drivers/ethernet/eth_w5500.c - third_party/github/zephyrproject-rtos/zephyr - Git at Google

 /* W5500 Stand-alone Ethernet Controller with SPI
  *
  * Copyright (c) 2020 Linumiz
  * Author: Parthiban Nallathambi <parthiban@linumiz.com>
  *
  * SPDX-License-Identifier: Apache-2.0
  */

 #define DT_DRV_COMPAT	wiznet_w5500

 #include <zephyr/logging/log.h>
 LOG_MODULE_REGISTER(eth_w5500, CONFIG_ETHERNET_LOG_LEVEL);

 #include <zephyr/zephyr.h>
 #include <zephyr/device.h>
 #include <string.h>
 #include <errno.h>
 #include <zephyr/drivers/gpio.h>
 #include <zephyr/drivers/spi.h>
 #include <zephyr/net/net_pkt.h>
 #include <zephyr/net/net_if.h>
 #include <zephyr/net/ethernet.h>
 #include <ethernet/eth_stats.h>

 #include "eth.h"
 #include "eth_w5500_priv.h"

 #define WIZNET_OUI_B0	0x00
 #define WIZNET_OUI_B1	0x08
 #define WIZNET_OUI_B2	0xdc

 #define W5500_SPI_BLOCK_SELECT(addr)	(((addr) >> 16) & 0x1f)
 #define W5500_SPI_READ_CONTROL(addr)	(W5500_SPI_BLOCK_SELECT(addr) << 3)
 #define W5500_SPI_WRITE_CONTROL(addr)   \
 	((W5500_SPI_BLOCK_SELECT(addr) << 3) | BIT(2))

 static int w5500_spi_read(const struct device *dev, uint32_t addr,
 			  uint8_t *data, uint32_t len)
 {
 	const struct w5500_config *cfg = dev->config;
 	int ret;
 	/* 3 bytes as 0x010203 during command phase */
 	uint8_t tmp[len + 3];

 	uint8_t cmd[3] = {
 		addr >> 8,
 		addr,
 		W5500_SPI_READ_CONTROL(addr)
 	};
 	const struct spi_buf tx_buf = {
 		.buf = cmd,
 		.len = ARRAY_SIZE(cmd),
 	};
 	const struct spi_buf_set tx = {
 		.buffers = &tx_buf,
 		.count = 1,
 	};
 	const struct spi_buf rx_buf = {
 		.buf = tmp,
 		.len = ARRAY_SIZE(tmp),
 	};
 	const struct spi_buf_set rx = {
 		.buffers = &rx_buf,
 		.count = 1,
 	};

 	ret = spi_transceive_dt(&cfg->spi, &tx, &rx);

 	if (!ret) {
 		/* skip the default dummy 0x010203 */
 		memcpy(data, &tmp[3], len);
 	}

 	return ret;
 }

 static int w5500_spi_write(const struct device *dev, uint32_t addr,
 			   uint8_t *data, uint32_t len)
 {
 	const struct w5500_config *cfg = dev->config;
 	int ret;
 	uint8_t cmd[3] = {
 		addr >> 8,
 		addr,
 		W5500_SPI_WRITE_CONTROL(addr),
 	};
 	const struct spi_buf tx_buf[2] = {
 		{
 			.buf = cmd,
 			.len = ARRAY_SIZE(cmd),
 		},
 		{
 			.buf = data,
 			.len = len,
 		},
 	};
 	const struct spi_buf_set tx = {
 		.buffers = tx_buf,
 		.count = ARRAY_SIZE(tx_buf),
 	};

 	ret = spi_write_dt(&cfg->spi, &tx);

 	return ret;
 }

 static int w5500_readbuf(const struct device *dev, uint16_t offset, uint8_t *buf,
 			 int len)
 {
 	uint32_t addr;
 	int remain = 0;
 	int ret;
 	const uint32_t mem_start = W5500_Sn_RX_MEM_START;
 	const uint16_t mem_size = W5500_RX_MEM_SIZE;

 	offset %= mem_size;
 	addr = mem_start + offset;

 	if (offset + len > mem_size) {
 		remain = (offset + len) % mem_size;
 		len = mem_size - offset;
 	}

 	ret = w5500_spi_read(dev, addr, buf, len);
 	if (ret || !remain) {
 		return ret;
 	}

 	return w5500_spi_read(dev, mem_start, buf + len, remain);
 }

 static int w5500_writebuf(const struct device *dev, uint16_t offset, uint8_t *buf,
 			  int len)
 {
 	uint32_t addr;
 	int ret = 0;
 	int remain = 0;
 	const uint32_t mem_start = W5500_Sn_TX_MEM_START;
 	const uint32_t mem_size = W5500_TX_MEM_SIZE;

