| # Copyright: (c) 2025, Intel Corporation |
| # Author: Arkadiusz Cholewinski <arkadiuszx.cholewinski@intel.com> |
| from dataclasses import dataclass, field |
| |
| |
| @dataclass |
| class PowerShieldConf: |
| class PowerMode: |
| """ |
| Class representing power mode |
| """ |
| |
| AUTO = "auto" # Power-on when acquisition start |
| ON = "on" # Power-on manually |
| OFF = "off" # Power-off manually |
| |
| class MeasureUnit: |
| """ |
| Class representing measure units. |
| """ |
| |
| VOLTAGE = "voltage" # Target Volatege |
| CURRENT_RMS = "current_rms" # Current RMS value |
| POWER = "power" # Total power consumption |
| RAW_DATA = "rawdata" # Get Raw Data (current probes) |
| |
| class TemperatureUnit: |
| """ |
| Class representing temperature units. |
| """ |
| |
| CELSIUS = "degc" # Celsius temperature unit |
| FAHRENHEIT = "degf" # Fahrenheit temperature unit |
| |
| class FunctionMode: |
| """ |
| Class representing functional modes of a power monitor. |
| """ |
| |
| OPTIM = "optim" # Optimized mode for lower power or efficiency |
| HIGH = "high" # High performance mode |
| |
| class DataFormat: |
| """ |
| Class representing different data formats for representation. |
| """ |
| |
| ASCII_DEC = "ascii_dec" # ASCII encoded decimal format |
| BIN_HEXA = "bin_hexa" # Binary/hexadecimal format |
| |
| class SamplingFrequency: |
| """ |
| Class representing various sampling frequencies. |
| """ |
| |
| FREQ_100K = "100k" # 100 kHz frequency |
| FREQ_50K = "50k" # 50 kHz frequency |
| FREQ_20K = "20k" # 20 kHz frequency |
| FREQ_10K = "10k" # 10 kHz frequency |
| FREQ_5K = "5k" # 5 kHz frequency |
| FREQ_2K = "2k" # 2 kHz frequency |
| FREQ_1K = "1k" # 1 kHz frequency |
| FREQ_500 = "500" # 500 Hz frequency |
| FREQ_200 = "200" # 200 Hz frequency |
| FREQ_100 = "100" # 100 Hz frequency |
| FREQ_50 = "50" # 50 Hz frequency |
| FREQ_20 = "20" # 20 Hz frequency |
| FREQ_10 = "10" # 10 Hz frequency |
| FREQ_5 = "5" # 5 Hz frequency |
| FREQ_2 = "2" # 2 Hz frequency |
| FREQ_1 = "1" # 1 Hz frequency |
| |
| output_file: str = "rawData.csv" |
| sampling_frequency: str = SamplingFrequency.FREQ_1K |
| data_format: str = DataFormat.BIN_HEXA |
| function_mode: str = FunctionMode.HIGH |
| target_voltage: str = "3300m" |
| temperature_unit: str = TemperatureUnit.CELSIUS |
| acquisition_time: str = field(default=None, init=False) |
