drivers/gpio/gpio_andes_atcgpio100.c - third_party/github/zephyrproject-rtos/zephyr - Git at Google

 /*
  * Copyright (c) 2021 Andes Technology Corporation
  *
  * SPDX-License-Identifier: Apache-2.0
  */

 /**
  * @file GPIO driver for the AndesTech ATCGPIO100 controller
  */

 #include <errno.h>
 #include <stdbool.h>
 #include <zephyr/kernel.h>
 #include <zephyr/device.h>
 #include <soc.h>
 #include <zephyr/drivers/gpio.h>
 #include <zephyr/dt-bindings/gpio/andestech-atcgpio100.h>
 #include <zephyr/sys/util.h>
 #include <zephyr/sys/sys_io.h>
 #include <zephyr/irq.h>

 #include <zephyr/drivers/gpio/gpio_utils.h>

 #define DT_DRV_COMPAT andestech_atcgpio100

 /* Andes ATCGPIO100 register definition */
 #define REG_IDR  0x00 /* ID and Revision reg.           */
 #define REG_CFG  0x10 /* Hardware configure reg.        */
 #define REG_DIN  0x20 /* Data In reg.                   */
 #define REG_DOUT 0x24 /* Data Out reg.                  */
 #define REG_DIR  0x28 /* Channel direction reg.         */
 #define REG_DCLR 0x2C /* Data out clear reg.            */
 #define REG_DSET 0x30 /* Data out set reg.              */
 #define REG_PUEN 0x40 /* Pull enable reg.               */
 #define REG_PTYP 0x44 /* Pull type reg.                 */
 #define REG_INTE 0x50 /* Interrupt enable reg.          */
 #define REG_IMD0 0x54 /* Interrupt mode 0 ~ 7 reg.      */
 #define REG_IMD1 0x58 /* Interrupt mode 8 ~ 15 reg.     */
 #define REG_IMD2 0x5C /* Interrupt mode 16 ~ 23 reg.    */
 #define REG_IMD3 0x60 /* Interrupt mode 24 ~ 31 reg.    */
 #define REG_ISTA 0x64 /* Interrupt status reg.          */
 #define REG_DEBE 0x70 /* De-bounce enable reg.          */
 #define REG_DEBC 0x74 /* De-Bounce control reg.         */

 #define INT_NO_OPERATION        0x0
 #define INT_HIGH_LEVEL          0x2
 #define INT_LOW_LEVEL           0x3
 #define INT_NEGATIVE_EDGE       0x5
 #define INT_POSITIVE_EDGE       0x6
 #define INT_DUAL_EDGE           0x7

 #define PULL_CONFIGURED         BIT(31)
 #define DEBOUNCE_CONFIGURED     BIT(29)
 #define DF_DEBOUNCED_SETTING    (0x80000003)

 #define GPIO_BASE(dev) \
 	((const struct gpio_atcgpio100_config * const)(dev)->config)->base

 #define GPIO_CFG(dev)  (GPIO_BASE(dev) + REG_CFG)
 #define GPIO_DIR(dev)  (GPIO_BASE(dev) + REG_DIR)
 #define GPIO_DIN(dev)  (GPIO_BASE(dev) + REG_DIN)
 #define GPIO_DOUT(dev) (GPIO_BASE(dev) + REG_DOUT)
 #define GPIO_DCLR(dev) (GPIO_BASE(dev) + REG_DCLR)
 #define GPIO_DSET(dev) (GPIO_BASE(dev) + REG_DSET)
 #define GPIO_PUEN(dev) (GPIO_BASE(dev) + REG_PUEN)
 #define GPIO_PTYP(dev) (GPIO_BASE(dev) + REG_PTYP)
 #define GPIO_INTE(dev) (GPIO_BASE(dev) + REG_INTE)
 #define GPIO_IMD(dev, idx) (GPIO_BASE(dev) + REG_IMD0 + (idx * 4))
 #define GPIO_ISTA(dev) (GPIO_BASE(dev) + REG_ISTA)
 #define GPIO_DEBE(dev) (GPIO_BASE(dev) + REG_DEBE)
 #define GPIO_DEBC(dev) (GPIO_BASE(dev) + REG_DEBC)