 	offset %= mem_size;
 	addr = mem_start + offset;

 	if (offset + len > mem_size) {
 		remain = (offset + len) % mem_size;
 		len = mem_size - offset;
 	}

 	ret = w5500_spi_write(dev, addr, buf, len);
 	if (ret || !remain) {
 		return ret;
 	}

 	return w5500_spi_write(dev, mem_start, buf + len, remain);
 }

 static int w5500_command(const struct device *dev, uint8_t cmd)
 {
 	uint8_t reg;
 	uint64_t end = sys_clock_timeout_end_calc(K_MSEC(100));

 	w5500_spi_write(dev, W5500_S0_CR, &cmd, 1);
 	while (1) {
 		w5500_spi_read(dev, W5500_S0_CR, &reg, 1);
 		if (!reg) {
 			break;
 			}
 		int64_t remaining = end - sys_clock_tick_get();
 		if (remaining <= 0) {
 			return -EIO;
 			}
 		k_busy_wait(W5500_PHY_ACCESS_DELAY);
 		}
 	return 0;
 }

 static int w5500_tx(const struct device *dev, struct net_pkt *pkt)
 {
 	struct w5500_runtime *ctx = dev->data;
 	uint16_t len = net_pkt_get_len(pkt);
 	uint16_t offset;
 	uint8_t off[2];
 	int ret;

 	w5500_spi_read(dev, W5500_S0_TX_WR, off, 2);
 	offset = sys_get_be16(off);

 	if (net_pkt_read(pkt, ctx->buf, len)) {
 		return -EIO;
 	}

 	ret = w5500_writebuf(dev, offset, ctx->buf, len);
 	if (ret < 0) {
 		return ret;
 	}

 	sys_put_be16(offset + len, off);
 	w5500_spi_write(dev, W5500_S0_TX_WR, off, 2);

 	w5500_command(dev, S0_CR_SEND);
 	if (k_sem_take(&ctx->tx_sem, K_MSEC(10))) {
 		return -EIO;
 	}

 	return 0;
 }

 static void w5500_rx(const struct device *dev)
 {
 	uint8_t header[2];
 	uint8_t tmp[2];
 	uint16_t off;
 	uint16_t rx_len;
 	uint16_t rx_buf_len;
 	uint16_t read_len;
 	uint16_t reader;
 	struct net_buf *pkt_buf = NULL;
 	struct net_pkt *pkt;
 	struct w5500_runtime *ctx = dev->data;
 	const struct w5500_config *config = dev->config;

 	w5500_spi_read(dev, W5500_S0_RX_RSR, tmp, 2);
 	rx_buf_len = sys_get_be16(tmp);

 	if (rx_buf_len == 0) {
 		return;
 	}

 	w5500_spi_read(dev, W5500_S0_RX_RD, tmp, 2);
 	off = sys_get_be16(tmp);

 	w5500_readbuf(dev, off, header, 2);
 	rx_len = sys_get_be16(header) - 2;

 	pkt = net_pkt_rx_alloc_with_buffer(ctx->iface, rx_len,
 			AF_UNSPEC, 0, K_MSEC(config->timeout));
 	if (!pkt) {
 		eth_stats_update_errors_rx(ctx->iface);
 		return;
 	}

 	pkt_buf = pkt->buffer;

 	read_len = rx_len;
 	reader = off + 2;

 	do {
 		size_t frag_len;
 		uint8_t *data_ptr;
 		size_t frame_len;

 		data_ptr = pkt_buf->data;

 		frag_len = net_buf_tailroom(pkt_buf);

 		if (read_len > frag_len) {
 			frame_len = frag_len;
 		} else {
 			frame_len = read_len;
 		}

 		w5500_readbuf(dev, reader, data_ptr, frame_len);
 		net_buf_add(pkt_buf, frame_len);
 		reader += frame_len;

 		read_len -= frame_len;
 		pkt_buf = pkt_buf->frags;
 	} while (read_len > 0);

 	if (net_recv_data(ctx->iface, pkt) < 0) {
 		net_pkt_unref(pkt);
 	}

 	sys_put_be16(off + 2 + rx_len, tmp);
 	w5500_spi_write(dev, W5500_S0_RX_RD, tmp, 2);
 	w5500_command(dev, S0_CR_RECV);
 }

 static void w5500_thread(const struct device *dev)
 {
 	uint8_t ir;
 	struct w5500_runtime *ctx = dev->data;
 	const struct w5500_config *config = dev->config;

 	while (true) {
 		k_sem_take(&ctx->int_sem, K_FOREVER);

 		while (gpio_pin_get_dt(&(config->interrupt))) {
 			/* Read interrupt */
 			w5500_spi_read(dev, W5500_S0_IR, &ir, 1);

 			if (ir) {
 				/* Clear interrupt */
 				w5500_spi_write(dev, W5500_S0_IR, &ir, 1);

