| /* |
| * Copyright (c) 2017 Intel Corporation |
| * Copyright (c) 2020 Lingao Meng |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr.h> |
| #include <errno.h> |
| #include <sys/atomic.h> |
| #include <sys/util.h> |
| #include <sys/byteorder.h> |
| |
| #include <net/buf.h> |
| #include <bluetooth/bluetooth.h> |
| #include <bluetooth/conn.h> |
| #include <bluetooth/mesh.h> |
| #include <bluetooth/uuid.h> |
| |
| #define BT_DBG_ENABLED IS_ENABLED(CONFIG_BT_MESH_DEBUG_PROV) |
| #define LOG_MODULE_NAME bt_mesh_prov |
| #include "common/log.h" |
| |
| #include "host/ecc.h" |
| #include "host/testing.h" |
| |
| #include "crypto.h" |
| #include "mesh.h" |
| #include "net.h" |
| #include "access.h" |
| #include "foundation.h" |
| #include "prov.h" |
| |
| struct bt_mesh_prov_link bt_mesh_prov_link; |
| const struct bt_mesh_prov *bt_mesh_prov; |
| |
| /* Verify specification defined length: */ |
| BUILD_ASSERT(sizeof(bt_mesh_prov_link.conf_inputs) == 145, |
| "Confirmation inputs shall be 145 bytes"); |
| |
| static void pub_key_ready(const uint8_t *pkey) |
| { |
| if (!pkey) { |
| BT_WARN("Public key not available"); |
| return; |
| } |
| |
| BT_DBG("Local public key ready"); |
| } |
| |
| int bt_mesh_prov_reset_state(void (*func)(const uint8_t key[BT_PUB_KEY_LEN])) |
| { |
| int err; |
| static struct bt_pub_key_cb pub_key_cb; |
| const size_t offset = offsetof(struct bt_mesh_prov_link, auth); |
| |
| pub_key_cb.func = func ? func : pub_key_ready; |
| |
| /* Disable Attention Timer if it was set */ |
| if (bt_mesh_prov_link.conf_inputs.invite[0]) { |
| bt_mesh_attention(NULL, 0); |
| } |
| |
| atomic_clear(bt_mesh_prov_link.flags); |
| (void)memset((uint8_t *)&bt_mesh_prov_link + offset, 0, |
| sizeof(bt_mesh_prov_link) - offset); |
| |
| err = bt_pub_key_gen(&pub_key_cb); |
| if (err) { |
| BT_ERR("Failed to generate public key (%d)", err); |
| return err; |
| } |
| return 0; |
| } |
| |
| static bt_mesh_output_action_t output_action(uint8_t action) |
| { |
| switch (action) { |
| case OUTPUT_OOB_BLINK: |
| return BT_MESH_BLINK; |
| case OUTPUT_OOB_BEEP: |
| return BT_MESH_BEEP; |
| case OUTPUT_OOB_VIBRATE: |
| return BT_MESH_VIBRATE; |
| case OUTPUT_OOB_NUMBER: |
| return BT_MESH_DISPLAY_NUMBER; |
| case OUTPUT_OOB_STRING: |
| return BT_MESH_DISPLAY_STRING; |
| default: |
| return BT_MESH_NO_OUTPUT; |
| } |
| } |
| |
| static bt_mesh_input_action_t input_action(uint8_t action) |
| { |
| switch (action) { |
| case INPUT_OOB_PUSH: |
| return BT_MESH_PUSH; |
| case INPUT_OOB_TWIST: |
| return BT_MESH_TWIST; |
| case INPUT_OOB_NUMBER: |
| return BT_MESH_ENTER_NUMBER; |
| case INPUT_OOB_STRING: |
| return BT_MESH_ENTER_STRING; |
| default: |
| return BT_MESH_NO_INPUT; |
| } |
| } |
| |
| static int check_output_auth(bt_mesh_output_action_t output, uint8_t size) |
| { |
| if (!output) { |
| return -EINVAL; |
| } |
| |
| if (!(bt_mesh_prov->output_actions & output)) { |