 #define INWORD(x)     sys_read32(x)
 #define OUTWORD(x, d) sys_write32(d, x)

 #define SET_GPIO_INT_MODE(cur_val, mode, ch_idx)			\
 		do {							\
 			cur_val &= ~(BIT_MASK(3) << (ch_idx * 4));	\
 			cur_val |=  (mode << (ch_idx * 4));		\
 		} while (false)


 typedef void (*atcgpio100_cfg_func_t)(void);

 struct gpio_atcgpio100_config {
 	/* gpio_driver_config needs to be first */
 	struct gpio_driver_config common;
 	uint32_t                  base;
 	uint32_t                  irq_num;
 	atcgpio100_cfg_func_t     cfg_func;
 };

 struct gpio_atcgpio100_data {
 	/* gpio_driver_data needs to be first */
 	struct gpio_driver_data common;
 	/* list of callbacks */
 	sys_slist_t cb;
 	struct k_spinlock lock;
 };

 static int gpio_atcgpio100_config(const struct device *port,
 				  gpio_pin_t pin,
 				  gpio_flags_t flags)
 {
 	struct gpio_atcgpio100_data * const data = port->data;
 	uint32_t port_value, pin_mask, io_flags;
 	k_spinlock_key_t key;

 	/* Does not support disconnected pin, and
 	 * not supporting both input/output at same time.
 	 */
 	io_flags = flags & (GPIO_INPUT | GPIO_OUTPUT);
 	if ((io_flags == GPIO_DISCONNECTED)
 	    || (io_flags == (GPIO_INPUT | GPIO_OUTPUT))) {
 		return -ENOTSUP;
 	}

 	pin_mask = BIT(pin);

 	if (flags & GPIO_OUTPUT) {

 		if (flags & GPIO_OUTPUT_INIT_HIGH) {
 			OUTWORD(GPIO_DSET(port), pin_mask);
 		} else if (flags & GPIO_OUTPUT_INIT_LOW) {
 			OUTWORD(GPIO_DCLR(port), pin_mask);
 		}

 		key = k_spin_lock(&data->lock);

 		/* Set channel output */
 		port_value = INWORD(GPIO_DIR(port));
 		OUTWORD(GPIO_DIR(port), port_value | pin_mask);

 		k_spin_unlock(&data->lock, key);

 	} else if (flags & GPIO_INPUT) {

 		if (flags & (GPIO_PULL_UP | GPIO_PULL_DOWN)) {
 			return -ENOTSUP;
 		}

 		key = k_spin_lock(&data->lock);

 		/* Set de-bounce */
 		if (flags & ATCGPIO100_GPIO_DEBOUNCE) {
 			/* Default settings: Filter out pulses which are
 			 *  less than 4 de-bounce clock period
 			 */
 			OUTWORD(GPIO_DEBC(port), DF_DEBOUNCED_SETTING);
 			port_value = INWORD(GPIO_DEBE(port));
 			OUTWORD(GPIO_DEBE(port), port_value | pin_mask);
 		}

 		/* Set channel input */
 		port_value = INWORD(GPIO_DIR(port));
 		OUTWORD(GPIO_DIR(port), port_value & ~pin_mask);

 		k_spin_unlock(&data->lock, key);

 	} else {
 		return -ENOTSUP;
 	}

 	return 0;
 }

 static int gpio_atcgpio100_port_get_raw(const struct device *port,
 					gpio_port_value_t *value)
 {
 	*value = INWORD(GPIO_DIN(port));
 	return 0;
 }

 static int gpio_atcgpio100_set_masked_raw(const struct device *port,
 					  gpio_port_pins_t mask,
 					  gpio_port_value_t value)
 {
 	struct gpio_atcgpio100_data * const data = port->data;
 	uint32_t port_value;

 	k_spinlock_key_t key = k_spin_lock(&data->lock);

 	port_value = INWORD(GPIO_DOUT(port));
 	OUTWORD(GPIO_DOUT(port), (port_value & ~mask) | (value & mask));

 	k_spin_unlock(&data->lock, key);

 	return 0;
 }

 static int gpio_atcgpio100_set_bits_raw(const struct device *port,
 					gpio_port_pins_t pins)
 {
 	OUTWORD(GPIO_DSET(port), pins);
 	return 0;
 }

