| /* |
| * Copyright (c) 2024 Nordic Semiconductor ASA |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| dppic00: dppic@42000 { |
| compatible = "nordic,nrf-dppic"; |
| reg = <0x42000 0x808>; |
| status = "disabled"; |
| }; |
| |
| spi00: spi@4a000 { |
| /* |
| * This spi node can be either SPIM or SPIS, |
| * for the user to pick: |
| * compatible = "nordic,nrf-spim" or |
| * "nordic,nrf-spis". |
| */ |
| compatible = "nordic,nrf-spim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x4a000 0x1000>; |
| interrupts = <74 NRF_DEFAULT_IRQ_PRIORITY>; |
| max-frequency = <DT_FREQ_M(32)>; |
| easydma-maxcnt-bits = <16>; |
| status = "disabled"; |
| }; |
| |
| uart00: uart@4a000 { |
| compatible = "nordic,nrf-uarte"; |
| reg = <0x4a000 0x1000>; |
| interrupts = <74 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| gpio2: gpio@50400 { |
| compatible = "nordic,nrf-gpio"; |
| gpio-controller; |
| reg = <0x50400 0x300>; |
| #gpio-cells = <2>; |
| ngpios = <11>; |
| status = "disabled"; |
| port = <2>; |
| }; |
| |
| timer00: timer@55000 { |
| compatible = "nordic,nrf-timer"; |
| status = "disabled"; |
| reg = <0x55000 0x1000>; |
| cc-num = <6>; |
| max-bit-width = <32>; |
| interrupts = <85 NRF_DEFAULT_IRQ_PRIORITY>; |
| prescaler = <0>; |
| }; |
| |
| dppic10: dppic@82000 { |
| compatible = "nordic,nrf-dppic"; |
| reg = <0x82000 0x808>; |
| status = "disabled"; |
| }; |
| |
| timer10: timer@85000 { |
| compatible = "nordic,nrf-timer"; |
| status = "disabled"; |
| reg = <0x85000 0x1000>; |
| cc-num = <8>; |
| max-bit-width = <32>; |
| interrupts = <133 NRF_DEFAULT_IRQ_PRIORITY>; |
| prescaler = <0>; |
| }; |
| |
| egu10: egu@87000 { |
| compatible = "nordic,nrf-egu"; |
| reg = <0x87000 0x1000>; |
| interrupts = <135 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| radio: radio@8a000 { |
| compatible = "nordic,nrf-radio"; |
| reg = <0x8a000 0x1000>; |
| interrupts = <138 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| dfe-supported; |
| ieee802154-supported; |
| ble-2mbps-supported; |
| ble-coded-phy-supported; |
| |
| ieee802154: ieee802154 { |
| compatible = "nordic,nrf-ieee802154"; |
| status = "disabled"; |
| }; |
| }; |
| |
| dppic20: dppic@c2000 { |
| compatible = "nordic,nrf-dppic"; |
| reg = <0xc2000 0x808>; |
| status = "disabled"; |
| }; |
| |
| i2c20: i2c@c6000 { |
| compatible = "nordic,nrf-twim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xc6000 0x1000>; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| interrupts = <198 NRF_DEFAULT_IRQ_PRIORITY>; |
| easydma-maxcnt-bits = <16>; |
| status = "disabled"; |
| }; |
| |
| spi20: spi@c6000 { |
| /* |
| * This spi node can be either SPIM or SPIS, |
| * for the user to pick: |
| * compatible = "nordic,nrf-spim" or |
| * "nordic,nrf-spis". |
| */ |
| compatible = "nordic,nrf-spim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xc6000 0x1000>; |
| interrupts = <198 NRF_DEFAULT_IRQ_PRIORITY>; |
| max-frequency = <DT_FREQ_M(8)>; |
| easydma-maxcnt-bits = <16>; |
| status = "disabled"; |
| }; |
| |
| uart20: uart@c6000 { |
| compatible = "nordic,nrf-uarte"; |
| reg = <0xc6000 0x1000>; |
| interrupts = <198 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| i2c21: i2c@c7000 { |
| compatible = "nordic,nrf-twim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xc7000 0x1000>; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| interrupts = <199 NRF_DEFAULT_IRQ_PRIORITY>; |
