GPIO_DATA_OUT(config->gpio_port),
 				 reg, new_reg);

 done:
 	k_sem_give(&data->lock);

 	return ret;
 }

 static int gpio_nct38xx_pin_interrupt_configure(const struct device *dev, gpio_pin_t pin,
 						enum gpio_int_mode mode, enum gpio_int_trig trig)
 {
 	const struct gpio_nct38xx_port_config *const config = dev->config;
 	struct gpio_nct38xx_port_data *const data = dev->data;
 	uint8_t reg, new_reg, rise, new_rise, fall, new_fall;
 	int ret;
 	uint32_t mask = BIT(pin);

 	k_sem_take(&data->lock, K_FOREVER);

 	/* Disable irq before configuring them */
 	ret = nct38xx_reg_read_byte(config->nct38xx_dev,
 				    NCT38XX_REG_GPIO_ALERT_MASK(config->gpio_port), &reg);
 	if (ret < 0) {
 		goto done;
 	}
 	new_reg = reg & ~mask;
 	ret = nct38xx_reg_update(config->nct38xx_dev,
 				 NCT38XX_REG_GPIO_ALERT_MASK(config->gpio_port), reg, new_reg);
 	if (ret < 0) {
 		goto done;
 	}

 	/* Configure and enable interrupt? */
 	if (mode == GPIO_INT_MODE_DISABLED) {
 		goto done;
 	}

 	/* set edge register */
 	ret = nct38xx_reg_read_byte(config->nct38xx_dev,
 				    NCT38XX_REG_GPIO_ALERT_RISE(config->gpio_port), &rise);
 	if (ret < 0) {
 		goto done;
 	}
 	ret = nct38xx_reg_read_byte(config->nct38xx_dev,
 				    NCT38XX_REG_GPIO_ALERT_FALL(config->gpio_port), &fall);
 	if (ret < 0) {
 		goto done;
 	}

 	if (mode == GPIO_INT_MODE_EDGE) {
 		if (trig == GPIO_INT_TRIG_LOW) {
 			new_rise = rise & ~mask;
 			new_fall = fall | mask;
 		} else if (trig == GPIO_INT_TRIG_HIGH) {
 			new_rise = rise | mask;
 			new_fall = fall & ~mask;
 		} else if (trig == GPIO_INT_TRIG_BOTH) {
 			new_rise = rise | mask;
 			new_fall = fall | mask;
 		} else {
 			LOG_ERR("Invalid interrupt trigger type %d", trig);
 			return -EINVAL;
 		}
 	} else {
 		/* level mode */
 		new_rise = rise & ~mask;
 		new_fall = fall & ~mask;
 	}

 	ret = nct38xx_reg_update(config->nct38xx_dev,
 				 NCT38XX_REG_GPIO_ALERT_RISE(config->gpio_port), rise, new_rise);
 	if (ret < 0) {
 		goto done;
 	}

 	ret = nct38xx_reg_update(config->nct38xx_dev,
 				 NCT38XX_REG_GPIO_ALERT_FALL(config->gpio_port), fall, new_fall);
 	if (ret < 0) {
 		goto done;
 	}

 	if (mode == GPIO_INT_MODE_LEVEL) {
 		/* set active high/low */
 		ret = nct38xx_reg_read_byte(config->nct38xx_dev,
 					    NCT38XX_REG_GPIO_ALERT_LEVEL(config->gpio_port), &reg);
 		if (ret < 0) {
 			goto done;
 		}

 		if (trig == GPIO_INT_TRIG_LOW) {
 			new_reg = reg & ~mask;
 		} else if (trig == GPIO_INT_TRIG_HIGH) {
 			new_reg = reg | mask;
 		} else {
 			LOG_ERR("Invalid interrupt trigger type %d", trig);
 			ret = -EINVAL;
 			goto done;
 		}
 		ret = nct38xx_reg_update(config->nct38xx_dev,
 					 NCT38XX_REG_GPIO_ALERT_LEVEL(config->gpio_port), reg,
 					 new_reg);

 		if (ret < 0) {
 			goto done;
 		}
 	}

 	/* Clear pending bit */
 	ret = nct38xx_reg_write_byte(config->nct38xx_dev,
 				     NCT38XX_REG_GPIO_ALERT_STAT(config->gpio_port), mask);
 	if (ret < 0) {
 		goto done;
 	}