 				LOG_DBG("IR received");

 				if (ir & S0_IR_SENDOK) {
 					k_sem_give(&ctx->tx_sem);
 					LOG_DBG("TX Done");
 				}

 				if (ir & S0_IR_RECV) {
 					w5500_rx(dev);
 					LOG_DBG("RX Done");
 				}
 			}
 		}
 	}
 }

 static void w5500_iface_init(struct net_if *iface)
 {
 	const struct device *dev = net_if_get_device(iface);
 	struct w5500_runtime *ctx = dev->data;

 	net_if_set_link_addr(iface, ctx->mac_addr,
 			     sizeof(ctx->mac_addr),
 			     NET_LINK_ETHERNET);

 	if (!ctx->iface) {
 		ctx->iface = iface;
 	}

 	ethernet_init(iface);
 }

 static enum ethernet_hw_caps w5500_get_capabilities(const struct device *dev)
 {
 	ARG_UNUSED(dev);

 	return ETHERNET_LINK_10BASE_T | ETHERNET_LINK_100BASE_T
 #if defined(CONFIG_NET_PROMISCUOUS_MODE)
 		| ETHERNET_PROMISC_MODE
 #endif
 	;
 }

 static int w5500_set_config(const struct device *dev,
 			    enum ethernet_config_type type,
 			    const struct ethernet_config *config)
 {
 	uint8_t mode;
 	uint8_t mr = W5500_S0_MR_MF;

 	w5500_spi_read(dev, W5500_S0_MR, &mode, 1);
 	if (IS_ENABLED(CONFIG_NET_PROMISCUOUS_MODE) &&
 	    type == ETHERNET_CONFIG_TYPE_PROMISC_MODE) {
 		if (config->promisc_mode) {
 			if (!(mode & BIT(mr)))
 				return -EALREADY;
 			}

 			/* clear */
 			WRITE_BIT(mode, mr, 0);
 	} else {
 		if (mode & BIT(mr)) {
 			return -EALREADY;
 		}

 		/* set */
 		WRITE_BIT(mode, mr, 1);
 	}

 	return w5500_spi_write(dev, W5500_S0_MR, &mode, 1);
 }

 static int w5500_hw_start(const struct device *dev)
 {
 	uint8_t mode = S0_MR_MACRAW;
 	uint8_t mask = IR_S0;

 	w5500_spi_write(dev, W5500_S0_MR, &mode, 1);
 	w5500_command(dev, S0_CR_OPEN);

 	/* enable interrupt */
 	w5500_spi_write(dev, W5500_SIMR, &mask, 1);

 	return 0;
 }

 static int w5500_hw_stop(const struct device *dev)
 {
 	uint8_t mask = 0;

 	/* disable interrupt */
 	w5500_spi_write(dev, W5500_SIMR, &mask, 1);
 	w5500_command(dev, S0_CR_CLOSE);

 	return 0;
 }

 static struct ethernet_api w5500_api_funcs = {
 	.iface_api.init = w5500_iface_init,
 	.get_capabilities = w5500_get_capabilities,
 	.set_config = w5500_set_config,
 	.start = w5500_hw_start,
 	.stop = w5500_hw_stop,
 	.send = w5500_tx,
 };

 static int w5500_hw_reset(const struct device *dev)
 {
 	int ret;
 	uint8_t mask = 0;
 	uint8_t tmp = MR_RST;

 	ret = w5500_spi_write(dev, W5500_MR, &tmp, 1);
 	if (ret < 0) {
 		return ret;
 	}

 	k_msleep(5);
 	tmp = MR_PB;
 	w5500_spi_write(dev, W5500_MR, &tmp, 1);

 	/* disable interrupt */
 	return w5500_spi_write(dev, W5500_SIMR, &mask, 1);
 }

 static void w5500_gpio_callback(const struct device *dev,
 				struct gpio_callback *cb,
 				uint32_t pins)
 {
 	struct w5500_runtime *ctx =
 		CONTAINER_OF(cb, struct w5500_runtime, gpio_cb);

 	k_sem_give(&ctx->int_sem);
 }

 static void w5500_set_macaddr(const struct device *dev)
 {
 	struct w5500_runtime *ctx = dev->data;

