| /* |
| * Copyright (c) 2018 blik GmbH |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <logging/sys_log.h> |
| #include <errno.h> |
| #include <device.h> |
| #include <init.h> |
| #include <kernel.h> |
| #include <rtc.h> |
| #include <power.h> |
| #include <soc.h> |
| #include <misc/util.h> |
| #include <fsl_rtc.h> |
| |
| struct mcux_rtc_config { |
| RTC_Type *base; |
| void (*irq_config_func)(struct device *dev); |
| }; |
| |
| struct mcux_rtc_data { |
| struct k_sem sync; |
| rtc_config_t config; |
| |
| /* callback information */ |
| void (*callback)(void *data); |
| void *callback_data; |
| }; |
| |
| static void mcux_rtc_enable(struct device *dev) |
| { |
| const struct mcux_rtc_config *config = dev->config->config_info; |
| |
| RTC_StartTimer(config->base); |
| RTC_EnableInterrupts(config->base, |
| kRTC_AlarmInterruptEnable | |
| kRTC_TimeOverflowInterruptEnable | |
| kRTC_TimeInvalidInterruptEnable); |
| } |
| |
| static void mcux_rtc_disable(struct device *dev) |
| { |
| const struct mcux_rtc_config *config = dev->config->config_info; |
| |
| RTC_DisableInterrupts(config->base, |
| kRTC_AlarmInterruptEnable | |
| kRTC_TimeOverflowInterruptEnable | |
| kRTC_TimeInvalidInterruptEnable); |
| RTC_StopTimer(config->base); |
| |
| /* clear out any set alarms */ |
| config->base->TAR = 0; |
| } |
| |
| static int mcux_rtc_set_alarm(struct device *dev, const u32_t alarm_val) |
| { |
| const struct mcux_rtc_config *config = dev->config->config_info; |
| |
| if (alarm_val < config->base->TSR) { |
| SYS_LOG_ERR("alarm cannot be earlier than current time\n"); |
| return -EINVAL; |
| } |
| |
| config->base->TAR = alarm_val; |
| return 0; |
| } |
| |
| static int mcux_rtc_set_config(struct device *dev, struct rtc_config *cfg) |
| { |
| const struct mcux_rtc_config *config = dev->config->config_info; |
| struct mcux_rtc_data *data = dev->driver_data; |
| int ret = 0; |
| |
| /* only allow one modifier at a time */ |
| k_sem_take(&data->sync, K_FOREVER); |
| |
| if (cfg->alarm_enable) { |
| /* set up callback information */ |
| data->callback = (void *) cfg->cb_fn; |
| data->callback_data = dev; |
| |
| RTC_StopTimer(config->base); |
| config->base->TSR = cfg->init_val; |
| RTC_StartTimer(config->base); |
| ret = mcux_rtc_set_alarm(dev, cfg->alarm_val); |
| } else { |
| /* clear any existing alarm setting */ |
| config->base->TAR = 0; |
| |
| /* clear callbacks */ |
| data->callback = NULL; |
| data->callback_data = NULL; |
| } |
| |
| k_sem_give(&data->sync); |
| |
| return ret; |
| } |
| |
| static u32_t mcux_rtc_read(struct device *dev) |
| { |
| const struct mcux_rtc_config *config = dev->config->config_info; |
| u32_t val = config->base->TSR; |
| |
| /* |
| * Read TSR seconds twice in case it glitches during an update. |
| * This can happen when a read occurs at the time the register is |
| * incrementing. |
| */ |
| if (config->base->TSR == val) { |
| return val; |
| } |
| |
| val = config->base->TSR; |
| |
| return val; |
| } |
| |
| static u32_t mcux_rtc_get_pending_int(struct device *dev) |
| { |
| const struct mcux_rtc_config *config = dev->config->config_info; |
| |
| return RTC_GetStatusFlags(config->base) & RTC_SR_TAF_MASK; |
| } |
| |
| static const struct rtc_driver_api mcux_rtc_driver_api = { |
| .enable = mcux_rtc_enable, |
| .disable = mcux_rtc_disable, |
| .read = mcux_rtc_read, |
| .set_config = mcux_rtc_set_config, |
| .set_alarm = mcux_rtc_set_alarm, |
| .get_pending_int = mcux_rtc_get_pending_int, |
| }; |
| |
| static void mcux_rtc_isr(void *arg) |
| { |
| struct device *dev = arg; |
| const struct mcux_rtc_config *config = dev->config->config_info; |
| struct mcux_rtc_data *data = dev->driver_data; |
| |
| /* perform any registered callbacks */ |
| if (data->callback) { |
| data->callback(data->callback_data); |
| } |
| |
| /* |
| * Clear any conditions to ack the IRQ |
| * |
| * callback may have already reset the alarm flag if a new |
| * alarm value was programmed to the TAR |
| */ |
| RTC_StopTimer(config->base); |
| if (RTC_GetStatusFlags(config->base) & RTC_SR_TAF_MASK) { |
| RTC_ClearStatusFlags(config->base, kRTC_AlarmFlag); |
| } else if (RTC_GetStatusFlags(config->base) & RTC_SR_TIF_MASK) { |
| RTC_ClearStatusFlags(config->base, kRTC_TimeInvalidFlag); |
| } else if (RTC_GetStatusFlags(config->base) & RTC_SR_TOF_MASK) { |
| RTC_ClearStatusFlags(config->base, kRTC_TimeOverflowFlag); |
| } |
| RTC_StartTimer(config->base); |
| } |
| |
| static int mcux_rtc_init(struct device *dev) |
| { |
| const struct mcux_rtc_config *config = dev->config->config_info; |
| struct mcux_rtc_data *data = dev->driver_data; |
| |
| k_sem_init(&data->sync, 1, UINT_MAX); |
| |
| /* Create default configuration and store it off */ |
| RTC_GetDefaultConfig(&data->config); |
| RTC_Init(config->base, &data->config); |
| |
| /* Enable 32kHz oscillator and wait for 1ms to settle */ |
| config->base->CR |= 0x100; |
| k_busy_wait(USEC_PER_MSEC); |
| |
| /* connect and enable the IRQ line */ |
| config->irq_config_func(dev); |
| return 0; |
| } |
| |
| static struct mcux_rtc_data rtc_mcux_data_0; |
| |
| static void rtc_mcux_irq_config_0(struct device *dev); |
| |
| static struct mcux_rtc_config rtc_mcux_config_0 = { |
| .base = (RTC_Type *)CONFIG_RTC_MCUX_0_BASE_ADDRESS, |
| .irq_config_func = rtc_mcux_irq_config_0, |
| }; |
| |
| DEVICE_DEFINE(rtc, CONFIG_RTC_MCUX_0_NAME, |
| &mcux_rtc_init, NULL, &rtc_mcux_data_0, &rtc_mcux_config_0, |
| POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE, |
| &mcux_rtc_driver_api); |
| |
| static void rtc_mcux_irq_config_0(struct device *dev) |
| { |
| IRQ_CONNECT(CONFIG_RTC_MCUX_0_IRQ, CONFIG_RTC_MCUX_0_IRQ_PRI, |
| mcux_rtc_isr, DEVICE_GET(rtc), 0); |
| irq_enable(CONFIG_RTC_MCUX_0_IRQ); |
| } |