boards/arm/twr_kv58f220m/twr_kv58f220m.dts

/*
 * Copyright (c) 2019 SEAL AG
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/dts-v1/;

#include <nxp/MKV58F1M0VLQ24.dtsi>

/ {
	model = "NXP Kinetis KV58 MCU Tower System Module";
	compatible = "nxp,mkv58f24", "nxp,kv58", "nxp,kv5x";

	aliases {
		led0 = &red_led;
		led1 = &green_led;
		led2 = &blue_led;
		led3 = &orange_led;
		sw0 = &user_button_0;
		sw1 = &user_button_1;
		sw2 = &user_button_2;
		sw3 = &user_button_3;
	};

	chosen {
		zephyr,sram = &sram0;
		zephyr,flash = &flash0;
		zephyr,code-partition = &slot0_partition;
		zephyr,console = &uart0;
		zephyr,shell-uart = &uart0;
		zephyr,uart-pipe = &uart0;
	};

	leds {
		compatible = "gpio-leds";
		red_led: led_0 {
			gpios = <&gpioe 11 0>;
			label = "User LED D4";
		};
		green_led: led_1 {
			gpios = <&gpioe 12 0>;
			label = "User LED D3";
		};
		blue_led: led_2 {
			gpios = <&gpioe 29 0>;
			label = "User LED D2";
		};
		orange_led: led_3 {
			gpios = <&gpioe 30 0>;
			label = "User LED D1";
		};
	};

	gpio_keys {
		compatible = "gpio-keys";
		user_button_0: button_0 {
			label = "User SW2";
			gpios = <&gpioa 4 GPIO_ACTIVE_LOW>;
		};
		user_button_1: button_1 {
			label = "User SW3";
			gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
		};
		user_button_2: button_2 {
			label = "User SW4";
			gpios = <&gpiob 5 GPIO_ACTIVE_LOW>;
		};
		user_button_3: button_3 {
			label = "User SW5";
			gpios = <&gpiob 4 GPIO_ACTIVE_LOW>;
		};
	};
};

&sim {
	pllfll-select = <KINETIS_SIM_PLLFLLSEL_MCGPLLCLK>;
	er32k-select = <KINETIS_SIM_ER32KSEL_OSC32KCLK>;
};


&gpioa {
	status = "okay";
};

&gpiob {
	status = "okay";
};

&gpioc {
	status = "okay";
};

&gpiod {
	status = "okay";
};

&gpioe {
	status = "okay";
};

&flash0 {

	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		boot_partition: partition@0 {
			label = "mcuboot";
			reg = <0x00000000 0x10000>;
		};
		storage_partition: partition@10000 {
			label = "storage";
			reg = <0x00010000 0x10000>;
		};
		slot0_partition: partition@20000 {
			label = "image-0";
			reg = <0x00020000 0x60000>;
		};
		slot1_partition: partition@80000 {
			label = "image-1";
			reg = <0x00080000 0x60000>;
		};
		scratch_partition: partition@e0000 {
			label = "image-scratch";
			reg = <0x000e0000 0x20000>;
		};
	};
};

&i2c1 {
	status = "okay";
	pinctrl-0 = <&I2C1_SCL_PTD8 &I2C1_SDA_PTD9>;

	fxos8700@1c {
		compatible = "nxp,fxos8700";
		reg = <0x1c>;
		label = "FXOS8700";
		int1-gpios = <&gpioc 18 GPIO_ACTIVE_LOW>;
		int2-gpios = <&gpioc 19 GPIO_ACTIVE_LOW>;
	};
};

&I2C1_SCL_PTD8 {
	drive-open-drain;
};

&I2C1_SDA_PTD9 {
	drive-open-drain;
};

&uart0 {
	status = "okay";
	current-speed = <115200>;
	pinctrl-0 = <&UART0_RX_PTB0 &UART0_TX_PTB1>;
};