 	/* override vendor bytes */
 	memset(ctx->mac_addr, '\0', sizeof(ctx->mac_addr));
 	ctx->mac_addr[0] = WIZNET_OUI_B0;
 	ctx->mac_addr[1] = WIZNET_OUI_B1;
 	ctx->mac_addr[2] = WIZNET_OUI_B2;
 	if (ctx->generate_mac) {
 		ctx->generate_mac(ctx->mac_addr);
 	}

 	w5500_spi_write(dev, W5500_SHAR, ctx->mac_addr, sizeof(ctx->mac_addr));
 }

 static void w5500_memory_configure(const struct device *dev)
 {
 	int i;
 	uint8_t mem = 0x10;

 	/* Configure RX & TX memory to 16K */
 	w5500_spi_write(dev, W5500_Sn_RXMEM_SIZE(0), &mem, 1);
 	w5500_spi_write(dev, W5500_Sn_TXMEM_SIZE(0), &mem, 1);

 	mem = 0;
 	for (i = 1; i < 8; i++) {
 		w5500_spi_write(dev, W5500_Sn_RXMEM_SIZE(i), &mem, 1);
 		w5500_spi_write(dev, W5500_Sn_TXMEM_SIZE(i), &mem, 1);
 	}
 }

 static void w5500_random_mac(uint8_t *mac_addr)
 {
 	gen_random_mac(mac_addr, WIZNET_OUI_B0, WIZNET_OUI_B1, WIZNET_OUI_B2);
 }

 static int w5500_init(const struct device *dev)
 {
 	int err;
 	uint8_t rtr[2];
 	const struct w5500_config *config = dev->config;
 	struct w5500_runtime *ctx = dev->data;

 	if (!spi_is_ready(&config->spi)) {
 		LOG_ERR("SPI master port %s not ready", config->spi.bus->name);
 		return -EINVAL;
 	}

 	if (!device_is_ready(config->interrupt.port)) {
 		LOG_ERR("GPIO port %s not ready", config->interrupt.port->name);
 		return -EINVAL;
 	}

 	if (gpio_pin_configure_dt(&config->interrupt, GPIO_INPUT)) {
 		LOG_ERR("Unable to configure GPIO pin %u", config->interrupt.pin);
 		return -EINVAL;
 	}

 	gpio_init_callback(&(ctx->gpio_cb), w5500_gpio_callback,
 			   BIT(config->interrupt.pin));

 	if (gpio_add_callback(config->interrupt.port, &(ctx->gpio_cb))) {
 		return -EINVAL;
 	}

 	gpio_pin_interrupt_configure_dt(&config->interrupt,
 					GPIO_INT_EDGE_FALLING);

 	if (config->reset.port) {
 		if (!device_is_ready(config->reset.port)) {
 			LOG_ERR("GPIO port %s not ready", config->reset.port->name);
 			return -EINVAL;
 		}
 		if (gpio_pin_configure_dt(&config->reset, GPIO_OUTPUT)) {
 			LOG_ERR("Unable to configure GPIO pin %u", config->reset.pin);
 			return -EINVAL;
 		}
 		gpio_pin_set_dt(&config->reset, 0);
 		k_usleep(500);
 		gpio_pin_set_dt(&config->reset, 1);
 	}

 	err = w5500_hw_reset(dev);
 	if (err) {
 		LOG_ERR("Reset failed");
 		return err;
 	}

 	w5500_set_macaddr(dev);
 	w5500_memory_configure(dev);

 	/* check retry time value */
 	w5500_spi_read(dev, W5500_RTR, rtr, 2);
 	if (sys_get_be16(rtr) != RTR_DEFAULT) {
 		LOG_ERR("Unable to read RTR register");
 		return -ENODEV;
 	}

 	k_thread_create(&ctx->thread, ctx->thread_stack,
 			CONFIG_ETH_W5500_RX_THREAD_STACK_SIZE,
 			(k_thread_entry_t)w5500_thread,
 			(void *)dev, NULL, NULL,
 			K_PRIO_COOP(CONFIG_ETH_W5500_RX_THREAD_PRIO),
 			0, K_NO_WAIT);

 	LOG_INF("W5500 Initialized");

 	return 0;
 }

 static struct w5500_runtime w5500_0_runtime = {
 	.generate_mac = w5500_random_mac,
 	.tx_sem = Z_SEM_INITIALIZER(w5500_0_runtime.tx_sem,
 					1,  UINT_MAX),
 	.int_sem  = Z_SEM_INITIALIZER(w5500_0_runtime.int_sem,
 				      0, UINT_MAX),
 };

 static const struct w5500_config w5500_0_config = {
 	.spi = SPI_DT_SPEC_INST_GET(0, SPI_WORD_SET(8), 0),
 	.interrupt = GPIO_DT_SPEC_INST_GET(0, int_gpios),
 	.reset = GPIO_DT_SPEC_INST_GET_OR(0, reset_gpios, { 0 }),
 	.timeout = CONFIG_ETH_W5500_TIMEOUT,
 };

