| # Copyright (c) 2021 Arm Limited (or its affiliates). All rights reserved. |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| set(SUPPORTED_EMU_PLATFORMS armfvp) |
| set(ARMFVP_BIN_NAME FVP_BaseR_AEMv8R) |
| set(ARMFVP_MIN_VERSION 11.16.16) |
| |
| if(CONFIG_BOARD_FVP_BASER_AEMV8R_FVP_AEMV8R_AARCH64 OR |
| CONFIG_BOARD_FVP_BASER_AEMV8R_FVP_AEMV8R_AARCH64_SMP) |
| set(ARMFVP_FLAGS |
| -C cluster0.has_aarch64=1 |
| -C cluster0.VMSA_supported=0 |
| -C cluster0.NUM_CORES=${CONFIG_MP_MAX_NUM_CPUS} |
| -C cluster0.gicv3.cpuintf-mmap-access-level=2 |
| -C cluster0.gicv3.SRE-enable-action-on-mmap=2 |
| -C cluster0.gicv3.SRE-EL2-enable-RAO=1 |
| -C cluster0.gicv3.extended-interrupt-range-support=1 |
| -C gic_distributor.GICD_CTLR-DS-1-means-secure-only=1 |
| -C gic_distributor.has-two-security-states=0 |
| -C bp.refcounter.non_arch_start_at_default=1 |
| # UART0 config |
| -C bp.pl011_uart0.out_file=- |
| -C bp.pl011_uart0.unbuffered_output=1 |
| -C bp.terminal_0.start_telnet=0 |
| # UART1 config |
| -C bp.pl011_uart1.out_file=- |
| -C bp.pl011_uart1.unbuffered_output=1 |
| -C bp.terminal_1.start_telnet=0 |
| # UART2 config |
| -C bp.pl011_uart2.out_file=- |
| -C bp.pl011_uart2.unbuffered_output=1 |
| -C bp.terminal_2.start_telnet=0 |
| # UART3 config |
| -C bp.pl011_uart3.out_file=- |
| -C bp.pl011_uart3.unbuffered_output=1 |
| -C bp.terminal_3.start_telnet=0 |
| |
| -C bp.vis.disable_visualisation=1 |
| -C bp.vis.rate_limit-enable=0 |
| -C cache_state_modelled=1 |
| ) |
| elseif(CONFIG_BOARD_FVP_BASER_AEMV8R_FVP_AEMV8R_AARCH32 OR |
| CONFIG_BOARD_FVP_BASER_AEMV8R_FVP_AEMV8R_AARCH32_SMP) |
| set(ARMFVP_FLAGS |
| -C cluster0.has_aarch64=0 |
| -C cluster0.VMSA_supported=0 |
| -C cluster0.NUM_CORES=${CONFIG_MP_MAX_NUM_CPUS} |
| -C cluster0.gicv3.cpuintf-mmap-access-level=2 |
| -C cluster0.gicv3.SRE-enable-action-on-mmap=2 |
| -C cluster0.gicv3.SRE-EL2-enable-RAO=1 |
| -C cluster0.gicv3.extended-interrupt-range-support=1 |
| -C gic_distributor.GICD_CTLR-DS-1-means-secure-only=1 |
| -C gic_distributor.has-two-security-states=0 |
| -C bp.refcounter.non_arch_start_at_default=1 |
| # UART0 config |
| -C bp.pl011_uart0.out_file=- |
| -C bp.pl011_uart0.unbuffered_output=1 |
| -C bp.terminal_0.start_telnet=0 |
| # UART1 config |
| -C bp.pl011_uart1.out_file=- |
| -C bp.pl011_uart1.unbuffered_output=1 |
| -C bp.terminal_1.start_telnet=0 |
| # UART2 config |
| -C bp.pl011_uart2.out_file=- |
| -C bp.pl011_uart2.unbuffered_output=1 |
| -C bp.terminal_2.start_telnet=0 |
| # UART3 config |
| -C bp.pl011_uart3.out_file=- |
| -C bp.pl011_uart3.unbuffered_output=1 |
| -C bp.terminal_3.start_telnet=0 |
| |
| -C bp.vis.disable_visualisation=1 |
| -C bp.vis.rate_limit-enable=0 |
| -C cache_state_modelled=0 |
| ) |
| endif() |
