| .. zephyr:board:: xiao_esp32c3 |
| |
| Overview |
| ******** |
| |
| Seeed Studio XIAO ESP32-C3 is an IoT mini development board based on the |
| Espressif ESP32-C3 WiFi/Bluetooth dual-mode chip. |
| |
| For more details see the `Seeed Studio XIAO ESP32C3`_ wiki page. |
| |
| Hardware |
| ******** |
| |
| This board is based on the ESP32-C3 with 4MB of flash, WiFi and BLE support. It |
| has an USB-C port for programming and debugging, integrated battery charging |
| and an U.FL external antenna connector. It is based on a standard XIAO 14 pin |
| pinout. |
| |
| .. include:: ../../../espressif/common/soc-esp32c3-features.rst |
| :start-after: espressif-soc-esp32c3-features |
| |
| Supported Features |
| ================== |
| |
| .. zephyr:board-supported-hw:: |
| |
| Connections and IOs |
| =================== |
| |
| The board uses a standard XIAO pinout, the default pin mapping is the following: |
| |
| .. figure:: img/xiao_esp32c3_pinout.jpg |
| :align: center |
| :alt: XIAO ESP32C3 Pinout |
| |
| XIAO ESP32C3 Pinout |
| |
| System Requirements |
| ******************* |
| |
| .. include:: ../../../espressif/common/system-requirements.rst |
| :start-after: espressif-system-requirements |
| |
| Programming and Debugging |
| ************************* |
| |
| .. zephyr:board-supported-runners:: |
| |
| .. include:: ../../../espressif/common/building-flashing.rst |
| :start-after: espressif-building-flashing |
| |
| .. include:: ../../../espressif/common/board-variants.rst |
| :start-after: espressif-board-variants |
| |
| Debugging |
| ========= |
| |
| .. include:: ../../../espressif/common/openocd-debugging.rst |
| :start-after: espressif-openocd-debugging |
| |
| References |
| ********** |
| |
| .. target-notes:: |
| |
| .. _`Seeed Studio XIAO ESP32C3`: https://wiki.seeedstudio.com/XIAO_ESP32C3_Getting_Started |