 	/* Enable it after configuration is completed */
 	ret = nct38xx_reg_read_byte(config->nct38xx_dev,
 				    NCT38XX_REG_GPIO_ALERT_MASK(config->gpio_port), &reg);
 	if (ret < 0) {
 		goto done;
 	}
 	new_reg = reg | mask;
 	ret = nct38xx_reg_update(config->nct38xx_dev,
 				 NCT38XX_REG_GPIO_ALERT_MASK(config->gpio_port), reg, new_reg);

 done:
 	k_sem_give(&data->lock);

 	return ret;
 }

 static int gpio_nct38xx_manage_callback(const struct device *dev, struct gpio_callback *callback,
 					bool set)
 {
 	struct gpio_nct38xx_port_data *const data = dev->data;

 	return gpio_manage_callback(&data->cb_list_gpio, callback, set);
 }

 int gpio_nct38xx_dispatch_port_isr(const struct device *dev)
 {
 	const struct gpio_nct38xx_port_config *const config = dev->config;
 	struct gpio_nct38xx_port_data *const data = dev->data;
 	uint8_t alert_pins, mask;
 	int ret;

 	do {
 		k_sem_take(&data->lock, K_FOREVER);
 		ret = nct38xx_reg_read_byte(config->nct38xx_dev,
 					    NCT38XX_REG_GPIO_ALERT_STAT(config->gpio_port),
 					    &alert_pins);
 		if (ret < 0) {
 			k_sem_give(&data->lock);
 			return ret;
 		}

 		ret = nct38xx_reg_read_byte(config->nct38xx_dev,
 					    NCT38XX_REG_GPIO_ALERT_MASK(config->gpio_port), &mask);
 		if (ret < 0) {
 			k_sem_give(&data->lock);
 			return ret;
 		}
 		alert_pins &= mask;
 		if (alert_pins) {
 			ret = nct38xx_reg_write_byte(config->nct38xx_dev,
 						     NCT38XX_REG_GPIO_ALERT_STAT(config->gpio_port),
 						     alert_pins);
 			if (ret < 0) {
 				k_sem_give(&data->lock);
 				return ret;
 			}
 		}
 		k_sem_give(&data->lock);

 		gpio_fire_callbacks(&data->cb_list_gpio, dev, alert_pins);

 		/*
 		 * Vendor defined alert is generated if at least one STATn bit
 		 * changes from 0 to 1. We should guarantee the STATn bit is
 		 * clear to 0 before leaving isr.
 		 */
 	} while (alert_pins);

 	return 0;
 }

 static const struct gpio_driver_api gpio_nct38xx_driver = {
 	.pin_configure = gpio_nct38xx_pin_config,
 	.port_get_raw = gpio_nct38xx_port_get_raw,
 	.port_set_masked_raw = gpio_nct38xx_port_set_masked_raw,
 	.port_set_bits_raw = gpio_nct38xx_port_set_bits_raw,
 	.port_clear_bits_raw = gpio_nct38xx_port_clear_bits_raw,
 	.port_toggle_bits = gpio_nct38xx_port_toggle_bits,
 	.pin_interrupt_configure = gpio_nct38xx_pin_interrupt_configure,
 	.manage_callback = gpio_nct38xx_manage_callback,
 };

 static int gpio_nct38xx_port_init(const struct device *dev)
 {
 	const struct gpio_nct38xx_port_config *const config = dev->config;
 	struct gpio_nct38xx_port_data *const data = dev->data;

 	if (!device_is_ready(config->nct38xx_dev)) {
 		LOG_ERR("%s is not ready", config->nct38xx_dev->name);
 		return -ENODEV;
 	}

 	k_sem_init(&data->lock, 1, 1);

 	return 0;
 }

 /* NCT38XX GPIO port driver must be initialized after NCT38XX GPIO driver */
 BUILD_ASSERT(CONFIG_GPIO_NCT38XX_PORT_INIT_PRIORITY > CONFIG_GPIO_NCT38XX_INIT_PRIORITY);