 static int gpio_atcgpio100_clear_bits_raw(const struct device *port,
 					gpio_port_pins_t pins)
 {
 	OUTWORD(GPIO_DCLR(port), pins);
 	return 0;
 }

 static int gpio_atcgpio100_toggle_bits(const struct device *port,
 					gpio_port_pins_t pins)
 {
 	struct gpio_atcgpio100_data * const data = port->data;
 	uint32_t port_value;

 	k_spinlock_key_t key = k_spin_lock(&data->lock);

 	port_value = INWORD(GPIO_DOUT(port));
 	OUTWORD(GPIO_DOUT(port), port_value ^ pins);

 	k_spin_unlock(&data->lock, key);

 	return 0;
 }

 static int gpio_atcgpio100_pin_interrupt_configure(
 					const struct device *port,
 					gpio_pin_t pin,
 					enum gpio_int_mode mode,
 					enum gpio_int_trig trig)
 {
 	struct gpio_atcgpio100_data * const data = port->data;
 	uint32_t port_value, int_mode, imr_idx, ch_idx;
 	k_spinlock_key_t key;

 	switch (mode | trig) {
 	case GPIO_INT_EDGE_BOTH:
 		int_mode = INT_DUAL_EDGE;
 		break;
 	case GPIO_INT_EDGE_RISING:
 		int_mode = INT_POSITIVE_EDGE;
 		break;
 	case GPIO_INT_EDGE_FALLING:
 		int_mode = INT_NEGATIVE_EDGE;
 		break;
 	case GPIO_INT_LEVEL_LOW:
 		int_mode = INT_LOW_LEVEL;
 		break;
 	case GPIO_INT_LEVEL_HIGH:
 		int_mode = INT_HIGH_LEVEL;
 		break;
 	default:
 		int_mode = INT_NO_OPERATION;
 		break;
 	}

 	imr_idx = (pin / 8);
 	ch_idx = (pin % 8);

 	key = k_spin_lock(&data->lock);

 	if (int_mode == INT_NO_OPERATION) {
 		/* Disable interrupt of pin */
 		port_value = INWORD(GPIO_INTE(port));
 		OUTWORD(GPIO_INTE(port), port_value & ~BIT(pin));

 		/* Clear the remain pending interrupt */
 		port_value = INWORD(GPIO_ISTA(port));
 		OUTWORD(GPIO_ISTA(port), port_value);
 	} else {
 		/* Set interrupt mode of pin */
 		port_value = INWORD(GPIO_IMD(port, imr_idx));
 		SET_GPIO_INT_MODE(port_value, int_mode, ch_idx);
 		OUTWORD(GPIO_IMD(port, imr_idx), port_value);

 		/* Enable interrupt of pin */
 		port_value = INWORD(GPIO_INTE(port));
 		OUTWORD(GPIO_INTE(port), port_value | BIT(pin));
 	}

 	k_spin_unlock(&data->lock, key);

 	return 0;
 }

 static int gpio_atcgpio100_manage_callback(const struct device *port,
 					struct gpio_callback *callback,
 					bool set)
 {

 	struct gpio_atcgpio100_data * const data = port->data;

 	return gpio_manage_callback(&data->cb, callback, set);
 }

 static void gpio_atcgpio100_irq_handler(const struct device *port)
 {
 	struct gpio_atcgpio100_data * const data = port->data;
 	uint32_t port_value;

 	port_value = INWORD(GPIO_ISTA(port));
 	OUTWORD(GPIO_ISTA(port), port_value);

 	gpio_fire_callbacks(&data->cb, port, port_value);

 }

 static const struct gpio_driver_api gpio_atcgpio100_api = {
 	.pin_configure           = gpio_atcgpio100_config,
 	.port_get_raw            = gpio_atcgpio100_port_get_raw,
 	.port_set_masked_raw     = gpio_atcgpio100_set_masked_raw,
 	.port_set_bits_raw       = gpio_atcgpio100_set_bits_raw,
 	.port_clear_bits_raw     = gpio_atcgpio100_clear_bits_raw,
 	.port_toggle_bits        = gpio_atcgpio100_toggle_bits,
 	.pin_interrupt_configure = gpio_atcgpio100_pin_interrupt_configure,
 	.manage_callback         = gpio_atcgpio100_manage_callback
 };

 static int gpio_atcgpio100_init(const struct device *port)
 {
 	const struct gpio_atcgpio100_config * const dev_cfg = port->config;