 ETH_NET_DEVICE_DT_INST_DEFINE(0,
 		    w5500_init, NULL,
 		    &w5500_0_runtime, &w5500_0_config,
 		    CONFIG_ETH_INIT_PRIORITY, &w5500_api_funcs, NET_ETH_MTU);
	/* W5500 Stand-alone Ethernet Controller with SPI
	*
	* Copyright (c) 2020 Linumiz
	* Author: Parthiban Nallathambi <parthiban@linumiz.com>
	*
	* SPDX-License-Identifier: Apache-2.0
	*/

	#define DT_DRV_COMPAT wiznet_w5500

	#include <zephyr/logging/log.h>
	LOG_MODULE_REGISTER(eth_w5500, CONFIG_ETHERNET_LOG_LEVEL);

	#include <zephyr/zephyr.h>
	#include <zephyr/device.h>
	#include <string.h>
	#include <errno.h>
	#include <zephyr/drivers/gpio.h>
	#include <zephyr/drivers/spi.h>
	#include <zephyr/net/net_pkt.h>
	#include <zephyr/net/net_if.h>
	#include <zephyr/net/ethernet.h>
	#include <ethernet/eth_stats.h>

	#include "eth.h"
	#include "eth_w5500_priv.h"

	#define WIZNET_OUI_B0 0x00
	#define WIZNET_OUI_B1 0x08
	#define WIZNET_OUI_B2 0xdc

	#define W5500_SPI_BLOCK_SELECT(addr) (((addr) >> 16) & 0x1f)
	#define W5500_SPI_READ_CONTROL(addr) (W5500_SPI_BLOCK_SELECT(addr) << 3)
	#define W5500_SPI_WRITE_CONTROL(addr) \
	((W5500_SPI_BLOCK_SELECT(addr) << 3) \| BIT(2))

	static int w5500_spi_read(const struct device *dev, uint32_t addr,
	uint8_t *data, uint32_t len)
	{
	const struct w5500_config *cfg = dev->config;
	int ret;
	/* 3 bytes as 0x010203 during command phase */
	uint8_t tmp[len + 3];

	uint8_t cmd[3] = {
	addr >> 8,
	addr,
	W5500_SPI_READ_CONTROL(addr)
	};
	const struct spi_buf tx_buf = {
	.buf = cmd,
	.len = ARRAY_SIZE(cmd),
	};
	const struct spi_buf_set tx = {
	.buffers = &tx_buf,
	.count = 1,
	};
	const struct spi_buf rx_buf = {
	.buf = tmp,
	.len = ARRAY_SIZE(tmp),
	};
	const struct spi_buf_set rx = {
	.buffers = &rx_buf,
	.count = 1,
	};

	ret = spi_transceive_dt(&cfg->spi, &tx, &rx);

	if (!ret) {
	/* skip the default dummy 0x010203 */
	memcpy(data, &tmp[3], len);
	}

	return ret;
	}

	static int w5500_spi_write(const struct device *dev, uint32_t addr,
	uint8_t *data, uint32_t len)
	{
	const struct w5500_config *cfg = dev->config;
	int ret;
	uint8_t cmd[3] = {
	addr >> 8,
	addr,
	W5500_SPI_WRITE_CONTROL(addr),
	};
	const struct spi_buf tx_buf[2] = {
	{
	.buf = cmd,
	.len = ARRAY_SIZE(cmd),
	},
	{
	.buf = data,
	.len = len,
	},
	};
	const struct spi_buf_set tx = {
	.buffers = tx_buf,
	.count = ARRAY_SIZE(tx_buf),
	};

	ret = spi_write_dt(&cfg->spi, &tx);

	return ret;
	}

	static int w5500_readbuf(const struct device dev, uint16_t offset, uint8_t buf,
	int len)
	{
	uint32_t addr;
	int remain = 0;
	int ret;
	const uint32_t mem_start = W5500_Sn_RX_MEM_START;
	const uint16_t mem_size = W5500_RX_MEM_SIZE;

	offset %= mem_size;
	addr = mem_start + offset;

	if (offset + len > mem_size) {
	remain = (offset + len) % mem_size;
	len = mem_size - offset;
	}

	ret = w5500_spi_read(dev, addr, buf, len);
	if (ret \|\| !remain) {
	return ret;
	}