 #define GPIO_NCT38XX_PORT_DEVICE_INSTANCE(inst)                                                    \
 	static const struct gpio_nct38xx_port_config gpio_nct38xx_port_cfg_##inst = {              \
 		.common = { .port_pin_mask = GPIO_PORT_PIN_MASK_FROM_DT_INST(inst) &               \
 					     DT_INST_PROP(inst, pin_mask) },                       \
 		.nct38xx_dev = DEVICE_DT_GET(DT_INST_PARENT(inst)),                                \
 		.gpio_port = DT_INST_REG_ADDR(inst),                                               \
 		.pinmux_mask = COND_CODE_1(DT_INST_NODE_HAS_PROP(inst, pinmux_mask),               \
 					   (DT_INST_PROP(inst, pinmux_mask)), (0)),                \
 	};                                                                                         \
 	BUILD_ASSERT(!(DT_INST_REG_ADDR(inst) == 0 &&                                              \
 		       !(DT_INST_NODE_HAS_PROP(inst, pinmux_mask))),                               \
 		     "Port 0 should assign pinmux_mask property.");                                \
 	static struct gpio_nct38xx_port_data gpio_nct38xx_port_data_##inst;                        \
 	DEVICE_DT_INST_DEFINE(inst, gpio_nct38xx_port_init, NULL, &gpio_nct38xx_port_data_##inst,  \
 			      &gpio_nct38xx_port_cfg_##inst, POST_KERNEL,                          \
 			      CONFIG_GPIO_NCT38XX_PORT_INIT_PRIORITY, &gpio_nct38xx_driver);

 DT_INST_FOREACH_STATUS_OKAY(GPIO_NCT38XX_PORT_DEVICE_INSTANCE)
	/*
	* Copyright (c) 2021 Nuvoton Technology Corporation.
	*
	* SPDX-License-Identifier: Apache-2.0
	*/

	#define DT_DRV_COMPAT nuvoton_nct38xx_gpio_port

	#include <zephyr/drivers/gpio.h>

	#include "gpio_nct38xx.h"
	#include "gpio_utils.h"

	#include <zephyr/logging/log.h>
	LOG_MODULE_DECLARE(gpio_ntc38xx, CONFIG_GPIO_LOG_LEVEL);

	/* Driver config */
	struct gpio_nct38xx_port_config {
	/* gpio_driver_config needs to be first */
	struct gpio_driver_config common;
	/* NCT38XX controller dev */
	const struct device *nct38xx_dev;
	/* GPIO port index */
	uint8_t gpio_port;
	/* GPIO port 0 pinmux mask */
	uint8_t pinmux_mask;
	};

	/* Driver data */
	struct gpio_nct38xx_port_data {
	/* gpio_driver_data needs to be first */
	struct gpio_driver_data common;
	/* GPIO callback list */
	sys_slist_t cb_list_gpio;
	/* lock GPIO register access */
	struct k_sem lock;
	};

	/* GPIO api functions */
	static int gpio_nct38xx_pin_config(const struct device *dev, gpio_pin_t pin, gpio_flags_t flags)
	{
	const struct gpio_nct38xx_port_config *const config = dev->config;
	struct gpio_nct38xx_port_data *const data = dev->data;
	uint32_t mask = BIT(pin);
	uint8_t reg, new_reg;
	int ret;

	/* Don't support simultaneous in/out mode */
	if (((flags & GPIO_INPUT) != 0) && ((flags & GPIO_OUTPUT) != 0)) {
	return -ENOTSUP;
	}

	/* Don't support "open source" mode */
	if (((flags & GPIO_SINGLE_ENDED) != 0) && ((flags & GPIO_LINE_OPEN_DRAIN) == 0)) {
	return -ENOTSUP;
	}

	/* Don't support pull-up/pull-down */
	if (((flags & GPIO_PULL_UP) != 0) \|\| ((flags & GPIO_PULL_DOWN) != 0)) {
	return -ENOTSUP;
	}

	k_sem_take(&data->lock, K_FOREVER);