| return -EINVAL; |
| } |
| |
| if (size > bt_mesh_prov->output_size) { |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int check_input_auth(bt_mesh_input_action_t input, uint8_t size) |
| { |
| if (!input) { |
| return -EINVAL; |
| } |
| |
| if (!(bt_mesh_prov->input_actions & input)) { |
| return -EINVAL; |
| } |
| |
| if (size > bt_mesh_prov->input_size) { |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void get_auth_string(char *str, uint8_t size) |
| { |
| uint64_t value; |
| |
| bt_rand(&value, sizeof(value)); |
| |
| static const char characters[36] = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ"; |
| |
| for (int i = 0; i < size; i++) { |
| /* pull base-36 digits: */ |
| int idx = value % 36; |
| |
| value = value / 36; |
| str[i] = characters[idx]; |
| } |
| |
| str[size] = '\0'; |
| |
| memcpy(bt_mesh_prov_link.auth, str, size); |
| memset(bt_mesh_prov_link.auth + size, 0, |
| sizeof(bt_mesh_prov_link.auth) - size); |
| } |
| |
| static uint32_t get_auth_number(bt_mesh_output_action_t output, |
| bt_mesh_input_action_t input, uint8_t size) |
| { |
| const uint32_t divider[PROV_IO_OOB_SIZE_MAX] = { 10, 100, 1000, 10000, |
| 100000, 1000000, 10000000, 100000000 }; |
| uint32_t num = 0; |
| |
| bt_rand(&num, sizeof(num)); |
| |
| if (output == BT_MESH_BLINK || |
| output == BT_MESH_BEEP || |
| output == BT_MESH_VIBRATE || |
| input == BT_MESH_PUSH || |
| input == BT_MESH_TWIST) { |
| /* According to the Bluetooth Mesh Profile |
| * Specification Section 5.4.2.4, blink, beep |
| * vibrate, push and twist should be a random integer |
| * between 0 and 10^size, *exclusive*: |
| */ |
| num = (num % (divider[size - 1] - 1)) + 1; |
| } else { |
| num %= divider[size - 1]; |
| } |
| |
| sys_put_be32(num, &bt_mesh_prov_link.auth[12]); |
| memset(bt_mesh_prov_link.auth, 0, 12); |
| |
| return num; |
| } |
| |
| int bt_mesh_prov_auth(bool is_provisioner, uint8_t method, uint8_t action, uint8_t size) |
| { |
| bt_mesh_output_action_t output; |
| bt_mesh_input_action_t input; |
| int err; |
| |
| switch (method) { |
| case AUTH_METHOD_NO_OOB: |
| if (action || size) { |
| return -EINVAL; |
| } |
| |
| (void)memset(bt_mesh_prov_link.auth, 0, sizeof(bt_mesh_prov_link.auth)); |
| return 0; |
| case AUTH_METHOD_STATIC: |
| if (action || size) { |
| return -EINVAL; |
| } |
| |
| atomic_set_bit(bt_mesh_prov_link.flags, OOB_STATIC_KEY); |
| |
| return 0; |
| |
| case AUTH_METHOD_OUTPUT: |
| output = output_action(action); |
| |
| if (is_provisioner) { |
| if (output == BT_MESH_DISPLAY_STRING) { |
| input = BT_MESH_ENTER_STRING; |
| atomic_set_bit(bt_mesh_prov_link.flags, WAIT_STRING); |
| } else { |
| input = BT_MESH_ENTER_NUMBER; |
| atomic_set_bit(bt_mesh_prov_link.flags, WAIT_NUMBER); |
| } |
| |
| return bt_mesh_prov->input(input, size); |
| } |
| |
| err = check_output_auth(output, size); |
| if (err) { |