	return w5500_spi_read(dev, mem_start, buf + len, remain);
	}

	static int w5500_writebuf(const struct device dev, uint16_t offset, uint8_t buf,
	int len)
	{
	uint32_t addr;
	int ret = 0;
	int remain = 0;
	const uint32_t mem_start = W5500_Sn_TX_MEM_START;
	const uint32_t mem_size = W5500_TX_MEM_SIZE;

	offset %= mem_size;
	addr = mem_start + offset;

	if (offset + len > mem_size) {
	remain = (offset + len) % mem_size;
	len = mem_size - offset;
	}

	ret = w5500_spi_write(dev, addr, buf, len);
	if (ret \|\| !remain) {
	return ret;
	}

	return w5500_spi_write(dev, mem_start, buf + len, remain);
	}

	static int w5500_command(const struct device *dev, uint8_t cmd)
	{
	uint8_t reg;
	uint64_t end = sys_clock_timeout_end_calc(K_MSEC(100));

	w5500_spi_write(dev, W5500_S0_CR, &cmd, 1);
	while (1) {
	w5500_spi_read(dev, W5500_S0_CR, &reg, 1);
	if (!reg) {
	break;
	}
	int64_t remaining = end - sys_clock_tick_get();
	if (remaining <= 0) {
	return -EIO;
	}
	k_busy_wait(W5500_PHY_ACCESS_DELAY);
	}
	return 0;
	}

	static int w5500_tx(const struct device dev, struct net_pkt pkt)
	{
	struct w5500_runtime *ctx = dev->data;
	uint16_t len = net_pkt_get_len(pkt);
	uint16_t offset;
	uint8_t off[2];
	int ret;

	w5500_spi_read(dev, W5500_S0_TX_WR, off, 2);
	offset = sys_get_be16(off);

	if (net_pkt_read(pkt, ctx->buf, len)) {
	return -EIO;
	}

	ret = w5500_writebuf(dev, offset, ctx->buf, len);
	if (ret < 0) {
	return ret;
	}

	sys_put_be16(offset + len, off);
	w5500_spi_write(dev, W5500_S0_TX_WR, off, 2);

	w5500_command(dev, S0_CR_SEND);
	if (k_sem_take(&ctx->tx_sem, K_MSEC(10))) {
	return -EIO;
	}

	return 0;
	}

	static void w5500_rx(const struct device *dev)
	{
	uint8_t header[2];
	uint8_t tmp[2];
	uint16_t off;
	uint16_t rx_len;
	uint16_t rx_buf_len;
	uint16_t read_len;
	uint16_t reader;
	struct net_buf *pkt_buf = NULL;
	struct net_pkt *pkt;
	struct w5500_runtime *ctx = dev->data;
	const struct w5500_config *config = dev->config;

	w5500_spi_read(dev, W5500_S0_RX_RSR, tmp, 2);
	rx_buf_len = sys_get_be16(tmp);

	if (rx_buf_len == 0) {
	return;
	}

	w5500_spi_read(dev, W5500_S0_RX_RD, tmp, 2);
	off = sys_get_be16(tmp);

	w5500_readbuf(dev, off, header, 2);
	rx_len = sys_get_be16(header) - 2;

	pkt = net_pkt_rx_alloc_with_buffer(ctx->iface, rx_len,
	AF_UNSPEC, 0, K_MSEC(config->timeout));
	if (!pkt) {
	eth_stats_update_errors_rx(ctx->iface);
	return;
	}

	pkt_buf = pkt->buffer;

	read_len = rx_len;
	reader = off + 2;

	do {
	size_t frag_len;
	uint8_t *data_ptr;
	size_t frame_len;

	data_ptr = pkt_buf->data;

	frag_len = net_buf_tailroom(pkt_buf);

	if (read_len > frag_len) {
	frame_len = frag_len;
	} else {
	frame_len = read_len;
	}

	w5500_readbuf(dev, reader, data_ptr, frame_len);
	net_buf_add(pkt_buf, frame_len);
	reader += frame_len;

	read_len -= frame_len;
	pkt_buf = pkt_buf->frags;
	} while (read_len > 0);

	if (net_recv_data(ctx->iface, pkt) < 0) {
	net_pkt_unref(pkt);
	}

	sys_put_be16(off + 2 + rx_len, tmp);
	w5500_spi_write(dev, W5500_S0_RX_RD, tmp, 2);
	w5500_command(dev, S0_CR_RECV);
	}

	static void w5500_thread(const struct device *dev)
	{
	uint8_t ir;
	struct w5500_runtime *ctx = dev->data;
	const struct w5500_config *config = dev->config;

	while (true) {
	k_sem_take(&ctx->int_sem, K_FOREVER);

	while (gpio_pin_get_dt(&(config->interrupt))) {
	/* Read interrupt */
	w5500_spi_read(dev, W5500_S0_IR, &ir, 1);

	if (ir) {
	/* Clear interrupt */
	w5500_spi_write(dev, W5500_S0_IR, &ir, 1);

