| description: TI LP5562 LED |
| |
| compatible: "ti,lp5562" |
| |
| include: i2c-device.yaml |
| |
| properties: |
| red-output-current: |
| type: int |
| default: 175 |
| description: Output current of red channel in 0.1 mA (0-25.5 mA). |
| Default value is the power-on default. Valid range = 0 - 255 |
| green-output-current: |
| type: int |
| default: 175 |
| description: Output current of green channel in 0.1 mA (0-25.5 mA) |
| Default value is the power-on default. Valid range = 0 - 255 |
| blue-output-current: |
| type: int |
| default: 175 |
| description: Output current of blue channel in 0.1 mA (0-25.5 mA) |
| Default value is the power-on default. Valid range = 0 - 255 |
| white-output-current: |
| type: int |
| default: 175 |
| description: Output current of white channel in 0.1 mA (0-25.5 mA) |
| Default value is the power-on default. Valid range = 0 - 255 |
| |
| enable-gpios: |
| type: phandle-array |
| description: | |
| GPIO to enable LP5562 (both Charge-pump and Digital Communications interface). |
| If not provided, user must ensure enable pin is already asserted externally (e.g: |
| pull-up resistor). |
