| /* |
| * Copyright (c) 2018, Cypress |
| * Copyright (c) 2020-2021, ATL Electronics |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <mem.h> |
| #include <zephyr/dt-bindings/gpio/gpio.h> |
| |
| #include "psoc6-pinctrl.dtsi" |
| |
| / { |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-m0+"; |
| reg = <0>; |
| }; |
| cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-m4f"; |
| reg = <1>; |
| }; |
| }; |
| |
| flash-controller@40250000 { |
| compatible = "cypress,psoc6-flash-controller"; |
| reg = <0x40250000 0x10000>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| |
| flash0: flash@10000000 { |
| compatible = "soc-nv-flash"; |
| reg = <0x10000000 DT_SIZE_K(384)>; |
| write-block-size = <4>; |
| }; |
| |
| flash1: flash@10060000 { |
| compatible = "soc-nv-flash"; |
| reg = <0x10060000 DT_SIZE_K(640)>; |
| write-block-size = <4>; |
| }; |
| }; |
| |
| sram0: memory@8000000 { |
| compatible = "mmio-sram"; |
| reg = <0x08000000 DT_SIZE_K(140)>; |
| }; |
| |
| sram1: memory@8023000 { |
| compatible = "zephyr,memory-region", "mmio-sram"; |
| reg = <0x08023000 DT_SIZE_K(4)>; |
| zephyr,memory-region = "SRAM1"; |
| }; |
| |
| sram2: memory@8024000 { |
| compatible = "zephyr,memory-region", "mmio-sram"; |
| reg = <0x08024000 DT_SIZE_K(112)>; |
| zephyr,memory-region = "SRAM2"; |
| }; |
| |
| soc { |
| pinctrl@40310000 { |
| compatible = "cypress,psoc6-pinctrl"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x40310000 0x40310000 0x2024>; |
| }; |
| |
| hsiom: hsiom@40310000 { |
| compatible = "cypress,psoc6-hsiom"; |
| reg = <0x40310000 0x2024>; |
| interrupts = <15 1>, <16 1>; |
| status = "disabled"; |
| }; |
| |
| gpio_prt0: gpio@40320000 { |
| compatible = "cypress,psoc6-gpio"; |
| reg = <0x40320000 0x80>; |
| interrupts = <0 1>; |
| gpio-controller; |
| ngpios = <6>; |
| #gpio-cells = <2>; |
| #cypress,pin-cells = <2>; |
| status = "disabled"; |
| }; |
| gpio_prt1: gpio@40320080 { |
| compatible = "cypress,psoc6-gpio"; |
| reg = <0x40320080 0x80>; |
| interrupts = <1 1>; |
| gpio-controller; |
| ngpios = <6>; |
| #gpio-cells = <2>; |
| #cypress,pin-cells = <2>; |
| status = "disabled"; |
| }; |
| gpio_prt2: gpio@40320100 { |
| compatible = "cypress,psoc6-gpio"; |
| reg = <0x40320100 0x80>; |
| interrupts = <2 1>; |
| gpio-controller; |
| ngpios = <8>; |
| #gpio-cells = <2>; |
| #cypress,pin-cells = <2>; |
| status = "disabled"; |
| }; |
| gpio_prt3: gpio@40320180 { |
| compatible = "cypress,psoc6-gpio"; |
| reg = <0x40320180 0x80>; |
| interrupts = <3 1>; |
| gpio-controller; |
| ngpios = <6>; |
| #gpio-cells = <2>; |
| #cypress,pin-cells = <2>; |
| status = "disabled"; |
| }; |
| gpio_prt4: gpio@40320200 { |
| compatible = "cypress,psoc6-gpio"; |
| reg = <0x40320200 0x80>; |
| interrupts = <4 1>; |
| gpio-controller; |
| ngpios = <4>; |
| #gpio-cells = <2>; |
| #cypress,pin-cells = <2>; |
| status = "disabled"; |
| }; |
| gpio_prt5: gpio@40320280 { |
| compatible = "cypress,psoc6-gpio"; |