	LOG_DBG("IR received");

	if (ir & S0_IR_SENDOK) {
	k_sem_give(&ctx->tx_sem);
	LOG_DBG("TX Done");
	}

	if (ir & S0_IR_RECV) {
	w5500_rx(dev);
	LOG_DBG("RX Done");
	}
	}
	}
	}
	}

	static void w5500_iface_init(struct net_if *iface)
	{
	const struct device *dev = net_if_get_device(iface);
	struct w5500_runtime *ctx = dev->data;

	net_if_set_link_addr(iface, ctx->mac_addr,
	sizeof(ctx->mac_addr),
	NET_LINK_ETHERNET);

	if (!ctx->iface) {
	ctx->iface = iface;
	}

	ethernet_init(iface);
	}

	static enum ethernet_hw_caps w5500_get_capabilities(const struct device *dev)
	{
	ARG_UNUSED(dev);

	return ETHERNET_LINK_10BASE_T \| ETHERNET_LINK_100BASE_T
	#if defined(CONFIG_NET_PROMISCUOUS_MODE)
	\| ETHERNET_PROMISC_MODE
	#endif
	;
	}

	static int w5500_set_config(const struct device *dev,
	enum ethernet_config_type type,
	const struct ethernet_config *config)
	{
	uint8_t mode;
	uint8_t mr = W5500_S0_MR_MF;

	w5500_spi_read(dev, W5500_S0_MR, &mode, 1);
	if (IS_ENABLED(CONFIG_NET_PROMISCUOUS_MODE) &&
	type == ETHERNET_CONFIG_TYPE_PROMISC_MODE) {
	if (config->promisc_mode) {
	if (!(mode & BIT(mr)))
	return -EALREADY;
	}

	/* clear */
	WRITE_BIT(mode, mr, 0);
	} else {
	if (mode & BIT(mr)) {
	return -EALREADY;
	}

	/* set */
	WRITE_BIT(mode, mr, 1);
	}

	return w5500_spi_write(dev, W5500_S0_MR, &mode, 1);
	}

	static int w5500_hw_start(const struct device *dev)
	{
	uint8_t mode = S0_MR_MACRAW;
	uint8_t mask = IR_S0;

	w5500_spi_write(dev, W5500_S0_MR, &mode, 1);
	w5500_command(dev, S0_CR_OPEN);

	/* enable interrupt */
	w5500_spi_write(dev, W5500_SIMR, &mask, 1);

	return 0;
	}

	static int w5500_hw_stop(const struct device *dev)
	{
	uint8_t mask = 0;

	/* disable interrupt */
	w5500_spi_write(dev, W5500_SIMR, &mask, 1);
	w5500_command(dev, S0_CR_CLOSE);

	return 0;
	}

	static struct ethernet_api w5500_api_funcs = {
	.iface_api.init = w5500_iface_init,
	.get_capabilities = w5500_get_capabilities,
	.set_config = w5500_set_config,
	.start = w5500_hw_start,
	.stop = w5500_hw_stop,
	.send = w5500_tx,
	};

	static int w5500_hw_reset(const struct device *dev)
	{
	int ret;
	uint8_t mask = 0;
	uint8_t tmp = MR_RST;

	ret = w5500_spi_write(dev, W5500_MR, &tmp, 1);
	if (ret < 0) {
	return ret;
	}

	k_msleep(5);
	tmp = MR_PB;
	w5500_spi_write(dev, W5500_MR, &tmp, 1);

	/* disable interrupt */
	return w5500_spi_write(dev, W5500_SIMR, &mask, 1);
	}

	static void w5500_gpio_callback(const struct device *dev,
	struct gpio_callback *cb,
	uint32_t pins)
	{
	struct w5500_runtime *ctx =
	CONTAINER_OF(cb, struct w5500_runtime, gpio_cb);

	k_sem_give(&ctx->int_sem);
	}

	static void w5500_set_macaddr(const struct device *dev)
	{
	struct w5500_runtime *ctx = dev->data;

	/* override vendor bytes */
	memset(ctx->mac_addr, '\0', sizeof(ctx->mac_addr));
	ctx->mac_addr[0] = WIZNET_OUI_B0;
	ctx->mac_addr[1] = WIZNET_OUI_B1;
	ctx->mac_addr[2] = WIZNET_OUI_B2;
	if (ctx->generate_mac) {
	ctx->generate_mac(ctx->mac_addr);
	}

	w5500_spi_write(dev, W5500_SHAR, ctx->mac_addr, sizeof(ctx->mac_addr));
	}

	static void w5500_memory_configure(const struct device *dev)
	{
	int i;
	uint8_t mem = 0x10;