 	/* Disable all interrupts */
 	OUTWORD(GPIO_INTE(port), BIT_MASK(0));

 	/* Write 1 to clear interrupt status */
 	OUTWORD(GPIO_ISTA(port), (uint32_t) BIT64_MASK(32));

 	/* Configure GPIO device */
 	dev_cfg->cfg_func();

 	/* Enable PLIC interrupt GPIO source */
 	irq_enable(dev_cfg->irq_num);

 	return 0;
 }

 #define GPIO_ATCGPIO100_INIT(n)						\
 	static void gpio_atcgpio100_cfg_func_##n(void);			\
 	static struct gpio_atcgpio100_data gpio_atcgpio100_data_##n;	\
 									\
 	static const struct gpio_atcgpio100_config			\
 		gpio_atcgpio100_config_##n = {				\
 			.common = {					\
 				.port_pin_mask =			\
 				GPIO_PORT_PIN_MASK_FROM_DT_INST(n),	\
 			},						\
 			.base = DT_INST_REG_ADDR(n),			\
 			.irq_num = DT_INST_IRQN(n),			\
 			.cfg_func = gpio_atcgpio100_cfg_func_##n	\
 		};							\
 									\
 	DEVICE_DT_INST_DEFINE(n,			                \
 		gpio_atcgpio100_init,					\
 		NULL,							\
 		&gpio_atcgpio100_data_##n,				\
 		&gpio_atcgpio100_config_##n,				\
 		PRE_KERNEL_1,						\
 		CONFIG_GPIO_INIT_PRIORITY,				\
 		&gpio_atcgpio100_api);					\
 									\
 	static void gpio_atcgpio100_cfg_func_##n(void)			\
 	{								\
 		IRQ_CONNECT(DT_INST_IRQN(n),				\
 			    DT_INST_IRQ(n, priority),			\
 			    gpio_atcgpio100_irq_handler,		\
 			    DEVICE_DT_INST_GET(n),	                \
 			    0);						\
 		return;							\
 	}								\


 DT_INST_FOREACH_STATUS_OKAY(GPIO_ATCGPIO100_INIT)
	/*
	* Copyright (c) 2021 Andes Technology Corporation
	*
	* SPDX-License-Identifier: Apache-2.0
	*/

	/**
	* @file GPIO driver for the AndesTech ATCGPIO100 controller
	*/

	#include <errno.h>
	#include <stdbool.h>
	#include <zephyr/kernel.h>
	#include <zephyr/device.h>
	#include <soc.h>
	#include <zephyr/drivers/gpio.h>
	#include <zephyr/dt-bindings/gpio/andestech-atcgpio100.h>
	#include <zephyr/sys/util.h>
	#include <zephyr/sys/sys_io.h>
	#include <zephyr/irq.h>

	#include <zephyr/drivers/gpio/gpio_utils.h>

	#define DT_DRV_COMPAT andestech_atcgpio100

	/* Andes ATCGPIO100 register definition */
	#define REG_IDR 0x00 /* ID and Revision reg. */
	#define REG_CFG 0x10 /* Hardware configure reg. */
	#define REG_DIN 0x20 /* Data In reg. */
	#define REG_DOUT 0x24 /* Data Out reg. */
	#define REG_DIR 0x28 /* Channel direction reg. */
	#define REG_DCLR 0x2C /* Data out clear reg. */
	#define REG_DSET 0x30 /* Data out set reg. */
	#define REG_PUEN 0x40 /* Pull enable reg. */
	#define REG_PTYP 0x44 /* Pull type reg. */
	#define REG_INTE 0x50 /* Interrupt enable reg. */
	#define REG_IMD0 0x54 /* Interrupt mode 0 ~ 7 reg. */
	#define REG_IMD1 0x58 /* Interrupt mode 8 ~ 15 reg. */
	#define REG_IMD2 0x5C /* Interrupt mode 16 ~ 23 reg. */
	#define REG_IMD3 0x60 /* Interrupt mode 24 ~ 31 reg. */
	#define REG_ISTA 0x64 /* Interrupt status reg. */
	#define REG_DEBE 0x70 /* De-bounce enable reg. */
	#define REG_DEBC 0x74 /* De-Bounce control reg. */

