| :orphan: |
| |
| .. _zephyr_3.2: |
| |
| Zephyr 3.2.0 (Working Draft) |
| ############################ |
| |
| The following sections provide detailed lists of changes by component. |
| |
| Security Vulnerability Related |
| ****************************** |
| |
| Known issues |
| ************ |
| |
| API Changes |
| *********** |
| |
| Changes in this release |
| ======================= |
| |
| * Zephyr now requires Python 3.8 or higher |
| |
| * Changed :c:struct:`spi_cs_control` to remove anonymous struct. |
| This causes possible breakage for static initialization of the |
| struct. Updated :c:macro:`SPI_CS_CONTROL_PTR_DT` to reflect |
| this change. |
| |
| * The :kconfig:option:`CONFIG_LEGACY_INCLUDE_PATH` option has been disabled by |
| default, all upstream code and modules have been converted to use |
| ``<zephyr/...>`` header paths. The option is still available to facilitate |
| the migration of external applications, but will be removed with the 3.4 |
| release. The :zephyr_file:`scripts/utils/migrate_includes.py` script is |
| provided to automate the migration. |
| |
| * :zephyr_file:`include/zephyr/zephyr.h` no longer defines ``__ZEPHYR__``. |
| This definition can be used by third-party code to compile code conditional |
| to Zephyr. The definition is already injected by the Zephyr build system. |
| Therefore, any third-party code integrated using the Zephyr build system will |
| require no changes. External build systems will need to inject the definition |
| by themselves, if they did not already. |
| |
| * :zephyr_file:`include/zephyr/zephyr.h` has been deprecated in favor of |
| :zephyr_file:`include/zephyr/kernel.h`, since it only included that header. No |
| changes are required by applications other than replacing ``#include |
| <zephyr/zephyr.h>`` with ``#include <zephyr/kernel.h>``. |
| |
| * Bluetooth: Applications where :kconfig:option:`CONFIG_BT_EATT` is enabled |
| must set the :c:member:`chan_opt` field on the GATT parameter structs. |
| To keep the old behavior use :c:enumerator:`BT_ATT_CHAN_OPT_NONE`. |
| |
| * CAN |
| |
| * The Zephyr SocketCAN definitions have been moved from :zephyr_file:`include/zephyr/drivers/can.h` |
| to :zephyr_file:`include/zephyr/net/socketcan.h`, the SocketCAN ``struct can_frame`` has been |
| renamed to :c:struct:`socketcan_frame`, and the SocketCAN ``struct can_filter`` has been renamed |
| to :c:struct:`socketcan_filter`. The SocketCAN utility functions are now available in |
| :zephyr_file:`include/zephyr/net/socketcan_utils.h`. |
| |
| * The CAN controller ``struct zcan_frame`` has been renamed to :c:struct:`can_frame`, and ``struct |
| zcan_filter`` has been renamed to :c:struct:`can_filter`. |
| |
| * The :c:enum:`can_state` enumerations have been renamed to contain the word STATE in order to make |
| their context more clear: |
| |
| * ``CAN_ERROR_ACTIVE`` renamed to :c:enumerator:`CAN_STATE_ERROR_ACTIVE`. |
| * ``CAN_ERROR_WARNING`` renamed to :c:enumerator:`CAN_STATE_ERROR_WARNING`. |
| * ``CAN_ERROR_PASSIVE`` renamed to :c:enumerator:`CAN_STATE_ERROR_PASSIVE`. |
| * ``CAN_BUS_OFF`` renamed to :c:enumerator:`CAN_STATE_BUS_OFF`. |
| |
| * The error code for :c:func:`can_send` when the CAN controller is in bus off state has been |
| changed from ``-ENETDOWN`` to ``-ENETUNREACH``. A return value of ``-ENETDOWN`` now indicates |
| that the CAN controller is in :c:enumerator:`CAN_STATE_STOPPED`. |
| |
| * The list of valid return values for the CAN timing calculation functions have been expanded to |
| allow distinguishing between an out of range bitrate/sample point, an unsupported bitrate, and a |
| resulting sample point outside the guard limit. |
| |
| * Memory Management Drivers |
| |
| * Added :c:func:`sys_mm_drv_update_page_flags` and |
| :c:func:`sys_mm_drv_update_region_flags` to update flags associated |
| with memory pages and regions. |
| |
| Removed APIs in this release |
| ============================ |
| |
| * The following functions, macros, and structures related to the |
| deprecated kernel work queue API have been removed: |
| |
| * ``k_work_pending()`` |
| * ``k_work_q_start()`` |
| * ``k_delayed_work`` |
| * ``k_delayed_work_init()`` |
| * ``k_delayed_work_submit_to_queue()`` |
| * ``k_delayed_work_submit()`` |
| * ``k_delayed_work_pending()`` |
| * ``k_delayed_work_cancel()`` |
| * ``k_delayed_work_remaining_get()`` |
| * ``k_delayed_work_expires_ticks()`` |
| * ``k_delayed_work_remaining_ticks()`` |
| * ``K_DELAYED_WORK_DEFINE`` |
| |
