drivers/serial/uart_renesas_rz_scif.c

/*
 * Copyright (c) 2024 Renesas Electronics Corporation
 * SPDX-License-Identifier: Apache-2.0
 */

#define DT_DRV_COMPAT renesas_rz_scif_uart

#include <zephyr/drivers/pinctrl.h>
#include <zephyr/drivers/uart.h>
#include <zephyr/logging/log.h>
#include <zephyr/irq.h>
#include "r_scif_uart.h"

LOG_MODULE_REGISTER(rz_scif_uart);

struct uart_rz_scif_config {
	const struct pinctrl_dev_config *pin_config;
	const uart_api_t *fsp_api;
};

struct uart_rz_scif_int {
	bool rxi_flag;
	bool tei_flag;
	bool rx_fifo_busy;
	bool irq_rx_enable;
	bool irq_tx_enable;
	uint8_t rx_byte;
	uint8_t tx_byte;
	uart_event_t event;
};

struct uart_rz_scif_data {
	struct uart_config uart_config;
	uart_cfg_t *fsp_cfg;
	struct uart_rz_scif_int int_data;
	scif_uart_instance_ctrl_t *fsp_ctrl;
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
	uart_irq_callback_user_data_t callback;
	void *callback_data;
#endif
};

#ifdef CONFIG_UART_INTERRUPT_DRIVEN
void scif_uart_rxi_isr(void);
void scif_uart_txi_isr(void);
void scif_uart_tei_isr(void);
void scif_uart_eri_isr(void);
void scif_uart_bri_isr(void);
#endif

static int uart_rz_scif_poll_in(const struct device *dev, unsigned char *c)
{
	struct uart_rz_scif_data *data = dev->data;
	R_SCIFA0_Type *reg = data->fsp_ctrl->p_reg;

	if (reg->FDR_b.R == 0U) {
		/* There are no characters available to read. */
		return -1;
	}
	*c = reg->FRDR;

	return 0;
}

static void uart_rz_scif_poll_out(const struct device *dev, unsigned char c)
{
	struct uart_rz_scif_data *data = dev->data;
	R_SCIFA0_Type *reg = data->fsp_ctrl->p_reg;
	uint8_t key;

	key = irq_lock();

	while (!reg->FSR_b.TDFE) {
	}

	reg->FTDR = c;

	while (!reg->FSR_b.TEND) {
	}

	irq_unlock(key);
}

static int uart_rz_scif_err_check(const struct device *dev)
{
	struct uart_rz_scif_data *data = dev->data;
	uart_event_t event = data->int_data.event;
	int err = 0;

	if (event & UART_EVENT_ERR_OVERFLOW) {
		err |= UART_ERROR_OVERRUN;
	}
	if (event & UART_EVENT_ERR_FRAMING) {
		err |= UART_ERROR_FRAMING;
	}
	if (event & UART_EVENT_ERR_PARITY) {
		err |= UART_ERROR_PARITY;
	}

	return err;
}

static int uart_rz_scif_apply_config(const struct device *dev)
{
	struct uart_rz_scif_data *data = dev->data;

	struct uart_config *uart_config = &data->uart_config;
	uart_cfg_t *fsp_cfg = data->fsp_cfg;

	scif_baud_setting_t baud_setting;
	scif_uart_extended_cfg_t config_extend;
	const scif_uart_extended_cfg_t *fsp_config_extend = fsp_cfg->p_extend;

	fsp_err_t fsp_err;

	fsp_err = R_SCIF_UART_BaudCalculate(data->fsp_ctrl, uart_config->baudrate, false, 5000,
					    &baud_setting);
	if (fsp_err) {
		return -EIO;
	}

	memcpy(fsp_config_extend->p_baud_setting, &baud_setting, sizeof(scif_baud_setting_t));

	switch (uart_config->data_bits) {
	case UART_CFG_DATA_BITS_7:
		fsp_cfg->data_bits = UART_DATA_BITS_7;
		break;
	case UART_CFG_DATA_BITS_8:
		fsp_cfg->data_bits = UART_DATA_BITS_8;
		break;
	default:
		return -ENOTSUP;
	}

	switch (uart_config->parity) {
	case UART_CFG_PARITY_NONE:
		fsp_cfg->parity = UART_PARITY_OFF;
		break;
	case UART_CFG_PARITY_ODD:
		fsp_cfg->parity = UART_PARITY_ODD;
		break;
	case UART_CFG_PARITY_EVEN:
		fsp_cfg->parity = UART_PARITY_EVEN;
		break;
	default:
		return -ENOTSUP;
	}

	switch (uart_config->stop_bits) {
	case UART_CFG_STOP_BITS_1:
		fsp_cfg->stop_bits = UART_STOP_BITS_1;
		break;
	case UART_CFG_STOP_BITS_2:
		fsp_cfg->stop_bits = UART_STOP_BITS_2;
		break;
	default:
		return -ENOTSUP;
	}

	memcpy(&config_extend, fsp_config_extend->p_baud_setting, sizeof(scif_baud_setting_t));

	switch (uart_config->flow_ctrl) {
	case UART_CFG_FLOW_CTRL_NONE:
		config_extend.flow_control = SCIF_UART_FLOW_CONTROL_NONE;
		config_extend.uart_mode = SCIF_UART_MODE_RS232;
		config_extend.rs485_setting.enable = SCI_UART_RS485_DISABLE;
		break;
	case UART_CFG_FLOW_CTRL_RTS_CTS:
		config_extend.flow_control = SCIF_UART_FLOW_CONTROL_AUTO;
		config_extend.uart_mode = SCIF_UART_MODE_RS232;
		config_extend.rs485_setting.enable = SCI_UART_RS485_DISABLE;
		break;
	default:
		return -ENOTSUP;
	}

	memcpy(fsp_config_extend->p_baud_setting, &config_extend, sizeof(scif_baud_setting_t));

	return 0;
}

#ifdef CONFIG_UART_USE_RUNTIME_CONFIGURE

static int uart_rz_scif_configure(const struct device *dev, const struct uart_config *cfg)
{
	int err;
	fsp_err_t fsp_err;
	const struct uart_rz_scif_config *config = dev->config;
	struct uart_rz_scif_data *data = dev->data;

	memcpy(&data->uart_config, cfg, sizeof(struct uart_config));

	err = uart_rz_scif_apply_config(dev);

	if (err) {
		return err;
	}

	fsp_err = config->fsp_api->close(data->fsp_ctrl);
	if (fsp_err) {
		return -EIO;
	}

	fsp_err = config->fsp_api->open(data->fsp_ctrl, data->fsp_cfg);
	if (fsp_err) {
		return -EIO;
	}

	return err;
}

static int uart_rz_scif_config_get(const struct device *dev, struct uart_config *cfg)
{
	struct uart_rz_scif_data *data = dev->data;

	memcpy(cfg, &data->uart_config, sizeof(struct uart_config));
	return 0;
}

#endif /* CONFIG_UART_USE_RUNTIME_CONFIGURE */

#ifdef CONFIG_UART_INTERRUPT_DRIVEN

static int uart_rz_scif_fifo_fill(const struct device *dev, const uint8_t *tx_data, int size)
{
	struct uart_rz_scif_data *data = dev->data;
	scif_uart_instance_ctrl_t *fsp_ctrl = data->fsp_ctrl;

	fsp_ctrl->tx_src_bytes = size;
	fsp_ctrl->p_tx_src = tx_data;

	scif_uart_txi_isr();

	return (size - fsp_ctrl->tx_src_bytes);
}

static int uart_rz_scif_fifo_read(const struct device *dev, uint8_t *rx_data, const int size)
{
	struct uart_rz_scif_data *data = dev->data;

	scif_uart_instance_ctrl_t *fsp_ctrl = data->fsp_ctrl;

	fsp_ctrl->rx_dest_bytes = size;
	fsp_ctrl->p_rx_dest = rx_data;

	/* Read all available data in the FIFO */
	/* If there are more available data than required, they will be lost */
	if (data->int_data.rxi_flag) {
		scif_uart_rxi_isr();
	} else {
		scif_uart_tei_isr();
	}

	data->int_data.rx_fifo_busy = false;

	return (size - fsp_ctrl->rx_dest_bytes);
}

static void uart_rz_scif_irq_rx_enable(const struct device *dev)
{
	const struct uart_rz_scif_config *config = dev->config;
	struct uart_rz_scif_data *data = dev->data;

	data->int_data.irq_rx_enable = true;

	/* Prepare 1-byte buffer to receive, it will be overwritten by fifo read */
	config->fsp_api->read(data->fsp_ctrl, &(data->int_data.rx_byte), 1);
}

static void uart_rz_scif_irq_rx_disable(const struct device *dev)
{
	struct uart_rz_scif_data *data = dev->data;

	data->int_data.irq_rx_enable = false;
	data->int_data.rx_fifo_busy = false;
}

static void uart_rz_scif_irq_tx_enable(const struct device *dev)
{
	struct uart_rz_scif_data *data = dev->data;
	const struct uart_rz_scif_config *config = dev->config;

	data->int_data.irq_tx_enable = true;

	/* Trigger TX with a NULL frame */
	/* It is expected not to be sent, and will be overwritten by the fifo fill */
	data->int_data.tx_byte = '\0';
	config->fsp_api->write(data->fsp_ctrl, &data->int_data.tx_byte, 1);
}

static void uart_rz_scif_irq_tx_disable(const struct device *dev)
{
	struct uart_rz_scif_data *data = dev->data;

	data->int_data.irq_tx_enable = false;
}

static int uart_rz_scif_irq_tx_ready(const struct device *dev)
{
	struct uart_rz_scif_data *data = dev->data;

	return data->int_data.irq_tx_enable;
}

static int uart_rz_scif_irq_rx_ready(const struct device *dev)
{
	struct uart_rz_scif_data *data = dev->data;

	return data->int_data.rx_fifo_busy && data->int_data.irq_rx_enable;
}

static int uart_rz_scif_irq_is_pending(const struct device *dev)
{
	return (uart_rz_scif_irq_tx_ready(dev)) || (uart_rz_scif_irq_rx_ready(dev));
}

static void uart_rz_scif_irq_callback_set(const struct device *dev,
					  uart_irq_callback_user_data_t cb, void *cb_data)
{
	struct uart_rz_scif_data *data = dev->data;

	data->callback = cb;
	data->callback_data = cb_data;
}

static int uart_rz_scif_irq_update(const struct device *dev)
{
	ARG_UNUSED(dev);
	return 1;
}

static void uart_rz_scif_rxi_isr(const struct device *dev)
{
	struct uart_rz_scif_data *data = dev->data;

	data->int_data.rxi_flag = true;
	data->int_data.rx_fifo_busy = true;
	if (data->callback) {
		data->callback(dev, data->callback_data);
	}
}

static void uart_rz_scif_txi_isr(const struct device *dev)
{
	struct uart_rz_scif_data *data = dev->data;

	data->int_data.tei_flag = false;
	if (data->callback) {
		data->callback(dev, data->callback_data);
	}
}

static void uart_rz_scif_tei_isr(const struct device *dev)
{
	struct uart_rz_scif_data *data = dev->data;

	if (data->int_data.tei_flag) {
		scif_uart_tei_isr();
	} else {
		data->int_data.rxi_flag = false;
		data->int_data.rx_fifo_busy = true;
		if (data->callback) {
			data->callback(dev, data->callback_data);
		}
	}
}

static void uart_rz_scif_eri_isr(const struct device *dev)
{
	scif_uart_eri_isr();
}

static void uart_rz_scif_bri_isr(const struct device *dev)
{
	scif_uart_bri_isr();
}

static void uart_rz_scif_event_handler(uart_callback_args_t *p_args)
{
	const struct device *dev = (const struct device *)p_args->p_context;
	struct uart_rz_scif_data *data = dev->data;

	data->int_data.event = p_args->event;
	switch (p_args->event) {
	case UART_EVENT_RX_CHAR:
		data->int_data.rx_byte = p_args->data;
		break;
	case UART_EVENT_RX_COMPLETE:
		break;
	case UART_EVENT_TX_DATA_EMPTY:
		data->int_data.tei_flag = true;
		break;
	case UART_EVENT_TX_COMPLETE:
		data->int_data.tei_flag = false;
		break;
	default:
		break;
	}
}

#endif /* CONFIG_UART_INTERRUPT_DRIVEN */

static DEVICE_API(uart, uart_rz_scif_driver_api) = {
	.poll_in = uart_rz_scif_poll_in,
	.poll_out = uart_rz_scif_poll_out,
	.err_check = uart_rz_scif_err_check,
#ifdef CONFIG_UART_USE_RUNTIME_CONFIGURE
	.configure = uart_rz_scif_configure,
	.config_get = uart_rz_scif_config_get,
#endif
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
	.fifo_fill = uart_rz_scif_fifo_fill,
	.fifo_read = uart_rz_scif_fifo_read,
	.irq_rx_enable = uart_rz_scif_irq_rx_enable,
	.irq_rx_disable = uart_rz_scif_irq_rx_disable,
	.irq_tx_enable = uart_rz_scif_irq_tx_enable,
	.irq_tx_disable = uart_rz_scif_irq_tx_disable,
	.irq_tx_ready = uart_rz_scif_irq_tx_ready,
	.irq_rx_ready = uart_rz_scif_irq_rx_ready,
	.irq_is_pending = uart_rz_scif_irq_is_pending,
	.irq_callback_set = uart_rz_scif_irq_callback_set,
	.irq_update = uart_rz_scif_irq_update,
#endif /* CONFIG_UART_INTERRUPT_DRIVEN */
};

static int uart_rz_scif_init(const struct device *dev)
{
	const struct uart_rz_scif_config *config = dev->config;
	struct uart_rz_scif_data *data = dev->data;
	int ret;

