| /** @file |
| * @brief Bluetooth Mesh Profile APIs. |
| */ |
| |
| /* |
| * Copyright (c) 2017 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| #ifndef __BT_MESH_MAIN_H |
| #define __BT_MESH_MAIN_H |
| |
| /** |
| * @brief Bluetooth Mesh Provisioning |
| * @defgroup bt_mesh_prov Bluetooth Mesh Provisioning |
| * @ingroup bt_mesh |
| * @{ |
| */ |
| |
| typedef enum { |
| BT_MESH_NO_OUTPUT = 0, |
| BT_MESH_BLINK = BIT(0), |
| BT_MESH_BEEP = BIT(1), |
| BT_MESH_VIBRATE = BIT(2), |
| BT_MESH_DISPLAY_NUMBER = BIT(3), |
| BT_MESH_DISPLAY_STRING = BIT(4), |
| } bt_mesh_output_action; |
| |
| typedef enum { |
| BT_MESH_NO_INPUT = 0, |
| BT_MESH_PUSH = BIT(0), |
| BT_MESH_TWIST = BIT(1), |
| BT_MESH_ENTER_NUMBER = BIT(2), |
| BT_MESH_ENTER_STRING = BIT(3), |
| } bt_mesh_input_action; |
| |
| struct bt_mesh_prov { |
| const u8_t *uuid; |
| |
| const u8_t *static_val; |
| u8_t static_val_len; |
| |
| u8_t output_size; |
| u16_t output_actions; |
| |
| u8_t input_size; |
| u16_t input_actions; |
| |
| int (*output_number)(bt_mesh_output_action act, u32_t num); |
| int (*output_string)(const char *str); |
| |
| int (*input)(bt_mesh_input_action act, u8_t size); |
| |
| void (*link_open)(void); |
| void (*link_close)(void); |
| void (*complete)(u16_t addr); |
| }; |
| |
| int bt_mesh_input_string(const char *str); |
| int bt_mesh_input_number(u32_t num); |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @brief Bluetooth Mesh |
| * @defgroup bt_mesh Bluetooth Mesh |
| * @ingroup bluetooth |
| * @{ |
| */ |
| |
| /* Primary Network Key index */ |
| #define BT_MESH_NET_PRIMARY 0x000 |
| |
| #define BT_MESH_RELAY_DISABLED 0x00 |
| #define BT_MESH_RELAY_ENABLED 0x01 |
| #define BT_MESH_RELAY_NOT_SUPPORTED 0x02 |
| |
| #define BT_MESH_BEACON_DISABLED 0x00 |
| #define BT_MESH_BEACON_ENABLED 0x01 |
| |
| #define BT_MESH_GATT_PROXY_DISABLED 0x00 |
| #define BT_MESH_GATT_PROXY_ENABLED 0x01 |
| #define BT_MESH_GATT_PROXY_NOT_SUPPORTED 0x02 |
| |
| #define BT_MESH_FRIEND_DISABLED 0x00 |
| #define BT_MESH_FRIEND_ENABLED 0x01 |
| #define BT_MESH_FRIEND_NOT_SUPPORTED 0x02 |
| |
| #define BT_MESH_NODE_IDENTITY_STOPPED 0x00 |
| #define BT_MESH_NODE_IDENTITY_RUNNING 0x01 |
| #define BT_MESH_NODE_IDENTITY_NOT_SUPPORTED 0x02 |
| |
| /* Features */ |
| #define BT_MESH_FEAT_RELAY BIT(0) |
| #define BT_MESH_FEAT_PROXY BIT(1) |
| #define BT_MESH_FEAT_FRIEND BIT(2) |
| #define BT_MESH_FEAT_LOW_POWER BIT(3) |
| |
| /** @brief Initialize Mesh support |
| * |
| * @param prov Node provisioning information. |
| * @param comp Node Composition. |
| * |
| * @return Zero on success or (negative) error code otherwise. |
| */ |
| int bt_mesh_init(const struct bt_mesh_prov *prov, |
| const struct bt_mesh_comp *comp); |
| |
| /** @brief Reset the state of the local Mesh node. |
| * |
| * Resets the state of the node, which in turn causes it to start sending |
| * out unprovisioned beacons. |
| */ |
| void bt_mesh_reset(void); |
| |
| /** @brief Provision the local Mesh Node. |
| * |
| * This API should normally not be used directly by the application. The |
| * only exception is for testing purposes where manual provisioning is |
| * desired without an actual external provisioner. |
| * |
| * @param net_key Network Key |
| * @param net_idx Network Key Index |
| * @param flags Provisioning Flags |
| * @param iv_index IV Index |
| * @param seq Sequence Number (0 if newly provisioned). |
| * @param addr Primary element address |
| * @param dev_key Device Key |
| * |
| * @return Zero on success or (negative) error code otherwise. |
| */ |
| int bt_mesh_provision(const u8_t net_key[16], u16_t net_idx, |
| u8_t flags, u32_t iv_index, u32_t seq, |
| u16_t addr, const u8_t dev_key[16]); |
| |
| /** @brief Toggle the Low Power feature of the local device |
| * |
| * Enables or disables the Low Power feature of the local device. This is |
| * exposed as a run-time feature, since the device might want to change |
| * this e.g. based on being plugged into a stable power source or running |
| * from a battery power source. |
| * |
| * @param enable true to enable LPN functionality, false to disable it. |
| * |
| * @return Zero on success or (negative) error code otherwise. |
| */ |
| int bt_mesh_lpn_set(bool enable); |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* __BT_MESH_MAIN_H */ |