# Configure JTAG cable | |
# EM Starter Kit has built-in FT2232 chip, which is similar to Digilent HS-1. | |
source [find interface/ftdi/digilent-hs1.cfg] | |
# EM11D reportedly requires 5 MHz. Other cores and board can work faster. | |
adapter_khz 5000 | |
# ARCs support only JTAG. | |
transport select jtag | |
# Configure FPGA. This script supports both LX45 and LX150. | |
source [find target/snps_em_sk_fpga.cfg] |