| return err; |
| } |
| |
| if (output == BT_MESH_DISPLAY_STRING) { |
| char str[9]; |
| |
| atomic_set_bit(bt_mesh_prov_link.flags, NOTIFY_INPUT_COMPLETE); |
| get_auth_string(str, size); |
| return bt_mesh_prov->output_string(str); |
| } |
| |
| atomic_set_bit(bt_mesh_prov_link.flags, NOTIFY_INPUT_COMPLETE); |
| return bt_mesh_prov->output_number(output, |
| get_auth_number(output, BT_MESH_NO_INPUT, size)); |
| |
| case AUTH_METHOD_INPUT: |
| input = input_action(action); |
| |
| if (!is_provisioner) { |
| err = check_input_auth(input, size); |
| if (err) { |
| return err; |
| } |
| |
| if (input == BT_MESH_ENTER_STRING) { |
| atomic_set_bit(bt_mesh_prov_link.flags, WAIT_STRING); |
| } else { |
| atomic_set_bit(bt_mesh_prov_link.flags, WAIT_NUMBER); |
| } |
| |
| return bt_mesh_prov->input(input, size); |
| } |
| |
| if (input == BT_MESH_ENTER_STRING) { |
| char str[9]; |
| |
| atomic_set_bit(bt_mesh_prov_link.flags, NOTIFY_INPUT_COMPLETE); |
| get_auth_string(str, size); |
| return bt_mesh_prov->output_string(str); |
| } |
| |
| atomic_set_bit(bt_mesh_prov_link.flags, NOTIFY_INPUT_COMPLETE); |
| output = BT_MESH_DISPLAY_NUMBER; |
| return bt_mesh_prov->output_number(output, |
| get_auth_number(BT_MESH_NO_OUTPUT, input, size)); |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| int bt_mesh_input_number(uint32_t num) |
| { |
| BT_DBG("%u", num); |
| |
| if (!atomic_test_and_clear_bit(bt_mesh_prov_link.flags, WAIT_NUMBER)) { |
| return -EINVAL; |
| } |
| |
| sys_put_be32(num, &bt_mesh_prov_link.auth[12]); |
| |
| bt_mesh_prov_link.role->input_complete(); |
| |
| return 0; |
| } |
| |
| int bt_mesh_input_string(const char *str) |
| { |
| BT_DBG("%s", log_strdup(str)); |
| |
| if (strlen(str) > PROV_IO_OOB_SIZE_MAX || |
| strlen(str) > bt_mesh_prov_link.oob_size) { |
| return -ENOTSUP; |
| } |
| |
| if (!atomic_test_and_clear_bit(bt_mesh_prov_link.flags, WAIT_STRING)) { |
| return -EINVAL; |
| } |
| |
| strcpy((char *)bt_mesh_prov_link.auth, str); |
| |
| bt_mesh_prov_link.role->input_complete(); |
| |
| return 0; |
| } |
| |
| const struct bt_mesh_prov *bt_mesh_prov_get(void) |
| { |
| return bt_mesh_prov; |
| } |
| |
| bool bt_mesh_prov_active(void) |
| { |
| return atomic_test_bit(bt_mesh_prov_link.flags, LINK_ACTIVE); |
| } |
| |
| static void prov_recv(const struct prov_bearer *bearer, void *cb_data, |
| struct net_buf_simple *buf) |
| { |
| static const uint8_t op_len[10] = { |
| [PROV_INVITE] = PDU_LEN_INVITE, |
| [PROV_CAPABILITIES] = PDU_LEN_CAPABILITIES, |
| [PROV_START] = PDU_LEN_START, |
| [PROV_PUB_KEY] = PDU_LEN_PUB_KEY, |
| [PROV_INPUT_COMPLETE] = PDU_LEN_INPUT_COMPLETE, |
| [PROV_CONFIRM] = PDU_LEN_CONFIRM, |
| [PROV_RANDOM] = PDU_LEN_RANDOM, |
| [PROV_DATA] = PDU_LEN_DATA, |
| [PROV_COMPLETE] = PDU_LEN_COMPLETE, |
| [PROV_FAILED] = PDU_LEN_FAILED, |
| }; |
| |
| uint8_t type = buf->data[0]; |
| |
| BT_DBG("type 0x%02x len %u", type, buf->len); |