| reg = <0x40320280 0x80>; |
| interrupts = <5 1>; |
| gpio-controller; |
| ngpios = <8>; |
| #gpio-cells = <2>; |
| #cypress,pin-cells = <2>; |
| status = "disabled"; |
| }; |
| gpio_prt6: gpio@40320300 { |
| compatible = "cypress,psoc6-gpio"; |
| reg = <0x40320300 0x80>; |
| interrupts = <6 1>; |
| gpio-controller; |
| ngpios = <8>; |
| #gpio-cells = <2>; |
| #cypress,pin-cells = <2>; |
| status = "disabled"; |
| }; |
| gpio_prt7: gpio@40320380 { |
| compatible = "cypress,psoc6-gpio"; |
| reg = <0x40320380 0x80>; |
| interrupts = <7 1>; |
| gpio-controller; |
| ngpios = <8>; |
| #gpio-cells = <2>; |
| #cypress,pin-cells = <2>; |
| status = "disabled"; |
| }; |
| gpio_prt8: gpio@40320400 { |
| compatible = "cypress,psoc6-gpio"; |
| reg = <0x40320400 0x80>; |
| interrupts = <8 1>; |
| gpio-controller; |
| ngpios = <8>; |
| #gpio-cells = <2>; |
| #cypress,pin-cells = <2>; |
| status = "disabled"; |
| }; |
| gpio_prt9: gpio@40320480 { |
| compatible = "cypress,psoc6-gpio"; |
| reg = <0x40320480 0x80>; |
| interrupts = <9 1>; |
| gpio-controller; |
| ngpios = <8>; |
| #gpio-cells = <2>; |
| #cypress,pin-cells = <2>; |
| status = "disabled"; |
| }; |
| gpio_prt10: gpio@40320500 { |
| compatible = "cypress,psoc6-gpio"; |
| reg = <0x40320500 0x80>; |
| interrupts = <10 1>; |
| gpio-controller; |
| ngpios = <8>; |
| #gpio-cells = <2>; |
| #cypress,pin-cells = <2>; |
| status = "disabled"; |
| }; |
| gpio_prt11: gpio@40320580 { |
| compatible = "cypress,psoc6-gpio"; |
| reg = <0x40320580 0x80>; |
| interrupts = <11 1>; |
| gpio-controller; |
| ngpios = <8>; |
| #gpio-cells = <2>; |
| #cypress,pin-cells = <2>; |
| status = "disabled"; |
| }; |
| gpio_prt12: gpio@40320600 { |
| compatible = "cypress,psoc6-gpio"; |
| reg = <0x40320600 0x80>; |
| interrupts = <12 1>; |
| gpio-controller; |
| ngpios = <8>; |
| #gpio-cells = <2>; |
| #cypress,pin-cells = <2>; |
| status = "disabled"; |
| }; |
| gpio_prt13: gpio@40320680 { |
| compatible = "cypress,psoc6-gpio"; |
| reg = <0x40320680 0x80>; |
| interrupts = <13 1>; |
| gpio-controller; |
| ngpios = <8>; |
| #gpio-cells = <2>; |
| #cypress,pin-cells = <2>; |
| status = "disabled"; |
| }; |
| gpio_prt14: gpio@40320700 { |
| compatible = "cypress,psoc6-gpio"; |
| reg = <0x40320700 0x80>; |
| interrupts = <14 1>; |
| gpio-controller; |
| ngpios = <2>; |
| #gpio-cells = <2>; |
| #cypress,pin-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| spi0: spi@40610000 { |
| compatible = "cypress,psoc6-spi"; |
| reg = <0x40610000 0x10000>; |
| interrupts = <41 6>; |
| peripheral-id = <0>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| spi1: spi@40620000 { |
| compatible = "cypress,psoc6-spi"; |
| reg = <0x40620000 0x10000>; |
| interrupts = <42 6>; |
| peripheral-id = <1>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| spi2: spi@40630000 { |
| compatible = "cypress,psoc6-spi"; |
| reg = <0x40630000 0x10000>; |
| interrupts = <43 6>; |