	/* Pin multiplexing */
	if (config->gpio_port == 0) {
	ret = nct38xx_reg_read_byte(config->nct38xx_dev, NCT38XX_REG_MUX_CONTROL, &reg);
	if (ret < 0) {
	goto done;
	}

	new_reg = reg \| mask;
	/* NCT3807 bit3 should be set to 0 */
	new_reg &= config->pinmux_mask;

	ret = nct38xx_reg_update(config->nct38xx_dev, NCT38XX_REG_MUX_CONTROL, reg,
	new_reg);
	if (ret < 0) {
	goto done;
	}
	}

	/* Configure pin as input. */
	if (flags & GPIO_INPUT) {
	ret = nct38xx_reg_read_byte(config->nct38xx_dev,
	NCT38XX_REG_GPIO_DIR(config->gpio_port), &reg);
	if (ret < 0) {
	goto done;
	}
	new_reg = reg & ~mask;
	ret = nct38xx_reg_update(config->nct38xx_dev,
	NCT38XX_REG_GPIO_DIR(config->gpio_port), reg, new_reg);

	k_sem_give(&data->lock);
	return ret;
	}

	/* Select open drain 0:push-pull 1:open-drain */
	ret = nct38xx_reg_read_byte(config->nct38xx_dev, NCT38XX_REG_GPIO_OD_SEL(config->gpio_port),
	&reg);
	if (ret < 0) {
	goto done;
	}
	if (flags & GPIO_OPEN_DRAIN) {
	new_reg = reg \| mask;
	} else {
	new_reg = reg & ~mask;
	}
	ret = nct38xx_reg_update(config->nct38xx_dev, NCT38XX_REG_GPIO_OD_SEL(config->gpio_port),
	reg, new_reg);
	if (ret < 0) {
	goto done;
	}

	/* Set level 0:low 1:high */
	nct38xx_reg_read_byte(config->nct38xx_dev, NCT38XX_REG_GPIO_DATA_OUT(config->gpio_port),
	&reg);
	if (ret < 0) {
	goto done;
	}
	if (flags & GPIO_OUTPUT_INIT_HIGH) {
	new_reg = reg \| mask;
	} else if (flags & GPIO_OUTPUT_INIT_LOW) {
	new_reg = reg & ~mask;
	}
	ret = nct38xx_reg_update(config->nct38xx_dev, NCT38XX_REG_GPIO_DATA_OUT(config->gpio_port),
	reg, new_reg);
	if (ret < 0) {
	goto done;
	}

	/* Configure pin as output, if requested 0:input 1:output */
	if (flags & GPIO_OUTPUT) {
	nct38xx_reg_read_byte(config->nct38xx_dev, NCT38XX_REG_GPIO_DIR(config->gpio_port),
	&reg);
	if (ret < 0) {
	goto done;
	}
	new_reg = reg \| mask;
	ret = nct38xx_reg_update(config->nct38xx_dev,
	NCT38XX_REG_GPIO_DIR(config->gpio_port), reg, new_reg);
	}

	done:
	k_sem_give(&data->lock);
	return ret;
	}

	static int gpio_nct38xx_port_get_raw(const struct device dev, gpio_port_value_t value)
	{
	const struct gpio_nct38xx_port_config *const config = dev->config;

	return nct38xx_reg_read_byte(config->nct38xx_dev,
	NCT38XX_REG_GPIO_DATA_IN(config->gpio_port), (uint8_t *)value);
	}

	static int gpio_nct38xx_port_set_masked_raw(const struct device *dev, gpio_port_pins_t mask,
	gpio_port_value_t value)
	{
	const struct gpio_nct38xx_port_config *const config = dev->config;
	struct gpio_nct38xx_port_data *const data = dev->data;
	uint8_t reg, new_reg;
	int ret;

	k_sem_take(&data->lock, K_FOREVER);