	#define INT_NO_OPERATION 0x0
	#define INT_HIGH_LEVEL 0x2
	#define INT_LOW_LEVEL 0x3
	#define INT_NEGATIVE_EDGE 0x5
	#define INT_POSITIVE_EDGE 0x6
	#define INT_DUAL_EDGE 0x7

	#define PULL_CONFIGURED BIT(31)
	#define DEBOUNCE_CONFIGURED BIT(29)
	#define DF_DEBOUNCED_SETTING (0x80000003)

	#define GPIO_BASE(dev) \
	((const struct gpio_atcgpio100_config * const)(dev)->config)->base

	#define GPIO_CFG(dev) (GPIO_BASE(dev) + REG_CFG)
	#define GPIO_DIR(dev) (GPIO_BASE(dev) + REG_DIR)
	#define GPIO_DIN(dev) (GPIO_BASE(dev) + REG_DIN)
	#define GPIO_DOUT(dev) (GPIO_BASE(dev) + REG_DOUT)
	#define GPIO_DCLR(dev) (GPIO_BASE(dev) + REG_DCLR)
	#define GPIO_DSET(dev) (GPIO_BASE(dev) + REG_DSET)
	#define GPIO_PUEN(dev) (GPIO_BASE(dev) + REG_PUEN)
	#define GPIO_PTYP(dev) (GPIO_BASE(dev) + REG_PTYP)
	#define GPIO_INTE(dev) (GPIO_BASE(dev) + REG_INTE)
	#define GPIO_IMD(dev, idx) (GPIO_BASE(dev) + REG_IMD0 + (idx * 4))
	#define GPIO_ISTA(dev) (GPIO_BASE(dev) + REG_ISTA)
	#define GPIO_DEBE(dev) (GPIO_BASE(dev) + REG_DEBE)
	#define GPIO_DEBC(dev) (GPIO_BASE(dev) + REG_DEBC)

	#define INWORD(x) sys_read32(x)
	#define OUTWORD(x, d) sys_write32(d, x)

	#define SET_GPIO_INT_MODE(cur_val, mode, ch_idx) \
	do { \
	cur_val &= ~(BIT_MASK(3) << (ch_idx * 4)); \
	cur_val \|= (mode << (ch_idx * 4)); \
	} while (false)


	typedef void (*atcgpio100_cfg_func_t)(void);

	struct gpio_atcgpio100_config {
	/* gpio_driver_config needs to be first */
	struct gpio_driver_config common;
	uint32_t base;
	uint32_t irq_num;
	atcgpio100_cfg_func_t cfg_func;
	};

	struct gpio_atcgpio100_data {
	/* gpio_driver_data needs to be first */
	struct gpio_driver_data common;
	/* list of callbacks */
	sys_slist_t cb;
	struct k_spinlock lock;
	};

	static int gpio_atcgpio100_config(const struct device *port,
	gpio_pin_t pin,
	gpio_flags_t flags)
	{
	struct gpio_atcgpio100_data * const data = port->data;
	uint32_t port_value, pin_mask, io_flags;
	k_spinlock_key_t key;

	/* Does not support disconnected pin, and
	* not supporting both input/output at same time.
	*/
	io_flags = flags & (GPIO_INPUT \| GPIO_OUTPUT);
	if ((io_flags == GPIO_DISCONNECTED)
	\|\| (io_flags == (GPIO_INPUT \| GPIO_OUTPUT))) {
	return -ENOTSUP;
	}

	pin_mask = BIT(pin);

	if (flags & GPIO_OUTPUT) {

	if (flags & GPIO_OUTPUT_INIT_HIGH) {
	OUTWORD(GPIO_DSET(port), pin_mask);
	} else if (flags & GPIO_OUTPUT_INIT_LOW) {
	OUTWORD(GPIO_DCLR(port), pin_mask);
	}

	key = k_spin_lock(&data->lock);