| |
| if (type >= ARRAY_SIZE(bt_mesh_prov_link.role->op)) { |
| BT_ERR("Unknown provisioning PDU type 0x%02x", type); |
| bt_mesh_prov_link.role->error(PROV_ERR_NVAL_PDU); |
| return; |
| } |
| |
| if ((type != PROV_FAILED && type != bt_mesh_prov_link.expect) || |
| !bt_mesh_prov_link.role->op[type]) { |
| BT_WARN("Unexpected msg 0x%02x != 0x%02x", type, bt_mesh_prov_link.expect); |
| bt_mesh_prov_link.role->error(PROV_ERR_UNEXP_PDU); |
| return; |
| } |
| |
| if (1 + op_len[type] != buf->len) { |
| BT_ERR("Invalid length %u for type 0x%02x", buf->len, type); |
| bt_mesh_prov_link.role->error(PROV_ERR_NVAL_FMT); |
| return; |
| } |
| |
| bt_mesh_prov_link.role->op[type](&buf->data[1]); |
| } |
| |
| static void prov_link_opened(const struct prov_bearer *bearer, void *cb_data) |
| { |
| atomic_set_bit(bt_mesh_prov_link.flags, LINK_ACTIVE); |
| |
| if (bt_mesh_prov->link_open) { |
| bt_mesh_prov->link_open(bearer->type); |
| } |
| |
| bt_mesh_prov_link.bearer = bearer; |
| |
| if (bt_mesh_prov_link.role->link_opened) { |
| bt_mesh_prov_link.role->link_opened(); |
| } |
| } |
| |
| static void prov_link_closed(const struct prov_bearer *bearer, void *cb_data, |
| enum prov_bearer_link_status reason) |
| { |
| BT_DBG("%u", reason); |
| |
| if (bt_mesh_prov_link.role->link_closed) { |
| bt_mesh_prov_link.role->link_closed(); |
| } |
| |
| if (bt_mesh_prov->link_close) { |
| bt_mesh_prov->link_close(bearer->type); |
| } |
| } |
| |
| static void prov_bearer_error(const struct prov_bearer *bearer, void *cb_data, |
| uint8_t err) |
| { |
| if (bt_mesh_prov_link.role->error) { |
| bt_mesh_prov_link.role->error(err); |
| } |
| } |
| |
| static const struct prov_bearer_cb prov_bearer_cb = { |
| .link_opened = prov_link_opened, |
| .link_closed = prov_link_closed, |
| .error = prov_bearer_error, |
| .recv = prov_recv, |
| }; |
| |
| const struct prov_bearer_cb *bt_mesh_prov_bearer_cb_get(void) |
| { |
| return &prov_bearer_cb; |
| } |
| |
| void bt_mesh_prov_complete(uint16_t net_idx, uint16_t addr) |
| { |
| if (bt_mesh_prov->complete) { |
| bt_mesh_prov->complete(net_idx, addr); |
| } |
| } |
| |
| void bt_mesh_prov_reset(void) |
| { |
| if (IS_ENABLED(CONFIG_BT_MESH_PB_ADV)) { |
| pb_adv_reset(); |
| } |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_PB_GATT)) { |
| pb_gatt_reset(); |
| } |
| |
| bt_mesh_prov_reset_state(NULL); |
| |
| if (bt_mesh_prov->reset) { |
| bt_mesh_prov->reset(); |
| } |
| } |
| |
| int bt_mesh_prov_init(const struct bt_mesh_prov *prov_info) |
| { |
| if (!prov_info) { |
| BT_ERR("No provisioning context provided"); |
| return -EINVAL; |
| } |
| |
| bt_mesh_prov = prov_info; |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_PB_ADV)) { |
| pb_adv_init(); |
| } |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_PB_GATT)) { |
| pb_gatt_init(); |
| } |
| |
| return bt_mesh_prov_reset_state(NULL); |
| } |