| CONFIG_NETWORKING=y |
| CONFIG_NET_UDP=y |
| CONFIG_NET_TCP=y |
| CONFIG_NET_IPV6=y |
| CONFIG_NET_IPV4=y |
| #CONFIG_NET_DHCPV4=y |
| |
| CONFIG_NET_L2_ETHERNET=y |
| CONFIG_NET_L2_VIRTUAL=y |
| CONFIG_NET_L2_VIRTUAL_MGMT=y |
| CONFIG_NET_L2_IPIP=y |
| |
| CONFIG_NET_MGMT=y |
| CONFIG_NET_MGMT_EVENT=y |
| |
| CONFIG_ENTROPY_GENERATOR=y |
| CONFIG_TEST_RANDOM_GENERATOR=y |
| CONFIG_INIT_STACKS=y |
| |
| CONFIG_NET_LOG=y |
| CONFIG_LOG=y |
| |
| CONFIG_NET_STATISTICS=y |
| |
| CONFIG_NET_PKT_RX_COUNT=32 |
| CONFIG_NET_PKT_TX_COUNT=32 |
| CONFIG_NET_BUF_RX_COUNT=32 |
| CONFIG_NET_BUF_TX_COUNT=32 |
| |
| CONFIG_NET_IF_MAX_IPV6_COUNT=5 |
| CONFIG_NET_IF_MAX_IPV4_COUNT=5 |
| CONFIG_NET_IF_UNICAST_IPV6_ADDR_COUNT=3 |
| CONFIG_NET_IF_MCAST_IPV6_ADDR_COUNT=4 |
| CONFIG_NET_MAX_CONTEXTS=10 |
| |
| CONFIG_NET_SHELL=y |
| |
| CONFIG_NET_CONFIG_SETTINGS=y |
| |
| # The application will set things up itself so the config module should |
| # not try to set things up. |
| CONFIG_NET_CONFIG_AUTO_INIT=n |
| |
| # First ethernet interface will use these settings. |
| CONFIG_NET_CONFIG_MY_IPV6_ADDR="2001:db8::1" |
| CONFIG_NET_CONFIG_MY_IPV4_ADDR="192.0.2.1" |
| CONFIG_NET_CONFIG_MY_IPV4_NETMASK="255.255.255.0" |
| |
| # The peer values are used as a tunnel remote address. |
| CONFIG_NET_CONFIG_PEER_IPV6_ADDR="2001:db8::2" |
| CONFIG_NET_CONFIG_PEER_IPV4_ADDR="192.0.2.2" |
| |
| # First tunneling interface will have these settings |
| CONFIG_NET_SAMPLE_IFACE2_MY_IPV6_ADDR="2001:db8:100::1" |
| # TEST-NET-2 from RFC 5737 |
| CONFIG_NET_SAMPLE_IFACE2_MY_IPV4_ADDR="198.51.100.1" |
| CONFIG_NET_SAMPLE_IFACE2_MY_IPV4_NETMASK="255.255.255.0" |
| |
| # Second tunneling interface |
| CONFIG_NET_SAMPLE_IFACE3_MY_IPV6_ADDR="2001:db8:200::1" |
| # TEST-NET-3 from RFC 5737 |
| CONFIG_NET_SAMPLE_IFACE3_MY_IPV4_ADDR="203.0.113.1" |
| CONFIG_NET_SAMPLE_IFACE3_MY_IPV4_NETMASK="255.255.255.0" |
