| /* |
| * Copyright (c) 2020 Alexander Kozhinov <AlexanderKozhinov@yandex.com> |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <st/h7/stm32h7_dualcore.dtsi> |
| #include <zephyr/dt-bindings/display/panel.h> |
| |
| / { |
| soc { |
| compatible = "st,stm32h745", "st,stm32h7", "simple-bus"; |
| |
| flash-controller@52002000 { |
| flash0: flash@8000000 { |
| compatible = "st,stm32-nv-flash", "soc-nv-flash"; |
| write-block-size = <32>; |
| erase-block-size = <DT_SIZE_K(128)>; |
| /* maximum erase time for a 128K sector */ |
| max-erase-time = <4000>; |
| }; |
| flash1: flash@8100000 { |
| compatible = "st,stm32-nv-flash", "soc-nv-flash"; |
| write-block-size = <32>; |
| erase-block-size = <DT_SIZE_K(128)>; |
| /* maximum erase time for a 128K sector */ |
| max-erase-time = <4000>; |
| }; |
| }; |
| |
| dmamux1: dmamux@40020800 { |
| dma-requests= <107>; |
| }; |
| |
| dmamux2: dmamux@58025800 { |
| dma-requests= <107>; |
| }; |
| |
| ltdc: display-controller@50001000 { |
| compatible = "st,stm32-ltdc"; |
| reg = <0x50001000 0x200>; |
| interrupts = <88 0>, <89 0>; |
| interrupt-names = "ltdc", "ltdc_er"; |
| clocks = <&rcc STM32_CLOCK_BUS_APB3 0x00000008>; |
| status = "disabled"; |
| }; |
| |
| usbotg_hs: usb@40040000 { |
| compatible = "st,stm32-otghs"; |
| reg = <0x40040000 0x40000>; |
| interrupts = <74 0>, <75 0>, <76 0>, <77 0>; |
| interrupt-names = "ep1_out", "ep1_in", "wkup", "otghs"; |
| num-bidir-endpoints = <9>; |
| ram-size = <4096>; |
| maximum-speed = "full-speed"; |
| clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x02000000>, |
| <&rcc STM32_SRC_HSI48 USB_SEL(3)>; |
| phys = <&otghs_fs_phy>; |
| status = "disabled"; |
| }; |
| |
| usbotg_fs: usb@40080000 { |
| compatible = "st,stm32-otgfs"; |
| reg = <0x40080000 0x40000>; |
| interrupts = <98 0>, <99 0>, <100 0>, <101 0>; |
| interrupt-names = "ep1_out", "ep1_in", "wkup", "otgfs"; |
| num-bidir-endpoints = <9>; |
| ram-size = <4096>; |
| maximum-speed = "full-speed"; |
| clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x08000000>, |
| <&rcc STM32_SRC_HSI48 USB_SEL(3)>; |
| phys = <&otghs_fs_phy>; |
| status = "disabled"; |
| }; |
| |
| rtc@58004000 { |
| bbram: backup_regs { |
| compatible = "st,stm32-bbram"; |
| st,backup-regs = <32>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| /* |
| * The RAM memories placed here can be used by both cores M4/M7 |
| * For more information see reference manual and datasheet to STM32H745 |
| * (RM0399 Rev 3) |
| */ |
| |
| /* System data RAM accessible over AXI bus: AXI SRAM in D1 domain */ |
| sram0: memory@24000000 { |
| reg = <0x24000000 DT_SIZE_K(512)>; |
| compatible = "mmio-sram"; |
| }; |
| |
| /* System data RAM accessible over AHB bus: SRAM1 in D2 domain */ |
| sram1: memory@30000000 { |
| reg = <0x30000000 DT_SIZE_K(128)>; |
| compatible = "zephyr,memory-region", "mmio-sram"; |
| zephyr,memory-region = "SRAM1"; |
| }; |
| |
| /* System data RAM accessible over AHB bus: SRAM2 in D2 domain */ |
| sram2: memory@30020000 { |
| compatible = "zephyr,memory-region", "mmio-sram"; |
| reg = <0x30020000 DT_SIZE_K(128)>; |
| zephyr,memory-region = "SRAM2"; |
| }; |
| |
| /* System data RAM accessible over AHB bus: SRAM3 in D2 domain */ |
| sram3: memory@30040000 { |
| compatible = "zephyr,memory-region", "mmio-sram"; |
| reg = <0x30040000 DT_SIZE_K(32)>; |
| zephyr,memory-region = "SRAM3"; |
| }; |
| |
| /* System data RAM accessible over AHB bus: SRAM4 in D3 domain */ |
| sram4: memory@38000000 { |
| reg = <0x38000000 DT_SIZE_K(64)>; |
| compatible = "zephyr,memory-region", "mmio-sram"; |
| zephyr,memory-region = "SRAM4"; |
| }; |
| |
| otghs_fs_phy: otghs_fs_phy { |
| compatible = "usb-nop-xceiv"; |
| #phy-cells = <0>; |
| }; |
| |
| vref: vref { |
| io-channels = <&adc3 19>; |
| }; |
| |
| vbat: vbat { |
| io-channels = <&adc3 17>; |
| }; |
| }; |