| peripheral-id = <2>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| spi3: spi@40640000 { |
| compatible = "cypress,psoc6-spi"; |
| reg = <0x40640000 0x10000>; |
| interrupts = <44 6>; |
| peripheral-id = <3>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| spi4: spi@40650000 { |
| compatible = "cypress,psoc6-spi"; |
| reg = <0x40650000 0x10000>; |
| interrupts = <45 6>; |
| peripheral-id = <4>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| spi5: spi@40660000 { |
| compatible = "cypress,psoc6-spi"; |
| reg = <0x40660000 0x10000>; |
| interrupts = <46 6>; |
| peripheral-id = <5>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| spi6: spi@40670000 { |
| compatible = "cypress,psoc6-spi"; |
| reg = <0x40670000 0x10000>; |
| interrupts = <47 6>; |
| peripheral-id = <6>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| spi7: spi@40680000 { |
| compatible = "cypress,psoc6-spi"; |
| reg = <0x40680000 0x10000>; |
| interrupts = <48 6>; |
| peripheral-id = <7>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| spi8: spi@40690000 { |
| compatible = "cypress,psoc6-spi"; |
| reg = <0x40690000 0x10000>; |
| interrupts = <18 6>; |
| peripheral-id = <8>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| uart0: uart@40610000 { |
| compatible = "cypress,psoc6-uart"; |
| reg = <0x40610000 0x10000>; |
| interrupts = <41 6>; |
| peripheral-id = <0>; |
| status = "disabled"; |
| }; |
| uart1: uart@40620000 { |
| compatible = "cypress,psoc6-uart"; |
| reg = <0x40620000 0x10000>; |
| interrupts = <42 6>; |
| peripheral-id = <1>; |
| status = "disabled"; |
| }; |
| uart2: uart@40630000 { |
| compatible = "cypress,psoc6-uart"; |
| reg = <0x40630000 0x10000>; |
| interrupts = <43 6>; |
| peripheral-id = <2>; |
| status = "disabled"; |
| }; |
| uart3: uart@40640000 { |
| compatible = "cypress,psoc6-uart"; |
| reg = <0x40640000 0x10000>; |
| interrupts = <44 6>; |
| peripheral-id = <3>; |
| status = "disabled"; |
| }; |
| uart4: uart@40650000 { |
| compatible = "cypress,psoc6-uart"; |
| reg = <0x40650000 0x10000>; |
| interrupts = <45 6>; |
| peripheral-id = <4>; |
| status = "disabled"; |
| }; |
| uart5: uart@40660000 { |
| compatible = "cypress,psoc6-uart"; |
| reg = <0x40660000 0x10000>; |
| interrupts = <46 6>; |
| peripheral-id = <5>; |
| status = "disabled"; |
| }; |
| uart6: uart@40670000 { |
| compatible = "cypress,psoc6-uart"; |
| reg = <0x40670000 0x10000>; |
| interrupts = <47 6>; |
| peripheral-id = <6>; |
| status = "disabled"; |
| }; |
| uart7: uart@40680000 { |
| compatible = "cypress,psoc6-uart"; |
| reg = <0x40680000 0x10000>; |
| interrupts = <48 6>; |
| peripheral-id = <7>; |
| status = "disabled"; |
| }; |
| uart8: uart@40690000 { |
| compatible = "cypress,psoc6-uart"; |
| reg = <0x40690000 0x10000>; |
| interrupts = <18 6>; |
| peripheral-id = <8>; |
| status = "disabled"; |
| }; |
| |
| uid: device_uid@16000600 { |
| compatible = "cypress,psoc6-uid"; |
| reg = <0x16000600 0xb>; |
| status = "okay"; |
| }; |
| }; |
| }; |