	ret = nct38xx_reg_read_byte(config->nct38xx_dev,
	NCT38XX_REG_GPIO_DATA_OUT(config->gpio_port), &reg);
	if (ret < 0) {
	goto done;
	}
	new_reg = ((reg & ~mask) \| (value & mask));
	ret = nct38xx_reg_update(config->nct38xx_dev, NCT38XX_REG_GPIO_DATA_OUT(config->gpio_port),
	reg, new_reg);

	done:
	k_sem_give(&data->lock);

	return ret;
	}

	static int gpio_nct38xx_port_set_bits_raw(const struct device *dev, gpio_port_pins_t mask)
	{
	const struct gpio_nct38xx_port_config *const config = dev->config;
	struct gpio_nct38xx_port_data *const data = dev->data;
	uint8_t reg, new_reg;
	int ret;

	k_sem_take(&data->lock, K_FOREVER);

	ret = nct38xx_reg_read_byte(config->nct38xx_dev,
	NCT38XX_REG_GPIO_DATA_OUT(config->gpio_port), &reg);
	if (ret < 0) {
	goto done;
	}
	new_reg = reg \| mask;
	ret = nct38xx_reg_update(config->nct38xx_dev, NCT38XX_REG_GPIO_DATA_OUT(config->gpio_port),
	reg, new_reg);

	done:
	k_sem_give(&data->lock);

	return ret;
	}

	static int gpio_nct38xx_port_clear_bits_raw(const struct device *dev, gpio_port_pins_t mask)
	{
	const struct gpio_nct38xx_port_config *const config = dev->config;
	struct gpio_nct38xx_port_data *const data = dev->data;
	uint8_t reg, new_reg;
	int ret;

	k_sem_take(&data->lock, K_FOREVER);

	ret = nct38xx_reg_read_byte(config->nct38xx_dev,
	NCT38XX_REG_GPIO_DATA_OUT(config->gpio_port), &reg);
	if (ret < 0) {
	goto done;
	}
	new_reg = reg & ~mask;
	ret = nct38xx_reg_update(config->nct38xx_dev, NCT38XX_REG_GPIO_DATA_OUT(config->gpio_port),
	reg, new_reg);

	done:
	k_sem_give(&data->lock);

	return ret;
	}

	static int gpio_nct38xx_port_toggle_bits(const struct device *dev, gpio_port_pins_t mask)
	{
	const struct gpio_nct38xx_port_config *const config = dev->config;
	struct gpio_nct38xx_port_data *const data = dev->data;
	uint8_t reg, new_reg;
	int ret;

	k_sem_take(&data->lock, K_FOREVER);

	ret = nct38xx_reg_read_byte(config->nct38xx_dev,
	NCT38XX_REG_GPIO_DATA_OUT(config->gpio_port), &reg);
	if (ret < 0) {
	goto done;
	}
	new_reg = reg ^ mask;
	ret = nct38xx_reg_update(config->nct38xx_dev, NCT38XX_REG_GPIO_DATA_OUT(config->gpio_port),
	reg, new_reg);

	done:
	k_sem_give(&data->lock);

	return ret;
	}

	static int gpio_nct38xx_pin_interrupt_configure(const struct device *dev, gpio_pin_t pin,
	enum gpio_int_mode mode, enum gpio_int_trig trig)
	{
	const struct gpio_nct38xx_port_config *const config = dev->config;
	struct gpio_nct38xx_port_data *const data = dev->data;
	uint8_t reg, new_reg, rise, new_rise, fall, new_fall;
	int ret;
	uint32_t mask = BIT(pin);

	k_sem_take(&data->lock, K_FOREVER);

	/* Disable irq before configuring them */
	ret = nct38xx_reg_read_byte(config->nct38xx_dev,
	NCT38XX_REG_GPIO_ALERT_MASK(config->gpio_port), &reg);
	if (ret < 0) {
	goto done;
	}
	new_reg = reg & ~mask;
	ret = nct38xx_reg_update(config->nct38xx_dev,
	NCT38XX_REG_GPIO_ALERT_MASK(config->gpio_port), reg, new_reg);
	if (ret < 0) {
	goto done;
	}

	/* Configure and enable interrupt? */
	if (mode == GPIO_INT_MODE_DISABLED) {
	goto done;
	}