| easydma-maxcnt-bits = <16>; |
| status = "disabled"; |
| }; |
| |
| spi21: spi@c7000 { |
| /* |
| * This spi node can be either SPIM or SPIS, |
| * for the user to pick: |
| * compatible = "nordic,nrf-spim" or |
| * "nordic,nrf-spis". |
| */ |
| compatible = "nordic,nrf-spim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xc7000 0x1000>; |
| interrupts = <199 NRF_DEFAULT_IRQ_PRIORITY>; |
| max-frequency = <DT_FREQ_M(8)>; |
| easydma-maxcnt-bits = <16>; |
| status = "disabled"; |
| }; |
| |
| uart21: uart@c7000 { |
| compatible = "nordic,nrf-uarte"; |
| reg = <0xc7000 0x1000>; |
| interrupts = <199 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| i2c22: i2c@c8000 { |
| compatible = "nordic,nrf-twim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xc8000 0x1000>; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| interrupts = <200 NRF_DEFAULT_IRQ_PRIORITY>; |
| easydma-maxcnt-bits = <16>; |
| status = "disabled"; |
| }; |
| |
| spi22: spi@c8000 { |
| /* |
| * This spi node can be either SPIM or SPIS, |
| * for the user to pick: |
| * compatible = "nordic,nrf-spim" or |
| * "nordic,nrf-spis". |
| */ |
| compatible = "nordic,nrf-spim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xc8000 0x1000>; |
| interrupts = <200 NRF_DEFAULT_IRQ_PRIORITY>; |
| max-frequency = <DT_FREQ_M(8)>; |
| easydma-maxcnt-bits = <16>; |
| status = "disabled"; |
| }; |
| |
| uart22: uart@c8000 { |
| compatible = "nordic,nrf-uarte"; |
| reg = <0xc8000 0x1000>; |
| interrupts = <200 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| egu20: egu@c9000 { |
| compatible = "nordic,nrf-egu"; |
| reg = <0xc9000 0x1000>; |
| interrupts = <201 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| timer20: timer@ca000 { |
| compatible = "nordic,nrf-timer"; |
| status = "disabled"; |
| reg = <0xca000 0x1000>; |
| cc-num = <6>; |
| max-bit-width = <32>; |
| interrupts = <202 NRF_DEFAULT_IRQ_PRIORITY>; |
| prescaler = <0>; |
| }; |
| |
| timer21: timer@cb000 { |
| compatible = "nordic,nrf-timer"; |
| status = "disabled"; |
| reg = <0xcb000 0x1000>; |
| cc-num = <6>; |
| max-bit-width = <32>; |
| interrupts = <203 NRF_DEFAULT_IRQ_PRIORITY>; |
| prescaler = <0>; |
| }; |
| |
| timer22: timer@cc000 { |
| compatible = "nordic,nrf-timer"; |
| status = "disabled"; |
| reg = <0xcc000 0x1000>; |
| cc-num = <6>; |
| max-bit-width = <32>; |
| interrupts = <204 NRF_DEFAULT_IRQ_PRIORITY>; |
| prescaler = <0>; |
| }; |
| |
| timer23: timer@cd000 { |
| compatible = "nordic,nrf-timer"; |
| status = "disabled"; |
| reg = <0xcd000 0x1000>; |
| cc-num = <6>; |
| max-bit-width = <32>; |
| interrupts = <205 NRF_DEFAULT_IRQ_PRIORITY>; |
| prescaler = <0>; |
| }; |
| |
| timer24: timer@ce000 { |
| compatible = "nordic,nrf-timer"; |
| status = "disabled"; |
| reg = <0xce000 0x1000>; |
| cc-num = <6>; |
| max-bit-width = <32>; |
| interrupts = <206 NRF_DEFAULT_IRQ_PRIORITY>; |
| prescaler = <0>; |
| }; |
| |
| adc: adc@d5000 { |
| compatible = "nordic,nrf-saadc"; |
| reg = <0xd5000 0x1000>; |
| interrupts = <213 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| #io-channel-cells = <1>; |
| }; |
| |
| nfct: nfct@d6000 { |
| compatible = "nordic,nrf-nfct"; |
| reg = <0xd6000 0x1000>; |
