| /* |
| * Copyright (c) 2019 Vestas Wind Systems A/S |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /** |
| * @file |
| * @brief GPIO driver for the LMP90xxx AFE. |
| */ |
| |
| #define DT_DRV_COMPAT ti_lmp90xxx_gpio |
| |
| #include <zephyr/drivers/gpio.h> |
| #include <zephyr/zephyr.h> |
| |
| #define LOG_LEVEL CONFIG_GPIO_LOG_LEVEL |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_REGISTER(gpio_lmp90xxx); |
| |
| #include <zephyr/drivers/adc/lmp90xxx.h> |
| |
| #include "gpio_utils.h" |
| |
| struct gpio_lmp90xxx_config { |
| /* gpio_driver_config needs to be first */ |
| struct gpio_driver_config common; |
| const struct device *parent; |
| }; |
| |
| struct gpio_lmp90xxx_data { |
| /* gpio_driver_data needs to be first */ |
| struct gpio_driver_data common; |
| }; |
| |
| static int gpio_lmp90xxx_config(const struct device *dev, |
| gpio_pin_t pin, gpio_flags_t flags) |
| { |
| const struct gpio_lmp90xxx_config *config = dev->config; |
| int err = 0; |
| |
| if (pin > LMP90XXX_GPIO_MAX) { |
| return -EINVAL; |
| } |
| |
| if ((flags & GPIO_SINGLE_ENDED) != 0) { |
| return -ENOTSUP; |
| } |
| |
| if ((flags & (GPIO_PULL_UP | GPIO_PULL_DOWN)) != 0) { |
| return -ENOTSUP; |
| } |
| |
| if (flags & GPIO_INT_ENABLE) { |
| /* LMP90xxx GPIOs do not support interrupts */ |
| return -ENOTSUP; |
| } |
| |
| switch (flags & GPIO_DIR_MASK) { |
| case GPIO_INPUT: |
| err = lmp90xxx_gpio_set_input(config->parent, pin); |
| break; |
| case GPIO_OUTPUT: |
| if ((flags & GPIO_OUTPUT_INIT_HIGH) != 0) { |
| err = lmp90xxx_gpio_set_pin_value(config->parent, pin, |
| true); |
| } else if ((flags & GPIO_OUTPUT_INIT_LOW) != 0) { |
| err = lmp90xxx_gpio_set_pin_value(config->parent, pin, |
| false); |
| } |
| |
| if (err) { |
| return err; |
| } |
| err = lmp90xxx_gpio_set_output(config->parent, pin); |
| break; |
| default: |
| return -ENOTSUP; |
| } |
| |
| return err; |
| } |
| |
| static int gpio_lmp90xxx_port_get_raw(const struct device *dev, |
| gpio_port_value_t *value) |
| { |
| const struct gpio_lmp90xxx_config *config = dev->config; |
| |
| return lmp90xxx_gpio_port_get_raw(config->parent, value); |
| } |
| |
| static int gpio_lmp90xxx_port_set_masked_raw(const struct device *dev, |
| gpio_port_pins_t mask, |
| gpio_port_value_t value) |
| { |
| const struct gpio_lmp90xxx_config *config = dev->config; |
| |
| return lmp90xxx_gpio_port_set_masked_raw(config->parent, mask, value); |
| } |
| |
| static int gpio_lmp90xxx_port_set_bits_raw(const struct device *dev, |
| gpio_port_pins_t pins) |
| { |
| const struct gpio_lmp90xxx_config *config = dev->config; |
| |
| return lmp90xxx_gpio_port_set_bits_raw(config->parent, pins); |
| } |
| |
| static int gpio_lmp90xxx_port_clear_bits_raw(const struct device *dev, |
| gpio_port_pins_t pins) |
| { |
| const struct gpio_lmp90xxx_config *config = dev->config; |
| |
| return lmp90xxx_gpio_port_clear_bits_raw(config->parent, pins); |
| } |
| |
| static int gpio_lmp90xxx_port_toggle_bits(const struct device *dev, |
| gpio_port_pins_t pins) |
| { |
| const struct gpio_lmp90xxx_config *config = dev->config; |
| |
| return lmp90xxx_gpio_port_toggle_bits(config->parent, pins); |
| } |
| |
| static int gpio_lmp90xxx_pin_interrupt_configure(const struct device *dev, |
| gpio_pin_t pin, |
| enum gpio_int_mode mode, |
| enum gpio_int_trig trig) |
| { |
| ARG_UNUSED(dev); |
| ARG_UNUSED(pin); |
| ARG_UNUSED(mode); |
| ARG_UNUSED(trig); |
| |
| return -ENOTSUP; |
| } |
| |
| static int gpio_lmp90xxx_init(const struct device *dev) |
| { |
| const struct gpio_lmp90xxx_config *config = dev->config; |
| |
| if (!device_is_ready(config->parent)) { |
| LOG_ERR("parent LMP90xxx device '%s' not ready", |
| config->parent->name); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static const struct gpio_driver_api gpio_lmp90xxx_api = { |
| .pin_configure = gpio_lmp90xxx_config, |
| .port_set_masked_raw = gpio_lmp90xxx_port_set_masked_raw, |
| .port_set_bits_raw = gpio_lmp90xxx_port_set_bits_raw, |
| .port_clear_bits_raw = gpio_lmp90xxx_port_clear_bits_raw, |
| .port_toggle_bits = gpio_lmp90xxx_port_toggle_bits, |
| .pin_interrupt_configure = gpio_lmp90xxx_pin_interrupt_configure, |
| .port_get_raw = gpio_lmp90xxx_port_get_raw, |
| }; |
| |
| BUILD_ASSERT(CONFIG_GPIO_LMP90XXX_INIT_PRIORITY > |
| CONFIG_ADC_INIT_PRIORITY, |
| "LMP90xxx GPIO driver must be initialized after LMP90xxx ADC " |
| "driver"); |
| |
| #define GPIO_LMP90XXX_DEVICE(id) \ |
| static const struct gpio_lmp90xxx_config gpio_lmp90xxx_##id##_cfg = {\ |
| .common = { \ |
| .port_pin_mask = \ |
| GPIO_PORT_PIN_MASK_FROM_DT_INST(id) \ |
| }, \ |
| .parent = DEVICE_DT_GET(DT_INST_BUS(id)), \ |
| }; \ |
| \ |
| static struct gpio_lmp90xxx_data gpio_lmp90xxx_##id##_data; \ |
| \ |
| DEVICE_DT_INST_DEFINE(id, \ |
| &gpio_lmp90xxx_init, \ |
| NULL, \ |
| &gpio_lmp90xxx_##id##_data, \ |
| &gpio_lmp90xxx_##id##_cfg, POST_KERNEL, \ |
| CONFIG_GPIO_LMP90XXX_INIT_PRIORITY, \ |
| &gpio_lmp90xxx_api); |
| |
| DT_INST_FOREACH_STATUS_OKAY(GPIO_LMP90XXX_DEVICE) |