	/* set edge register */
	ret = nct38xx_reg_read_byte(config->nct38xx_dev,
	NCT38XX_REG_GPIO_ALERT_RISE(config->gpio_port), &rise);
	if (ret < 0) {
	goto done;
	}
	ret = nct38xx_reg_read_byte(config->nct38xx_dev,
	NCT38XX_REG_GPIO_ALERT_FALL(config->gpio_port), &fall);
	if (ret < 0) {
	goto done;
	}

	if (mode == GPIO_INT_MODE_EDGE) {
	if (trig == GPIO_INT_TRIG_LOW) {
	new_rise = rise & ~mask;
	new_fall = fall \| mask;
	} else if (trig == GPIO_INT_TRIG_HIGH) {
	new_rise = rise \| mask;
	new_fall = fall & ~mask;
	} else if (trig == GPIO_INT_TRIG_BOTH) {
	new_rise = rise \| mask;
	new_fall = fall \| mask;
	} else {
	LOG_ERR("Invalid interrupt trigger type %d", trig);
	return -EINVAL;
	}
	} else {
	/* level mode */
	new_rise = rise & ~mask;
	new_fall = fall & ~mask;
	}

	ret = nct38xx_reg_update(config->nct38xx_dev,
	NCT38XX_REG_GPIO_ALERT_RISE(config->gpio_port), rise, new_rise);
	if (ret < 0) {
	goto done;
	}

	ret = nct38xx_reg_update(config->nct38xx_dev,
	NCT38XX_REG_GPIO_ALERT_FALL(config->gpio_port), fall, new_fall);
	if (ret < 0) {
	goto done;
	}

	if (mode == GPIO_INT_MODE_LEVEL) {
	/* set active high/low */
	ret = nct38xx_reg_read_byte(config->nct38xx_dev,
	NCT38XX_REG_GPIO_ALERT_LEVEL(config->gpio_port), &reg);
	if (ret < 0) {
	goto done;
	}

	if (trig == GPIO_INT_TRIG_LOW) {
	new_reg = reg & ~mask;
	} else if (trig == GPIO_INT_TRIG_HIGH) {
	new_reg = reg \| mask;
	} else {
	LOG_ERR("Invalid interrupt trigger type %d", trig);
	ret = -EINVAL;
	goto done;
	}
	ret = nct38xx_reg_update(config->nct38xx_dev,
	NCT38XX_REG_GPIO_ALERT_LEVEL(config->gpio_port), reg,
	new_reg);

	if (ret < 0) {
	goto done;
	}
	}

	/* Clear pending bit */
	ret = nct38xx_reg_write_byte(config->nct38xx_dev,
	NCT38XX_REG_GPIO_ALERT_STAT(config->gpio_port), mask);
	if (ret < 0) {
	goto done;
	}

	/* Enable it after configuration is completed */
	ret = nct38xx_reg_read_byte(config->nct38xx_dev,
	NCT38XX_REG_GPIO_ALERT_MASK(config->gpio_port), &reg);
	if (ret < 0) {
	goto done;
	}
	new_reg = reg \| mask;
	ret = nct38xx_reg_update(config->nct38xx_dev,
	NCT38XX_REG_GPIO_ALERT_MASK(config->gpio_port), reg, new_reg);

	done:
	k_sem_give(&data->lock);

	return ret;
	}

	static int gpio_nct38xx_manage_callback(const struct device dev, struct gpio_callback callback,
	bool set)
	{
	struct gpio_nct38xx_port_data *const data = dev->data;

	return gpio_manage_callback(&data->cb_list_gpio, callback, set);
	}

	int gpio_nct38xx_dispatch_port_isr(const struct device *dev)
	{
	const struct gpio_nct38xx_port_config *const config = dev->config;
	struct gpio_nct38xx_port_data *const data = dev->data;
	uint8_t alert_pins, mask;
	int ret;

	do {
	k_sem_take(&data->lock, K_FOREVER);
	ret = nct38xx_reg_read_byte(config->nct38xx_dev,
	NCT38XX_REG_GPIO_ALERT_STAT(config->gpio_port),
	&alert_pins);
	if (ret < 0) {
	k_sem_give(&data->lock);
	return ret;
	}