| * Removed support for enabling passthrough mode on MPU9150 to |
| AK8975 sensor. |
| |
| * Removed deprecated SPI :c:struct:`spi_cs_control` fields for GPIO management |
| that have been replaced with :c:struct:`gpio_dt_spec`. |
| |
| * Removed support for configuring the CAN-FD maximum DLC value via Kconfig |
| ``CONFIG_CANFD_MAX_DLC``. |
| |
| * Removed deprecated civetweb module and the associated support code and samples. |
| |
| Deprecated in this release |
| ========================== |
| |
| * :c:macro:`DT_SPI_DEV_CS_GPIOS_LABEL` and |
| :c:macro:`DT_INST_SPI_DEV_CS_GPIOS_LABEL` are deprecated in favor of |
| utilizing :c:macro:`DT_SPI_DEV_CS_GPIOS_CTLR` and variants. |
| |
| * :c:macro:`DT_GPIO_LABEL`, :c:macro:`DT_INST_GPIO_LABEL`, |
| :c:macro:`DT_GPIO_LABEL_BY_IDX`, and :c:macro:`DT_INST_GPIO_LABEL_BY_IDX`, |
| are deprecated in favor of utilizing :c:macro:`DT_GPIO_CTLR` and variants. |
| |
| * :c:macro:`DT_LABEL`, and :c:macro:`DT_INST_LABEL`, are deprecated |
| in favor of utilizing :c:macro:`DT_PROP` and variants. |
| |
| * :c:macro:`DT_BUS_LABEL`, and :c:macro:`DT_INST_BUS_LABEL`, are deprecated |
| in favor of utilizing :c:macro:`DT_BUS` and variants. |
| |
| * STM32 LPTIM domain clock should now be configured using devicetree. |
| Related Kconfig :kconfig:option:`CONFIG_STM32_LPTIM_CLOCK` option is now |
| deprecated. |
| |
| * ``label`` property from devicetree as a base property. The property is still |
| valid for specific bindings to specify like :dtcompatible:`gpio-leds` and |
| :dtcompatible:`fixed-partitions`. |
| |
| * Bluetooth mesh Configuration Client API prefixed with ``bt_mesh_cfg_`` |
| is deprecated in favor of a new API with prefix ``bt_mesh_cfg_cli_``. |
| |
| * Pinmux API is now officially deprecated in favor of the pin control API. |
| Its removal is scheduled for the 3.4 release. Refer to :ref:`pinctrl-guide` |
| for more details on pin control. |
| |
| Stable API changes in this release |
| ================================== |
| |
| New APIs in this release |
| ======================== |
| |
| * CAN |
| |
| * Added :c:func:`can_start` and :c:func:`can_stop` API functions for starting and stopping a CAN |
| controller. Applications will need to call :c:func:`can_start` to bring the CAN controller out |
| of :c:enumerator:`CAN_STATE_STOPPED` before being able to transmit and receive CAN frames. |
| * Added :c:func:`can_get_capabilities` for retrieving a bitmask of the capabilities supported by a |
| CAN controller. |
| * Added :c:enumerator:`CAN_MODE_ONE_SHOT` for enabling CAN controller one-shot transmission mode. |
| * Added :c:enumerator:`CAN_MODE_3_SAMPLES` for enabling CAN controller triple-sampling receive |
| mode. |
| |
| * I3C |
| |
| * Added a set of new API for I3C controllers. |
| |
| * W1 |
| |
| * Introduced the :ref:`W1 api<w1_api>`, used to interact with 1-Wire masters. |
| |
| Kernel |
| ****** |
| |
| * Source files using multiple :c:macro:`SYS_INIT` macros with the |
| same initialisation function must now use :c:macro:`SYS_INIT_NAMED` |
| with unique names per instance. |
| |
| Architectures |
| ************* |
| |
| * ARC |
| |
| * ARM |
| |
| * Improved HardFault handling on Cortex-M. |
| * Enabled automatic placement of the IRQ vector table. |
| * Enabled S2RAM for Cortex-M, hooking up the provided API functions. |
| * Added icache and dcache maintenance functions, and switched to the new |
| Kconfig symbols (:kconfig:option:`CPU_HAS_DCACHE` and |
| :kconfig:option:`CPU_HAS_ICACHE`). |
| * Added data/instr. sync barriers after writing to ``SCTLR`` to disable MPU. |
| * Use ``spsr_cxsf`` instead of unpredictable ``spsr_hyp`` on Cortex-R52. |
| * Removes ``-Wstringop-overread`` warning with GCC 12. |
| * Fixed handling of system off failure. |
| * Fixed issue with incorrect ``ssf`` under bad syscall. |
| * Fixed region check issue with mmu. |
| |
| * ARM64 |
| |
| * :c:func:`arch_mem_map` now supports :c:enumerator:`K_MEM_PERM_USER`. |
| * Added :kconfig:option:`CONFIG_WAIT_AT_RESET_VECTOR` to spin at reset vector |
| allowing a debugger to be attached. |
| * Implemented erratum 822227 "Using unsupported 16K translation granules |
| might cause Cortex-A57 to incorrectly trigger a domain fault". |
| * Enabled single-threaded support for some platforms. |
| * IRQ stack is now initialized when :kconfig:option:`CONFIG_INIT_STACKS` is set. |
| * Fixed issue when cache API are used from userspace. |
| * Fixed issue about the way IPI are delivered. |
| * TF-A (TrustedFirmware-A) is now shipped as module |
| |
| * Posix |
| |
| * RISC-V |
| |
| * x86 |
| |
| * Xtensa |
| |
| * Macros ``RSR`` and ``WSR`` have been renamed to :c:macro:`XTENSA_RSR` |
| and :c:macro:`XTENSA_WSR` to give them proper namespace. |
| * Fixed a rounding error in timing function when coverting from cycles |
| to nanoseconds. |
| * Fixed the calculation of average "cycles to nanoseconds" to actually |
| return nanoseconds instead of cycles. |
| |
| Bluetooth |
| ********* |
| |
| * Audio |
| |
| * Implemented central security establishment when required |
| * Added additional security level options to the connection call |
| * Switched the unicast client and server to bidirectional CIS if available |
| * Added a new RSI advertising callback for CSIS |
| * Added multiple improvements to context handling, including public functions |
| to get contexts |
| * Added ordered access procedure for the CSIS client, as well as storing |
| active members by rank |
| * Added support for Write Preset Name in HAS |
| * Added support for using PACS for the broadcast sink role |
| * Cleaned up the MICP implementation, including renaming several structures |
| and functions |
| * Implemented the CAP Acceptor role |
| * Added ASCS Metadata verification support |
| * Started exposing broadcast sink advertising data to the application |
| * Added support for unicast server start, reconfigure, release, disable and |
| metadata |
| * Added support for multi-CIS |
| * Implemented HAS client support for preset switching |
| * Added support for setting vendor-specific non-HCI data paths for audio |
| streams |
| |
| * Direction Finding |
| |
| * Added support for selectable IQ samples conversion to 8-bit |
| * Added support for VS IQ sample reports in ``int16_t`` format |
| |
| * Host |
| |
| * Added support for LE Secure Connections permission checking |
| * Added support for Multiple Variable Length Read procedure without EATT |
| * Added a new callback :c:func:`rpa_expired` in the struct |
| :c:struct:`bt_le_ext_adv_cb` to enable synchronization of the advertising |
| payload updates with the Resolvable Private Address (RPA) rotations when |
| the :kconfig:option:`CONFIG_BT_PRIVACY` is enabled |
| * Added a new :c:func:`bt_le_set_rpa_timeout()` API call to dynamically change |
| the the Resolvable Private Address (RPA) timeout when the |
| :kconfig:option:`CONFIG_BT_RPA_TIMEOUT_DYNAMIC` is enabled |
| * Added :c:func:`bt_conn_auth_cb_overlay` to overlay authentication callbacks |
| for a Bluetooth LE connection |
| * Removed ``CONFIG_BT_HCI_ECC_STACK_SIZE``. A new Bluetooth long workqueue |
| (:kconfig:option:`CONFIG_BT_LONG_WQ`) is used for processing ECC commands |
| instead of the former dedicated thread |
| * :c:func:`bt_conn_get_security` and :c:func:`bt_conn_enc_key_size` now take |
| a ``const struct bt_conn*`` argument |
| * The handling of GATT multiple notifications has been rewritten, and is now |
| only to be used as a low-level API |
| * Added support for GATT CCCs in arbitrary locations as a client |
| * Extended the ``bt_conn_info`` structure with security information |
| * Added a new :kconfig:option:`CONFIG_BT_PRIVACY_RANDOMIZE_IR` that prevents |
| the Host from using Controller-provided identity roots |
| * Added support for GATT over EATT |
| * Implemented the Immediate Alert Client |
| |
| * Mesh |
| |
| * Added support for selectable RPL backends |
| * Changed the way segmented messages are sent, avoiding bulk transmission |
| * Added an async config client API |
| * Added model publish support to the Health Client |
| * Moved relayed messages to a separate buffer pool |
| * Reduced delay of sending segment acknowledge message. Set |
| :kconfig:option:`CONFIG_BT_MESH_SEG_ACK_PER_SEGMENT_TIMEOUT` to 100 to get |
| the previous timing. |
| * Restructured shell commands |
| |
| * Controller |
| |
| * Made the new LLCP implementation the default one. Enable |
| :kconfig:option:`CONFIG_BT_LL_SW_LLCP_LEGACY` to revert back to the legacy |
| implementation |
| * Marked Extended Advertising as stable, no longer experimental |
| * Added deinit() infrastructure in order to properly support disabling |
| Bluetooth support, including the controller |
| * Implemented the Peripheral CIS Create procedure |
| * Implemented the CIS Terminate procedure |
| * Added support for Periodic Advertising ADI |
| * Implemented support for Extended Scan Response Data fragment operations |
| * Enable back-to-back PDU chaining for AD data |
| * Added a new :kconfig:option:`CONFIG_BT_CTLR_SYNC_PERIODIC_SKIP_ON_SCAN_AUX` |
| for allowing periodic sync event skipping |
| * Added a new :kconfig:option:`CONFIG_BT_CTLR_SCAN_AUX_SYNC_RESERVE_MIN` for |
| minimal time resevation |
| * Implemented ISO Test Mode HCI commands |
| * Added support for multiple BIS sync selection within a BIG |
| * Implement flushing pending ISO TX PDUs when a BIG event is terminated |
| * Added a new :kconfig:option:`CONFIG_BT_CTLR_ADV_DATA_CHAIN` to enable |
| experimental Advertising Data chaining support |
| |
| * HCI Driver |
| |
| * Added a new Telink B91 HCI driver |
| |
| Boards & SoC Support |
| ******************** |
| |
| * Added support for these SoC series: |
| |
| * Atmel SAML21, SAMR34, SAMR35. |
| * GigaDevice GD32E50X |
| * GigaDevice GD32F470 |
| * NXP i.MX8MN, LPC55S36, LPC51U68 |
| * renesas_smartbond da1469x SoC series |
| |
| * Made these changes in other SoC series: |
| |
| * gigadevice: Enable SEGGER RTT |
| |
| * Added support for these ARM boards: |
| |
| * Arduino MKR Zero |
| * Atmel atsaml21_xpro |
| * Atmel atsamr34_xpro |
| * Blues Wireless Swan |
| * Digilent Zybo |
| * EBYTE E73-TBB |
| * GigaDevice GD32E507V-START |
| * GigaDevice GD32E507Z-EVAL |
| * GigaDevice GD32F407V-START |
| * GigaDevice GD32F450V-START |
| * GigaDevice GD32F450Z-EVAL |
| * GigaDevice GD32F470I-EVAL |
| * NXP lpcxpresso51u68, RT1060 EVKB |
| * NXP lpcxpresso55s36 |
| * Olimex LoRa STM32WL DevKit |
| * PAN1770 Evaluation Board |
| * PAN1780 Evaluation Board |
| * PAN1781 Evaluation Board |
| * PAN1782 Evaluation Board |
| * ST STM32F7508-DK Discovery Kit |
| * TDK RoboKit 1 |
| * WeAct Studio Black Pill V1.2 |
| * WeAct Studio Black Pill V3.0 |
| * XIAO BLE |
| * da1469x_dk_pro |
| |
| * Added support for these ARM64 boards: |
| |
| * i.MX8M Nano LPDDR4 EVK board series |
| |
| * Added support for these RISC-V boards: |
| |
| * ICE-V Wireless |
| * RISCV32E Emulation (QEMU) |
| |
| * Added support for these Xtensa boards: |
| |
| * ESP32-NET |
| * intel_adsp_ace15_mtpm |
| |
| * Removed support for these Xtensa boards: |
| |
| * Intel S1000 |
| |
| * Made these changes in other boards: |
| |
| * sam_e70_xplained: Uses EEPROM devicetree bindings for Ethernet MAC |
| * sam_v71_xult: Uses EEPROM devicetree bindings for Ethernet MAC |
| |
| * Added support for these following shields: |
| |
| * ARCELI W5500 ETH |
| * MAX7219 LED display driver shield |
| * Panasonic Grid-EYE (AMG88xx) |
| |
| Drivers and Sensors |
| ******************* |
| |
| * ADC |
| |
| * STM32: Now supports Vbat monitoring channel and STM32U5 series. |
| * Added driver for GigaDevice GD32 SoCs |
| |
| * Audio |
| |
| * CAN |
| |
| * A driver for bridging from :ref:`native_posix` to Linux SocketCAN has been added. |
| * A driver for the Espressif ESP32 TWAI has been added. See the |
| :dtcompatible:`espressif,esp32-twai` devicetree binding for more information. |
| * The STM32 CAN-FD CAN driver clock configuration has been moved from Kconfig to :ref:`devicetree |
| <dt-guide>`. See the :dtcompatible:`st,stm32-fdcan` devicetree binding for more information. |
| * The filter handling of STM32 bxCAN driver has been simplified and made more reliable. |
| * The STM32 bxCAN driver now supports dual intances. |
| * The CAN loopback driver now supports CAN-FD. |
| * The CAN shell module has been rewritten to properly support the additions and changes to the CAN |
| controller API. |
| * The Zephyr network CAN bus driver, which provides raw L2 access to the CAN bus via a CAN |
| controller driver, has been moved to :zephyr_file:`drivers/net/canbus.c` and can now be enabled |
| using :kconfig:option:`CONFIG_NET_CANBUS`. |
| * Added CAN support for NXP LPC55S36. |
| |
| * Clock control |
| |
| * STM32: PLL_P, PLL_Q, PLL_R outputs can now be used as domain clock. |
| * Added driver for GigaDevice GD32 SoCs (peripheral clocks configuration only) |
| |
| * Coredump |
| |
| * Counter |
| |
| * STM32: RTC : Now supports STM32U5 and STM32F1 series. |
| * STM32: Timer : Now supports STM32L4 series. |
| * Added counter support using CTimer for NXP MIMXRT595. |
| |
| * Crypto |
| |
| * DAC |
| |
| * DAI |
| |
| * Display |
| |
| * Disk |
| |
| * Added support for DMA transfers when using STM32 SD host controller |
| * Added support for SD host controller present on STM32L5X family |
| |
| * DMA |
| |
| * STM32: Now supports stm32u5 series. |
| * cAVS drivers renamed with the broader Intel ADSP naming |
| * Kconfig depends on improvements with device tree statuses |
| * Added driver for GigaDevice GD32 SoCs |
| * Added DMA support for NXP MIMXRT595 |
| |
| * EEPROM |
| |
| * Added Microchip XEC (MEC172x) on-chip EEPROM driver. See the |
| :dtcompatible:`microchip,xec-eeprom` devicetree binding for more information. |
| |
| * Entropy |
| |
| * ESPI |
| |
| * Ethernet |
| |
| * Atmel gmac: Add EEPROM devicetree bindings for MAC address. |
| * Performance improvements on the NXP MCUX Ethernet Driver. |
| |
| * Flash |
| |
| * Atmel eefc: Fix support for Cortex-M4 variants. |
| * Added flash driver for Renesas Smartbond platform |
| * STM32: Added OSPI NOR-flash driver. Supports STM32H7 and STM32U5. Supports DMA. |
| * Added driver for GigaDevice GD32 SoCs |
| * Added Flash support for NXP LPCXpresso55S36. |
| * Added Flash support for NXP MIMXRT595 EVK. |
| |
| * GPIO |
| |
| * Added GPIO driver for Renesas Smartbond platform |
| |
| * HWINFO |
| |
| * I2C |
| |
| * Terminology updated to latest i2c specification removing master/slave |
| terminology and replacing with controller/target terminology. |
| * Asynchronous APIs added for requesting i2c transactions without |
| waiting for the completion of them. |
| * Added NXP LPI2C driver asynchronous i2c implementation with sample |
| showing usage with a FRDM-K64F board. |
| * STM32: support for second target address was added. |
| * Kconfig depends on improvements with device tree statuses |
| * Improved ITE I2C support with FIFO and command queue mode |
| * Improve gd32 driver stability (remove repeated START, use STOP + START conditions instead) |
| * Fixed gd32 driver incorrect Fast-mode config |
| * Add bus recovery support to the NXP MCUX LPI2C driver. |
| * Enable I2C support on NXP MIMXRT595 EVK. |
| |
| * I2S |
| |
| * I3C |
| |
| * Added a driver to support the NXP MCUX I3C hardware acting as the primary controller |
| on the bus (tested using RT685). |
| |
| * IEEE 802.15.4 |
| |
| * All IEEE 802.15.4 drivers have been converted to Devicetree-based drivers. |
| * Atmel AT86RF2xx: Add Power Table on devicetree. |
| * Atmel AT86RF2xx: Add support to RF212/212B Sub-Giga devices. |
| |
| * Interrupt Controller |
| |
| * Added support for ACE V1X. |
| * Fixed an addressing issue on GICv3 controllers. |
| * Removed support for ``intel_s1000_crb``. |
| |
| * IPM |
| |
| * Kconfig is split into smaller, vendor oriented files. |
| * Support for Intel S1000 in cAVS IDC driver has been removed as the board |
| ``intel_s1000_crb`` has been removed. |
| |
| * KSCAN |
| * Enable the touch panel on the NXP MIMXRT1170 EVK. |
| |
| * LED |
| |
| * LoRa |
| |
| * MBOX |
| |
| * MEMC |
| |
| * Added support for Atmel SAM SMC/EBI. |
| |
| * MM |
| |
| * Modem |
| |
| * PCIE |
| |
| * Added a ``dump`` subcommand to the ``pcie`` shell command to print out |
| the first 16 configuration space registers. |
| * Added a ``ls`` subcommand to the ``pcie`` shell command to list |
| devices. |
| |
| * PECI |
| |
| * Added PECI driver for Nuvoton NPCX family. |
| * Devicetree binding for ITE it8xxx2 PECI driver has changed from |
| ``ite,peci-it8xxx2`` to :dtcompatible:`ite,it8xxx2-peci` so that this aligns |
| with other ITE devices. |
| |
| * Pin control |
| |
| * Added driver for Infineon XMC4XXX |
| * Added driver for Renesas Smartbond platform |
| * Added driver for Xilinx Zynq-7000 |
| * Added support for PSL pads in NPCX driver |
| * MEC15XX driver now supports both MEC15XX and MEC17XX |
| * nRF driver now supports disconnecting a pin by using ``NRF_PSEL_DISCONNECT`` |
| * nRF driver will use S0D1 drive mode for TWI/TWIM pins by default |
| |
| * PWM |
| |
| * Added PWM driver for Renesas R-Car platform |
| * Added PWM support for NXP LPC55S36 |
| |
| * Power Domain |
| |
| * Enabled access to the PMIC on NXP MXRT595 EVK. |
| * Added soft off mode to the RT10xx Power Management. |
| * Added support for power gating for Intel ADSP devices. |
| |
| * Reset |
| |
| * Added driver for GigaDevice GD32 SoCs |
| |
| * SDHC |
| |
| * Added SDHC driver for NXP LPCXpresso platform |
| * Added support for card busy signal in SDHC SPI driver, to support |
| the :ref:`File System API <file_system_api>` |
| |
| * Sensor |
| |
| * Converted drivers to use Kconfig 'select' instead of 'depends on' for I2C, |
| SPI, and GPIO dependencies. |
| * Converted drivers to use I2C, SPI, and GPIO dt_spec helpers. |
| * Added multi-instance support to various drivers. |
| * Added DS18B20 1-wire temperature sensor driver. |
| * Added Würth Elektronik WSEN-HIDS driver. |
| * Fixed unit conversion in the ADXL345 driver. |
| * Fixed TTE and TTF time units in the MAX17055 driver. |
| * Removed MPU9150 passthrough support from the AK8975 driver. |
| * Changed the FXOS8700 driver default mode from accel-only to hybrid. |
| * Enhanced the ADXL345 driver to support SPI. |
| * Enhanced the BQ274XX driver to support the data ready interrupt trigger. |
| * Enhanced the INA237 driver to support triggered mode. |
| * Enhanced the LPS22HH driver to support being on an I3C bus. |
| * Enhanced the MAX17055 driver to support VFOCV. |
| |
| * Serial |
| |
| * Added serial driver for Renesas Smartbond platform |
| * The STM32 driver now allows to use serial device as stop mode wake up source. |
| * Added check for clock control device readiness during configuration |
| for various drivers. |
| * Various fixes on ``lpuart``. |
| * Added a workaround on bytes dropping on ``nrfx_uarte``. |
| * Fixed compilation error on ``uart_pl011`` when interrupt is diabled. |
| * Added power management support on ``stm32``. |
| * ``xlnx_ps`` has moved to using ``DEVICE_MMIO`` API. |
| * ``gd32`` now supports using reset API to reset hardware and clock |
| control API to enable UART clock. |
| |
| * SPI |
| |
| * Add interrupt-driven mode support for gd32 driver |
| * Enable SPI support on NXP MIMXRT595 EVK. |
| |
| * Timer |
| |
| * STM32 LPTIM based timer should now be configured using device tree. |
| |
| * USB |
| |
| * Restructured the NXP MCUX USB driver. |
| * Added USB support for NXP MXRT595. |
| |
| * W1 |
| |
| * Added Zephyr-Serial 1-Wire master driver. |
| * Added DS2484 1-Wire master driver. See the :dtcompatible:`maxim,ds2484` |
| devicetree binding for more information. |
| * Added DS2485 1-Wire master driver. See the :dtcompatible:`maxim,ds2485` |
| devicetree binding for more information. |
| * Introduced a shell module for 1-Wire. |
| |
| * Watchdog |
| |
| * Added support for Raspberry Pi Pico watchdog. |
| * Added watchdog support on NXP MIMXRT595 EVK. |
| |
| * WiFi |
| |
| Networking |
| ********** |
| |
| * CoAP: |
| |
| * Replaced constant CoAP retransmission count and acknowledgment random factor |
| with configurable :kconfig:option:`CONFIG_COAP_ACK_RANDOM_PERCENT` and |
| :kconfig:option:`CONFIG_COAP_MAX_RETRANSMIT`. |
| * Updated :c:func:`coap_packet_parse` and :c:func:`coap_handle_request` to |
| return different error code based on the reason of parsing error. |
| |
| * Ethernet: |
| |
| * Added EAPoL and IEEE802154 Ethernet protocol types. |
| |
| * HTTP: |
| |
| * Improved API documentation. |
| |
| * LwM2M: |
| |
| * Moved LwM2M 1.1 support out of experimental. |
| * Refactored SenML-JSON and JSON econder/decoder to use Zephyr's JSON library |
| internally. |
| * Extended LwM2M shell module with the following commands: ``exec``, ``read``, |
| ``write``, ``start``, ``stop``, ``update``, ``pause``, ``resume``. |
| * Refactored LwM2M engine module into smaller sub-modules: LwM2M registry, |
| LwM2M observation, LwM2M message handling. |
| * Added an implementation of the LwM2M Access Control object (object ID 2). |
| * Added support for LwM2M engine pause/resume. |
| * Improved API documentation of the LwM2M engine. |
| * Improved thread safety of the LwM2M library. |
| * Added :c:func:`lwm2m_registry_lock` and :c:func:`lwm2m_registry_unlock` |
| functions, which allow to update multiple resources w/o sending a |
| notification for every update. |
| * Multiple minor fixes/improvements. |
| |
| * Misc: |
| |
| * ``CONFIG_NET_CONFIG_IEEE802154_DEV_NAME`` has been removed in favor of |
| using a Devicetree choice given by ``zephyr,ieee802154``. |
| * Fixed net_pkt leak with shallow clone. |
| * Fixed websocket build with :kconfig:option:`CONFIG_POSIX_API`. |
| * Extracted zperf shell commands into a library. |
| * Added support for building and using IEEE 802.15.4 L2 without IP support. |
| * General clean up of inbound packet handling. |
| * Added support for restarting DHCP w/o randomized delay. |
| * Fixed a bug, where only one packet could be queued on a pending ARP |
| request. |
| |
| * OpenThread: |
| |
| * Moved OpenThread glue code into ``modules`` directory. |
| * Fixed OpenThread build with :kconfig:option:`CONFIG_NET_MGMT_EVENT_INFO` |
| disabled. |
| * Fixed mbed TLS configuration for Service Registration Protocol (SRP) |
| OpenThread feature. |
| * Added Kconfig option to enable Thread 1.3 support |
| (:kconfig:option:`CONFIG_OPENTHREAD_THREAD_VERSION_1_3`). |
| * Updated :c:func:`otPlatSettingsSet` according to new API documentation. |
| * Added new Kconfig options: |
| |
| * :kconfig:option:`CONFIG_OPENTHREAD_MESSAGE_BUFFER_SIZE` |
| * :kconfig:option:`CONFIG_OPENTHREAD_MAC_STAY_AWAKE_BETWEEN_FRAGMENTS` |
| |
| * Sockets: |
| |
| * Fixed filling of the address structure provided in :c:func:`recvfrom` for |
| packet socket. |
| * Fixed a potential deadlock in TCP :c:func:`send` call. |
| * Added support for raw 802.15.4 packet socket. |
| |
| * TCP: |
| |
| * Added support for Nagle's algorithm. |
| * Added "Silly Window Syndrome" avoidance. |
| * Fixed MSS calculation. |
| * Avoid unnecessary packet cloning on the RX path. |
| * Implemented randomized retransmission timeouts and exponential backoff. |
| * Fixed out-of-order data processing. |
| * Implemented fast retransmit algorithm. |
| * Multiple minor fixes/improvements. |
| |
| * Wi-Fi |
| |
| * Added support for using offloaded wifi_mgmt API with native network stack. |
| * Extended Wi-Fi headers with additional Wi-Fi parameters (security, bands, |
| modes). |
| * Added new Wi-Fi management APIs for retrieving status and statistics. |
| |
| USB |
| *** |
| |
| Build System |
| ************ |
| |
| * Removed deprecated ``GCCARMEMB_TOOLCHAIN_PATH`` setting |
| |
| Devicetree |
| ********** |
| |
| * API |
| |
| * Bindings |
| |
| Libraries / Subsystems |
| ********************** |
| |
| * Console |
| |
| * C Library |
| |
| * Added Picolibc as a Zephyr module. Picolibc module is a footprint-optimized |
| full C standard library implementation that is configurable at the build |
| time. |
| * C library heap initialization call has been moved from the ``APPLICATION`` |
| phase to the ``POST_KERNEL`` phase to allow calling the libc dynamic memory |
| management functions (e.g. ``malloc()``) during the application |
| initialization phase. |
| * Added ``strerror()`` and ``strerror_r()`` functions to the minimal libc. |
| * Removed architecture-specific ``off_t`` type definition in the minimal |
| libc. ``off_t`` is now defined as ``intptr_t`` regardless of the selected |
| architecture. |
| |
| * C++ Subsystem |
| |
| * Added ``std::ptrdiff_t``, ``std::size_t``, ``std::max_align_t`` and |
| ``std::nullptr_t`` type definitions to the C++ subsystem ``cstddef`` |
| header. |
| * Renamed global constructor list symbols to prevent the native POSIX host |
| runtime from executing the constructors before Zephyr loads. |
| |
| * Emul |
| |
| * Filesystem |
| |
| * IPC |
| |
| * Management |
| |
| * MCUMGR race condition when using the task status function whereby if a |
| thread state changed it could give a falsely short process list has been |
| fixed. |
| * MCUMGR shell (group 9) CBOR structure has changed, the ``rc`` |
| response is now only used for mcumgr errors, shell command |
| execution result codes are instead returned in the ``ret`` |
| variable instead, see :ref:`mcumgr_smp_group_9` for updated |
| information. Legacy bahaviour can be restored by enabling |
| :kconfig:option:`CONFIG_MCUMGR_CMD_SHELL_MGMT_LEGACY_RC_RETURN_CODE` |
| * MCUMGR img_mgmt erase command now accepts an optional slot number |
| to select which image will be erased, using the ``slot`` input |
| (will default to slot 1 if not provided). |
| * MCUMGR :kconfig:option:`CONFIG_OS_MGMT_TASKSTAT_SIGNED_PRIORITY` is now |
| enabled by default, this makes thread priorities in the taskstat command |
| signed, which matches the signed priority of tasks in Zephyr, to revert |
| to previous behaviour of using unsigned values, disable this Kconfig. |
| * MCUMGR taskstat runtime field support has been added, if |
| :kconfig:option:`CONFIG_OS_MGMT_TASKSTAT` is enabled, which will report the |
| number of CPU cycles have been spent executing the thread. |
| * MCUMgr transport API drops ``zst`` parameter, of :c:struct:`zephyr_smp_transport` |
| type, from :c:func:`zephyr_smp_transport_out_fn` type callback as it has |
| not been used, and the ``nb`` parameter, of :c:struct:`net_buf` type, |
| can carry additional transport information when needed. |
| * A dummy SMP transport has been added which allows for testing MCUMGR |
| functionality and commands/responses. |
| * An issue with the UART/shell transports whereby large packets would wrongly |
| be split up with multiple start-of-frame headers instead of only one has been |
| fixed. |
| * SMP now runs in its own dedicated work queue which prevents issues running in |
| the system workqueue with some transports, e.g. Bluetooth, which previously |
| caused a deadlock if buffers could not be allocated. |
| * Bluetooth transport will now reduce the size of packets that are sent if they |
| are too large for the remote device instead of failing to send them, if the |
| remote device cannot accept a notification of 20 bytes then the attempt is |
| aborted. |
| * Unaligned memory access problems for CPUs that do not support it in MCUMGR |
| headers has been fixed. |
| * Groups in MCUMGR now use kernel slist entries rather than the custom MCUMGR |
| structs for storage. |
| * Levels of function redirection which were previously used to support multiple |
| OS's have been reduced to simplify code and reduce output size. |
| |
| * Cbprintf and logging |
| |
| * Updated cbprintf static packaging to interpret ``unsigned char *`` as a pointer |
| to a string. See :ref:`cbprintf_packaging_limitations` for more details about |
| how to efficienty use strings. Change mainly applies to the ``logging`` subsystem |
| since it uses this feature. |
| * Added :c:macro:`LOG_RAW` for logging strings without additional formatting. |
| It is similar to :c:macro:`LOG_PRINTK` but do not append ``<cr>`` when new line is found. |
| |
| * IPC |
| |
| * Introduced a 'zephyr,buffer-size' DT property to set the sizes for TX and |
| RX buffers per created instance. |
| * Set WQ priority back to PRIO_PREEMPT to fix an issue that was starving the scheduler. |
| * ``icmsg_buf`` library was renamed to ``spsc_pbuf``. |
| * Added cache handling support to ``spsc_pbuf``. |
| * Fixed an issue where the TX virtqueue was misaligned by 2 bytes due to the |
| way the virtqueue start address is calculated |
| * Added :c:func:`ipc_service_deregister_endpoint` function to deregister endpoints. |
| |
| * LoRaWAN |
| |
| * Modbus |
| |
| * Power management |
| |
| * POSIX |
| |
| * Make ``tz`` non-const in ``gettimeofday()`` for conformance to spec. |
| * Fix pthread descriptor resource leak. Previously only pthreads with state |
| ``PTHREAD_TERMINATED`` could be reused. However, ``pthread_join()`` sets |
| the state to ``PTHREAD_EXITED``. Consider both states as candidates in |
| ``pthread_create()``. |
| * Add ``perror()`` implementation |
| * Use consistent timebase in ``sem_timedwait()`` |
| |
| * RTIO |
| |
| * Initial version of an asynchronous task and executor API for I/O similar inspired |
| by Linux's very successful io_uring. |
| * Provides a simple linear and limited concurrency executor, simple task queuing, |
| and the ability to poll for task completions. |
| |
| * SD Subsystem |
| |
| * SDMMC STM32: Now compatible with STM32L5 series. Added DMA support for DMA-V1 |
| compatible devices. |
| |
| * Settings |
| |
| * Shell |
| |
| * Storage |
| |
| * Testsuite |
| |
| * Tracing |
| |
| HALs |
| **** |
| |
| * Atmel |
| |
| * sam: Fix incorrect CIDR values for revision b silicon of SAMV71 devices. |
| |
| * Espressif |
| |
| * GigaDevice |
| |
| * Added support for gd32e50x |
| * gd32e10x: upgraded to v1.3.0 |
| * gd32f4xx: upgraded to v3.0.0 |
| |
| * NXP |
| |
| * Updated the NXP MCUX SDK to version 2.12 |
| * Updated the USB middleware to version 2.12 |
| * Removed all binary Blobs for power management libraries |
| * Removed all binary archive files |
| |
| * Nordic |
| |
| * RPi Pico |
| |
| * Renesas |
| |
| * ST |
| |
| * STM32 |
| |
| * stm32cube: update stm32f7 to cube version V1.17.0 |
| * stm32cube: update stm32g0 to cube version V1.6.1 |
| * stm32cube: update stm32g4 to cube version V1.5.1 |
| * stm32cube: update stm32l4 to cube version V1.17.2 |
| * stm32cube: update stm32u5 to cube version V1.1.1 |
| * stm32cube: update stm32wb to cube version V1.14.0 |
| |
| * Silabs |
| |
| * TI |
| |
| * Telink |
| |
| * Wurth Elektronik |
| |
| * Xtensa |
| |
| MCUboot |
| ******* |
| |
| Trusted Firmware-M |
| ****************** |
| |
| * Allow enabling FPU in the application when TF-M is enabled. |
| * Added option to exclude non-secure TF-M application from build. |
| * Relocated ``mergehex.py`` to ``scripts/build``. |
| * Added option for custom reset handlers. |
| |
| Documentation |
| ************* |
| |
| Tests and Samples |
| ***************** |
| |
| * A large number of tests have been reworked to use the new ztest API, see |
| :ref:`test-framework` for more details. This should be used for newly |
| introduce tests as well. |
| |
| Issue Related Items |
| ******************* |
| |
| These GitHub issues were addressed since the previous 3.1.0 tagged |
| release: |
