| .. _nucleo_c031c6_board: |
| |
| ST Nucleo C031C6 |
| ################ |
| |
| Overview |
| ******** |
| The STM32 Nucleo-64 development board with STM32C031C6 MCU, supports Arduino and ST morpho connectivity. |
| |
| The STM32 Nucleo board provides an affordable, and flexible way for users to try out new concepts, |
| and build prototypes with the STM32 microcontroller, choosing from the various |
| combinations of performance, power consumption and features. |
| |
| The STM32 Nucleo board integrates the ST-LINK/V2-1 debugger and programmer. |
| |
| The STM32 Nucleo board comes with the STM32 comprehensive software HAL library together |
| with various packaged software examples. |
| |
| .. image:: img/nucleo_c031c6.jpg |
| :align: center |
| :alt: Nucleo C031C6 |
| |
| More information about the board can be found at the `Nucleo C031C6 website`_. |
| |
| Hardware |
| ******** |
| Nucleo C031C6 provides the following hardware components: |
| |
| - STM32 microcontroller in 48-pin package featuring 32 Kbytes of Flash memory |
| and 12 Kbytes of SRAM. |
| - Extension resource: |
| |
| - Arduino* Uno V3 connectivity |
| |
| - On-board ST-LINK/V2-1 debugger/programmer with SWD connector: |
| |
| - Flexible board power supply: |
| |
| - USB VBUS or external source (3.3V, 5V, 7 - 12V) |
| - Current consumption measurement (IDD) |
| |
| - Four LEDs: |
| |
| - USB communication (LD1), USB power fault LED (LD2), power LED (LD3), |
| user LED (LD4) |
| |
| - Two push-button: USER and RESET |
| |
| - USB re-enumeration capability. Three different interfaces supported on USB: |
| |
| - Virtual COM port |
| - Mass storage |
| - Debug port |
| |
| More information about STM32C031C6 can be found here: |
| `STM32C0x1 reference manual`_ |
| |
| Supported Features |
| ================== |
| |
| The Zephyr nucleo_c031c6 board configuration supports the following hardware features: |
| |
| +-----------+------------+-------------------------------------+ |
| | Interface | Controller | Driver/Component | |
| +===========+============+=====================================+ |
| | NVIC | on-chip | nested vector interrupt controller | |
| +-----------+------------+-------------------------------------+ |
| | UART | on-chip | serial port-polling; | |
| | | | serial port-interrupt | |
| +-----------+------------+-------------------------------------+ |
| | PINMUX | on-chip | pinmux | |
| +-----------+------------+-------------------------------------+ |
| | GPIO | on-chip | gpio | |
| +-----------+------------+-------------------------------------+ |
| | CLOCK | on-chip | reset and clock control | |
| +-----------+------------+-------------------------------------+ |
| | RTC | on-chip | counter | |
| +-----------+------------+-------------------------------------+ |
| | IWDG | on-chip | independent watchdog | |
| +-----------+------------+-------------------------------------+ |
| | WWDG | on-chip | window watchdog | |
| +-----------+------------+-------------------------------------+ |
| | PWM | on-chip | pwm | |
| +-----------+------------+-------------------------------------+ |
| | ADC | on-chip | ADC Controller | |
| +-----------+------------+-------------------------------------+ |
| | die-temp | on-chip | die temperature sensor | |
| +-----------+------------+-------------------------------------+ |
| | I2C | on-chip | i2c | |
| +-----------+------------+-------------------------------------+ |
| | DMA | on-chip | Direct Memory Access | |
| +-----------+------------+-------------------------------------+ |
| |
| Other hardware features are not yet supported in this Zephyr port. |
| |
| The default configuration can be found in |
| :zephyr_file:`boards/st/nucleo_c031c6/nucleo_c031c6_defconfig` |
| |
| Connections and IOs |
| =================== |
| |
| Each of the GPIO pins can be configured by software as output (push-pull or open-drain), as |
| input (with or without pull-up or pull-down), or as peripheral alternate function. Most of the |
| GPIO pins are shared with digital or analog alternate functions. All GPIOs are high current |
| capable except for analog inputs. |
| |
| Default Zephyr Peripheral Mapping: |
| ---------------------------------- |
| |
| - UART_2 TX/RX : PA2/PA3 (ST-Link Virtual Port Com) |
| - LD4 : PA5 |
| |
| For more details please refer to `STM32 Nucleo-64 board User Manual`_. |
| |
| Programming and Debugging |
| ************************* |
| |
| Applications for the ``nucleo_c031c6`` board configuration can be built and |
| flashed in the usual way (see :ref:`build_an_application` and |
| :ref:`application_run` for more details). |
| |
| Flashing |
| ======== |
| |
| Nucleo C031C6 board includes an ST-LINK/V2-1 embedded debug tool interface. |
| |
| Flashing an application to Nucleo C031C6 |
| ---------------------------------------- |
| |
| Here is an example for the :zephyr:code-sample:`blinky` application. |
| |
| .. zephyr-app-commands:: |
| :zephyr-app: samples/basic/blinky |
| :board: nucleo_c031c6 |
| :goals: build flash |
| |
| You will see the LED blinking every second. |
| |
| References |
| ********** |
| |
| .. target-notes:: |
| |
| .. _Nucleo C031C6 website: |
| https://www.st.com/en/evaluation-tools/nucleo-c031c6.html |
| |
| .. _STM32C0x1 reference manual: |
| https://www.st.com/resource/en/reference_manual/rm0490-stm32c0x1-advanced-armbased-64bit-mcus-stmicroelectronics.pdf |
| |
| .. _STM32 Nucleo-64 board User Manual: |
| https://www.st.com/resource/en/user_manual/um2953-stm32c0-nucleo64-board-mb1717-stmicroelectronics.pdf |