	/* Set channel output */
	port_value = INWORD(GPIO_DIR(port));
	OUTWORD(GPIO_DIR(port), port_value \| pin_mask);

	k_spin_unlock(&data->lock, key);

	} else if (flags & GPIO_INPUT) {

	if (flags & (GPIO_PULL_UP \| GPIO_PULL_DOWN)) {
	return -ENOTSUP;
	}

	key = k_spin_lock(&data->lock);

	/* Set de-bounce */
	if (flags & ATCGPIO100_GPIO_DEBOUNCE) {
	/* Default settings: Filter out pulses which are
	* less than 4 de-bounce clock period
	*/
	OUTWORD(GPIO_DEBC(port), DF_DEBOUNCED_SETTING);
	port_value = INWORD(GPIO_DEBE(port));
	OUTWORD(GPIO_DEBE(port), port_value \| pin_mask);
	}

	/* Set channel input */
	port_value = INWORD(GPIO_DIR(port));
	OUTWORD(GPIO_DIR(port), port_value & ~pin_mask);

	k_spin_unlock(&data->lock, key);

	} else {
	return -ENOTSUP;
	}

	return 0;
	}

	static int gpio_atcgpio100_port_get_raw(const struct device *port,
	gpio_port_value_t *value)
	{
	*value = INWORD(GPIO_DIN(port));
	return 0;
	}

	static int gpio_atcgpio100_set_masked_raw(const struct device *port,
	gpio_port_pins_t mask,
	gpio_port_value_t value)
	{
	struct gpio_atcgpio100_data * const data = port->data;
	uint32_t port_value;

	k_spinlock_key_t key = k_spin_lock(&data->lock);

	port_value = INWORD(GPIO_DOUT(port));
	OUTWORD(GPIO_DOUT(port), (port_value & ~mask) \| (value & mask));

	k_spin_unlock(&data->lock, key);

	return 0;
	}

	static int gpio_atcgpio100_set_bits_raw(const struct device *port,
	gpio_port_pins_t pins)
	{
	OUTWORD(GPIO_DSET(port), pins);
	return 0;
	}

	static int gpio_atcgpio100_clear_bits_raw(const struct device *port,
	gpio_port_pins_t pins)
	{
	OUTWORD(GPIO_DCLR(port), pins);
	return 0;
	}

	static int gpio_atcgpio100_toggle_bits(const struct device *port,
	gpio_port_pins_t pins)
	{
	struct gpio_atcgpio100_data * const data = port->data;
	uint32_t port_value;

	k_spinlock_key_t key = k_spin_lock(&data->lock);

	port_value = INWORD(GPIO_DOUT(port));
	OUTWORD(GPIO_DOUT(port), port_value ^ pins);

	k_spin_unlock(&data->lock, key);

	return 0;
	}

	static int gpio_atcgpio100_pin_interrupt_configure(
	const struct device *port,
	gpio_pin_t pin,
	enum gpio_int_mode mode,
	enum gpio_int_trig trig)
	{
	struct gpio_atcgpio100_data * const data = port->data;
	uint32_t port_value, int_mode, imr_idx, ch_idx;
	k_spinlock_key_t key;

	switch (mode \| trig) {
	case GPIO_INT_EDGE_BOTH:
	int_mode = INT_DUAL_EDGE;
	break;
	case GPIO_INT_EDGE_RISING:
	int_mode = INT_POSITIVE_EDGE;
	break;
	case GPIO_INT_EDGE_FALLING:
	int_mode = INT_NEGATIVE_EDGE;
	break;
	case GPIO_INT_LEVEL_LOW:
	int_mode = INT_LOW_LEVEL;
	break;
	case GPIO_INT_LEVEL_HIGH:
	int_mode = INT_HIGH_LEVEL;
	break;
	default:
	int_mode = INT_NO_OPERATION;
	break;
	}

	imr_idx = (pin / 8);
	ch_idx = (pin % 8);

	key = k_spin_lock(&data->lock);

	if (int_mode == INT_NO_OPERATION) {
	/* Disable interrupt of pin */
	port_value = INWORD(GPIO_INTE(port));
	OUTWORD(GPIO_INTE(port), port_value & ~BIT(pin));