| interrupts = <214 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| temp: temp@d7000 { |
| compatible = "nordic,nrf-temp"; |
| reg = <0xd7000 0x1000>; |
| interrupts = <215 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| gpio1: gpio@d8200 { |
| compatible = "nordic,nrf-gpio"; |
| gpio-controller; |
| reg = <0xd8200 0x300>; |
| #gpio-cells = <2>; |
| ngpios = <16>; |
| status = "disabled"; |
| port = <1>; |
| gpiote-instance = <&gpiote20>; |
| }; |
| |
| gpiote20: gpiote@da000 { |
| compatible = "nordic,nrf-gpiote"; |
| reg = <0xda000 0x1000>; |
| interrupts = <219 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| instance = <20>; |
| }; |
| |
| i2s20: i2s@dd000 { |
| compatible = "nordic,nrf-i2s"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xdd000 0x1000>; |
| interrupts = <221 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| qdec20: qdec@e0000 { |
| compatible = "nordic,nrf-qdec"; |
| reg = <0xe0000 0x1000>; |
| interrupts = <224 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| qdec21: qdec@e1000 { |
| compatible = "nordic,nrf-qdec"; |
| reg = <0xe1000 0x1000>; |
| interrupts = <225 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| grtc: grtc@e2000 { |
| compatible = "nordic,nrf-grtc"; |
| reg = <0xe2000 0x1000>; |
| cc-num = <12>; |
| owned-channels = <0 1 2 3 4 5 6 7 8 9 10 11>; |
| interrupts = <228 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| dppic30: dppic@102000 { |
| compatible = "nordic,nrf-dppic"; |
| reg = <0x102000 0x808>; |
| status = "disabled"; |
| }; |
| |
| i2c30: i2c@104000 { |
| compatible = "nordic,nrf-twim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x104000 0x1000>; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| interrupts = <260 NRF_DEFAULT_IRQ_PRIORITY>; |
| easydma-maxcnt-bits = <16>; |
| status = "disabled"; |
| }; |
| |
| spi30: spi@104000 { |
| /* |
| * This spi node can be either SPIM or SPIS, |
| * for the user to pick: |
| * compatible = "nordic,nrf-spim" or |
| * "nordic,nrf-spis". |
| */ |
| compatible = "nordic,nrf-spim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x104000 0x1000>; |
| interrupts = <260 NRF_DEFAULT_IRQ_PRIORITY>; |
| max-frequency = <DT_FREQ_M(8)>; |
| easydma-maxcnt-bits = <16>; |
| status = "disabled"; |
| }; |
| |
| uart30: uart@104000 { |
| compatible = "nordic,nrf-uarte"; |
| reg = <0x104000 0x1000>; |
| interrupts = <260 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| wdt30: watchdog@108000 { |
| compatible = "nordic,nrf-wdt"; |
| reg = <0x108000 0x620>; |
| interrupts = <264 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| wdt31: watchdog@109000 { |
| compatible = "nordic,nrf-wdt"; |
| reg = <0x109000 0x620>; |
| interrupts = <265 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| gpio0: gpio@10a000 { |
| compatible = "nordic,nrf-gpio"; |
| gpio-controller; |
| reg = <0x10a000 0x300>; |
| #gpio-cells = <2>; |
| ngpios = <5>; |
| status = "disabled"; |
| port = <0>; |
| gpiote-instance = <&gpiote30>; |
| }; |
| |
| gpiote30: gpiote@10c000 { |
| compatible = "nordic,nrf-gpiote"; |
| reg = <0x10c000 0x1000>; |
| interrupts = <269 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| instance = <30>; |
| }; |
| |
| clock: clock@10e000 { |
| compatible = "nordic,nrf-clock"; |
| reg = <0x10e000 0x1000>; |
| interrupts = <270 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |