| .. _bcm958401m2: |
| |
| Broadcom BCM958401M2 |
| #################### |
| |
| Overview |
| ******** |
| The Broadcom BCM958401M2 board utilizes the Valkyrie BCM58400 SoC to |
| provide support for PCIe offload engine functionality. |
| |
| Hardware |
| ******** |
| The BCM958401M2 is a PCIe card with the following physical features: |
| |
| * PCIe Gen3 interface |
| * RS232 UART (optionally populated) |
| * JTAG (optionally populated) |
| |
| Supported Features |
| ================== |
| The Broadcom BCM958401M2 board configuration supports the following hardware |
| features: |
| |
| +-----------+------------+--------------------------------------+ |
| | Interface | Controller | Driver/Component | |
| +===========+============+======================================+ |
| | NVIC | on-chip | nested vectored interrupt controller | |
| +-----------+------------+--------------------------------------+ |
| | UART | on-chip | serial port | |
| +-----------+------------+--------------------------------------+ |
| |
| Other hardware features are not supported by the Zephyr kernel. |
| |
| The default configuration can be found in the defconfig file: |
| |
| ``boards/arm/bcm958401m2/bcm958401m2_defconfig`` |
| |
| Connections and IOs |
| =================== |
| |
| |
| Programming and Debugging |
| ************************* |
| |
| Flashing |
| ======== |
| |
| The flash on board is not supported by Zephyr at this time. |
| Board is booted over PCIe interface. |
| |
| Debugging |
| ========= |
| The bcm958401m2 board includes pads for soldering a JTAG connector. |
| Zephyr applications running on the M7 core can also be tested by observing UART console output. |
| |
| |
| References |
| ********** |