	ret = nct38xx_reg_read_byte(config->nct38xx_dev,
	NCT38XX_REG_GPIO_ALERT_MASK(config->gpio_port), &mask);
	if (ret < 0) {
	k_sem_give(&data->lock);
	return ret;
	}
	alert_pins &= mask;
	if (alert_pins) {
	ret = nct38xx_reg_write_byte(config->nct38xx_dev,
	NCT38XX_REG_GPIO_ALERT_STAT(config->gpio_port),
	alert_pins);
	if (ret < 0) {
	k_sem_give(&data->lock);
	return ret;
	}
	}
	k_sem_give(&data->lock);

	gpio_fire_callbacks(&data->cb_list_gpio, dev, alert_pins);

	/*
	* Vendor defined alert is generated if at least one STATn bit
	* changes from 0 to 1. We should guarantee the STATn bit is
	* clear to 0 before leaving isr.
	*/
	} while (alert_pins);

	return 0;
	}

	static const struct gpio_driver_api gpio_nct38xx_driver = {
	.pin_configure = gpio_nct38xx_pin_config,
	.port_get_raw = gpio_nct38xx_port_get_raw,
	.port_set_masked_raw = gpio_nct38xx_port_set_masked_raw,
	.port_set_bits_raw = gpio_nct38xx_port_set_bits_raw,
	.port_clear_bits_raw = gpio_nct38xx_port_clear_bits_raw,
	.port_toggle_bits = gpio_nct38xx_port_toggle_bits,
	.pin_interrupt_configure = gpio_nct38xx_pin_interrupt_configure,
	.manage_callback = gpio_nct38xx_manage_callback,
	};

	static int gpio_nct38xx_port_init(const struct device *dev)
	{
	const struct gpio_nct38xx_port_config *const config = dev->config;
	struct gpio_nct38xx_port_data *const data = dev->data;

	if (!device_is_ready(config->nct38xx_dev)) {
	LOG_ERR("%s is not ready", config->nct38xx_dev->name);
	return -ENODEV;
	}

	k_sem_init(&data->lock, 1, 1);

	return 0;
	}

	/* NCT38XX GPIO port driver must be initialized after NCT38XX GPIO driver */
	BUILD_ASSERT(CONFIG_GPIO_NCT38XX_PORT_INIT_PRIORITY > CONFIG_GPIO_NCT38XX_INIT_PRIORITY);

	#define GPIO_NCT38XX_PORT_DEVICE_INSTANCE(inst) \
	static const struct gpio_nct38xx_port_config gpio_nct38xx_port_cfg_##inst = { \
	.common = { .port_pin_mask = GPIO_PORT_PIN_MASK_FROM_DT_INST(inst) & \
	DT_INST_PROP(inst, pin_mask) }, \
	.nct38xx_dev = DEVICE_DT_GET(DT_INST_PARENT(inst)), \
	.gpio_port = DT_INST_REG_ADDR(inst), \
	.pinmux_mask = COND_CODE_1(DT_INST_NODE_HAS_PROP(inst, pinmux_mask), \
	(DT_INST_PROP(inst, pinmux_mask)), (0)), \
	}; \
	BUILD_ASSERT(!(DT_INST_REG_ADDR(inst) == 0 && \
	!(DT_INST_NODE_HAS_PROP(inst, pinmux_mask))), \
	"Port 0 should assign pinmux_mask property."); \
	static struct gpio_nct38xx_port_data gpio_nct38xx_port_data_##inst; \
	DEVICE_DT_INST_DEFINE(inst, gpio_nct38xx_port_init, NULL, &gpio_nct38xx_port_data_##inst, \
	&gpio_nct38xx_port_cfg_##inst, POST_KERNEL, \
	CONFIG_GPIO_NCT38XX_PORT_INIT_PRIORITY, &gpio_nct38xx_driver);

	DT_INST_FOREACH_STATUS_OKAY(GPIO_NCT38XX_PORT_DEVICE_INSTANCE)