| # Kconfig.qmsi - QMSI GPIO configuration options |
| # |
| # |
| # Copyright (c) 2016 Intel Corporation |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| # |
| |
| menuconfig GPIO_QMSI |
| bool "QMSI GPIO driver" |
| depends on GPIO && QMSI |
| default n |
| help |
| Enable the GPIO driver found on Intel Microcontroller |
| boards, using the QMSI library. |
| |
| menuconfig GPIO_QMSI_SS |
| bool "QMSI GPIO SS driver" |
| depends on GPIO && QMSI && ARC |
| default n |
| help |
| Enable the GPIO driver found on Intel Microcontroller |
| boards, on the sensor subsystem, using the QMSI library. |
| |
| if GPIO_QMSI || GPIO_QMSI_SS |
| |
| config GPIO_QMSI_INIT_PRIORITY |
| int |
| default 60 |
| depends on GPIO_QMSI |
| prompt "Init priority" |
| help |
| Device driver initialization priority. |
| |
| config GPIO_QMSI_API_REENTRANCY |
| bool |
| prompt "GPIO driver API reentrancy" |
| depends on GPIO_QMSI |
| default n |
| help |
| Enable support for QMSI GPIO driver API reentrancy. |
| |
| if GPIO_QMSI |
| |
| config GPIO_QMSI_0 |
| bool "QMSI GPIO block 0" |
| default n |
| help |
| Include support for the GPIO port 0 using QMSI. |
| |
| config GPIO_QMSI_0_NAME |
| string "Driver name" |
| depends on GPIO_QMSI_0 |
| default "GPIO_0" |
| |
| config GPIO_QMSI_0_IRQ_PRI |
| int "Controller interrupt priority" |
| depends on GPIO_QMSI_0 |
| help |
| IRQ priority |
| |
| config GPIO_QMSI_1 |
| bool "QMSI GPIO block 1" |
| default n |
| help |
| Include support for the GPIO port 1 using QMSI. |
| |
| config GPIO_QMSI_1_NAME |
| string "Driver name" |
| depends on GPIO_QMSI_1 |
| default "GPIO_1" |
| |
| config GPIO_QMSI_1_IRQ_PRI |
| int "Controller interrupt priority" |
| depends on GPIO_QMSI_1 |
| help |
| IRQ priority |
| |
| endif # GPIO_QMSI |
| |
| if GPIO_QMSI_SS |
| |
| config GPIO_QMSI_SS_0 |
| bool "QMSI GPIO SS block 0" |
| default n |
| help |
| Include support for the GPIO SS port 0 using QMSI. |
| |
| config GPIO_QMSI_SS_0_NAME |
| string "Driver name" |
| depends on GPIO_QMSI_SS_0 |
| default "GPIO_SS_0" |
| |
| config GPIO_QMSI_SS_0_IRQ_PRI |
| int "Controller interrupt priority" |
| depends on GPIO_QMSI_SS_0 |
| help |
| IRQ priority |
| |
| config GPIO_QMSI_SS_1 |
| bool "QMSI GPIO SS block 1" |
| default n |
| help |
| Include support for the GPIO SS port 1 using QMSI. |
| |
| config GPIO_QMSI_SS_1_NAME |
| string "Driver name" |
| depends on GPIO_QMSI_SS_1 |
| default "GPIO_SS_1" |
| |
| config GPIO_QMSI_SS_1_IRQ_PRI |
| int "Controller interrupt priority" |
| depends on GPIO_QMSI_SS_1 |
| help |
| IRQ priority |
| |
| endif # GPIO_QMSI_SS |
| |
| endif # GPIO_QMSI || GPIO_QMSI_SS |