	/* Clear the remain pending interrupt */
	port_value = INWORD(GPIO_ISTA(port));
	OUTWORD(GPIO_ISTA(port), port_value);
	} else {
	/* Set interrupt mode of pin */
	port_value = INWORD(GPIO_IMD(port, imr_idx));
	SET_GPIO_INT_MODE(port_value, int_mode, ch_idx);
	OUTWORD(GPIO_IMD(port, imr_idx), port_value);

	/* Enable interrupt of pin */
	port_value = INWORD(GPIO_INTE(port));
	OUTWORD(GPIO_INTE(port), port_value \| BIT(pin));
	}

	k_spin_unlock(&data->lock, key);

	return 0;
	}

	static int gpio_atcgpio100_manage_callback(const struct device *port,
	struct gpio_callback *callback,
	bool set)
	{

	struct gpio_atcgpio100_data * const data = port->data;

	return gpio_manage_callback(&data->cb, callback, set);
	}

	static void gpio_atcgpio100_irq_handler(const struct device *port)
	{
	struct gpio_atcgpio100_data * const data = port->data;
	uint32_t port_value;

	port_value = INWORD(GPIO_ISTA(port));
	OUTWORD(GPIO_ISTA(port), port_value);

	gpio_fire_callbacks(&data->cb, port, port_value);

	}

	static const struct gpio_driver_api gpio_atcgpio100_api = {
	.pin_configure = gpio_atcgpio100_config,
	.port_get_raw = gpio_atcgpio100_port_get_raw,
	.port_set_masked_raw = gpio_atcgpio100_set_masked_raw,
	.port_set_bits_raw = gpio_atcgpio100_set_bits_raw,
	.port_clear_bits_raw = gpio_atcgpio100_clear_bits_raw,
	.port_toggle_bits = gpio_atcgpio100_toggle_bits,
	.pin_interrupt_configure = gpio_atcgpio100_pin_interrupt_configure,
	.manage_callback = gpio_atcgpio100_manage_callback
	};

	static int gpio_atcgpio100_init(const struct device *port)
	{
	const struct gpio_atcgpio100_config * const dev_cfg = port->config;

	/* Disable all interrupts */
	OUTWORD(GPIO_INTE(port), BIT_MASK(0));

	/* Write 1 to clear interrupt status */
	OUTWORD(GPIO_ISTA(port), (uint32_t) BIT64_MASK(32));

	/* Configure GPIO device */
	dev_cfg->cfg_func();

	/* Enable PLIC interrupt GPIO source */
	irq_enable(dev_cfg->irq_num);

	return 0;
	}

	#define GPIO_ATCGPIO100_INIT(n) \
	static void gpio_atcgpio100_cfg_func_##n(void); \
	static struct gpio_atcgpio100_data gpio_atcgpio100_data_##n; \
	\
	static const struct gpio_atcgpio100_config \
	gpio_atcgpio100_config_##n = { \
	.common = { \
	.port_pin_mask = \
	GPIO_PORT_PIN_MASK_FROM_DT_INST(n), \
	}, \
	.base = DT_INST_REG_ADDR(n), \
	.irq_num = DT_INST_IRQN(n), \
	.cfg_func = gpio_atcgpio100_cfg_func_##n \
	}; \
	\
	DEVICE_DT_INST_DEFINE(n, \
	gpio_atcgpio100_init, \
	NULL, \
	&gpio_atcgpio100_data_##n, \
	&gpio_atcgpio100_config_##n, \
	PRE_KERNEL_1, \
	CONFIG_GPIO_INIT_PRIORITY, \
	&gpio_atcgpio100_api); \
	\
	static void gpio_atcgpio100_cfg_func_##n(void) \
	{ \
	IRQ_CONNECT(DT_INST_IRQN(n), \
	DT_INST_IRQ(n, priority), \
	gpio_atcgpio100_irq_handler, \
	DEVICE_DT_INST_GET(n), \
	0); \
	return; \
	} \


	DT_INST_FOREACH_STATUS_OKAY(GPIO_ATCGPIO100_INIT)