	/* Configure RX & TX memory to 16K */
	w5500_spi_write(dev, W5500_Sn_RXMEM_SIZE(0), &mem, 1);
	w5500_spi_write(dev, W5500_Sn_TXMEM_SIZE(0), &mem, 1);

	mem = 0;
	for (i = 1; i < 8; i++) {
	w5500_spi_write(dev, W5500_Sn_RXMEM_SIZE(i), &mem, 1);
	w5500_spi_write(dev, W5500_Sn_TXMEM_SIZE(i), &mem, 1);
	}
	}

	static void w5500_random_mac(uint8_t *mac_addr)
	{
	gen_random_mac(mac_addr, WIZNET_OUI_B0, WIZNET_OUI_B1, WIZNET_OUI_B2);
	}

	static int w5500_init(const struct device *dev)
	{
	int err;
	uint8_t rtr[2];
	const struct w5500_config *config = dev->config;
	struct w5500_runtime *ctx = dev->data;

	if (!spi_is_ready(&config->spi)) {
	LOG_ERR("SPI master port %s not ready", config->spi.bus->name);
	return -EINVAL;
	}

	if (!device_is_ready(config->interrupt.port)) {
	LOG_ERR("GPIO port %s not ready", config->interrupt.port->name);
	return -EINVAL;
	}

	if (gpio_pin_configure_dt(&config->interrupt, GPIO_INPUT)) {
	LOG_ERR("Unable to configure GPIO pin %u", config->interrupt.pin);
	return -EINVAL;
	}

	gpio_init_callback(&(ctx->gpio_cb), w5500_gpio_callback,
	BIT(config->interrupt.pin));

	if (gpio_add_callback(config->interrupt.port, &(ctx->gpio_cb))) {
	return -EINVAL;
	}

	gpio_pin_interrupt_configure_dt(&config->interrupt,
	GPIO_INT_EDGE_FALLING);

	if (config->reset.port) {
	if (!device_is_ready(config->reset.port)) {
	LOG_ERR("GPIO port %s not ready", config->reset.port->name);
	return -EINVAL;
	}
	if (gpio_pin_configure_dt(&config->reset, GPIO_OUTPUT)) {
	LOG_ERR("Unable to configure GPIO pin %u", config->reset.pin);
	return -EINVAL;
	}
	gpio_pin_set_dt(&config->reset, 0);
	k_usleep(500);
	gpio_pin_set_dt(&config->reset, 1);
	}

	err = w5500_hw_reset(dev);
	if (err) {
	LOG_ERR("Reset failed");
	return err;
	}

	w5500_set_macaddr(dev);
	w5500_memory_configure(dev);

	/* check retry time value */
	w5500_spi_read(dev, W5500_RTR, rtr, 2);
	if (sys_get_be16(rtr) != RTR_DEFAULT) {
	LOG_ERR("Unable to read RTR register");
	return -ENODEV;
	}

	k_thread_create(&ctx->thread, ctx->thread_stack,
	CONFIG_ETH_W5500_RX_THREAD_STACK_SIZE,
	(k_thread_entry_t)w5500_thread,
	(void *)dev, NULL, NULL,
	K_PRIO_COOP(CONFIG_ETH_W5500_RX_THREAD_PRIO),
	0, K_NO_WAIT);

	LOG_INF("W5500 Initialized");

	return 0;
	}

	static struct w5500_runtime w5500_0_runtime = {
	.generate_mac = w5500_random_mac,
	.tx_sem = Z_SEM_INITIALIZER(w5500_0_runtime.tx_sem,
	1, UINT_MAX),
	.int_sem = Z_SEM_INITIALIZER(w5500_0_runtime.int_sem,
	0, UINT_MAX),
	};

	static const struct w5500_config w5500_0_config = {
	.spi = SPI_DT_SPEC_INST_GET(0, SPI_WORD_SET(8), 0),
	.interrupt = GPIO_DT_SPEC_INST_GET(0, int_gpios),
	.reset = GPIO_DT_SPEC_INST_GET_OR(0, reset_gpios, { 0 }),
	.timeout = CONFIG_ETH_W5500_TIMEOUT,
	};

	ETH_NET_DEVICE_DT_INST_DEFINE(0,
	w5500_init, NULL,
	&w5500_0_runtime, &w5500_0_config,
	CONFIG_ETH_INIT_PRIORITY, &w5500_api_funcs, NET_ETH_MTU);