| .. _ppp: |
| |
| Point-to-Point Protocol (PPP) Support |
| ##################################### |
| |
| .. contents:: |
| :local: |
| :depth: 2 |
| |
| Overview |
| ******** |
| |
| `Point-to-Point Protocol |
| <https://en.wikipedia.org/wiki/Point-to-Point_Protocol>`_ (PPP) is a data link |
| layer (layer 2) communications protocol used to establish a direct connection |
| between two nodes. PPP is used over many types of serial links since IP packets |
| cannot be transmitted over a modem line on their own, without some data link |
| protocol. |
| |
| In Zephyr, each individual PPP link is modelled as a network interface. This |
| is similar to how Linux implements PPP. |
| |
| PPP support must be enabled at compile time by setting option |
| :kconfig:`CONFIG_NET_PPP` and :kconfig:`CONFIG_NET_L2_PPP`. |
| The PPP support in Zephyr 2.0 is still experimental and the implementation |
| supports only these protocols: |
| |
| * LCP (Link Control Protocol, |
| `RFC1661 <https://tools.ietf.org/html/rfc1661>`__) |
| * HDLC (High-level data link control, |
| `RFC1662 <https://tools.ietf.org/html/rfc1662>`__) |
| * IPCP (IP Control Protocol, |
| `RFC1332 <https://tools.ietf.org/html/rfc1332>`__) |
| * IPV6CP (IPv6 Control Protocol, |
| `RFC5072 <https://tools.ietf.org/html/rfc5072>`__) |
| |
| See also the :zephyr_file:`samples/net/sockets/echo_server/overlay-ppp.conf` |
| file for configuration option examples. |
| For using PPP with GSM modem, see :ref:`gsm_modem` for additional information. |
| |
| Testing |
| ******* |
| |
| See the `net-tools README`_ file for more details on how to test the Zephyr PPP |
| against pppd running in Linux. |
| |
| .. _net-tools README: |
| https://github.com/zephyrproject-rtos/net-tools/blob/master/README.md#ppp-connectivity |