	/* Configure dt provided device signals when available */
	ret = pinctrl_apply_state(config->pin_config, PINCTRL_STATE_DEFAULT);
	if (ret < 0) {
		return ret;
	}

	/* uart_rz_scif_apply_config must be called first before open api */
	ret = uart_rz_scif_apply_config(dev);
	if (ret < 0) {
		return ret;
	}

	config->fsp_api->open(data->fsp_ctrl, data->fsp_cfg);

	return 0;
}

#define UART_RZG_IRQ_CONNECT(n, irq_name, isr)                                                     \
	do {                                                                                       \
		IRQ_CONNECT(DT_INST_IRQ_BY_NAME(n, irq_name, irq),                                 \
			    DT_INST_IRQ_BY_NAME(n, irq_name, priority), isr,                       \
			    DEVICE_DT_INST_GET(n), 0);                                             \
		irq_enable(DT_INST_IRQ_BY_NAME(n, irq_name, irq));                                 \
	} while (0)

#define UART_RZG_CONFIG_FUNC(n)                                                                    \
	UART_RZG_IRQ_CONNECT(n, eri, uart_rz_scif_eri_isr);                                        \
	UART_RZG_IRQ_CONNECT(n, rxi, uart_rz_scif_rxi_isr);                                        \
	UART_RZG_IRQ_CONNECT(n, txi, uart_rz_scif_txi_isr);                                        \
	UART_RZG_IRQ_CONNECT(n, tei, uart_rz_scif_tei_isr);                                        \
	UART_RZG_IRQ_CONNECT(n, bri, uart_rz_scif_bri_isr);

#define UART_RZG_INIT(n)                                                                           \
	static scif_uart_instance_ctrl_t g_uart##n##_ctrl;                                         \
	static scif_baud_setting_t g_uart##n##_baud_setting;                                       \
	static scif_uart_extended_cfg_t g_uart##n##_cfg_extend = {                                 \
		.bri_ipl = DT_INST_IRQ_BY_NAME(n, bri, priority),                                  \
		.bri_irq = DT_INST_IRQ_BY_NAME(n, bri, irq),                                       \
		.clock = SCIF_UART_CLOCK_INT,                                                      \
		.noise_cancel = SCIF_UART_NOISE_CANCELLATION_ENABLE,                               \
		.p_baud_setting = &g_uart##n##_baud_setting,                                       \
		.rx_fifo_trigger = SCIF_UART_RECEIVE_TRIGGER_MAX,                                  \
		.rts_fifo_trigger = SCIF_UART_RTS_TRIGGER_14,                                      \
		.uart_mode = SCIF_UART_MODE_RS232,                                                 \
		.flow_control = SCIF_UART_FLOW_CONTROL_NONE,                                       \
		.rs485_setting =                                                                   \
			{                                                                          \
				.enable = (sci_uart_rs485_enable_t)NULL,                           \
				.polarity = SCI_UART_RS485_DE_POLARITY_HIGH,                       \
				.de_control_pin =                                                  \
					(bsp_io_port_pin_t)SCIF_UART_INVALID_16BIT_PARAM,          \
			},                                                                         \
	};                                                                                         \
	static uart_cfg_t g_uart##n##_cfg = {                                                      \
		.channel = DT_INST_PROP(n, channel),                                               \
		.p_extend = &g_uart##n##_cfg_extend,                                               \
		.p_transfer_tx = NULL,                                                             \
		.p_transfer_rx = NULL,                                                             \
		.rxi_ipl = DT_INST_IRQ_BY_NAME(n, rxi, priority),                                  \
		.txi_ipl = DT_INST_IRQ_BY_NAME(n, txi, priority),                                  \
		.tei_ipl = DT_INST_IRQ_BY_NAME(n, tei, priority),                                  \
		.eri_ipl = DT_INST_IRQ_BY_NAME(n, eri, priority),                                  \
		.rxi_irq = DT_INST_IRQ_BY_NAME(n, rxi, irq),                                       \
		.txi_irq = DT_INST_IRQ_BY_NAME(n, txi, irq),                                       \
		.tei_irq = DT_INST_IRQ_BY_NAME(n, tei, irq),                                       \
		.eri_irq = DT_INST_IRQ_BY_NAME(n, eri, irq),                                       \
		IF_ENABLED(CONFIG_UART_INTERRUPT_DRIVEN, (                                         \
			 .p_callback = uart_rz_scif_event_handler,                                 \
			 .p_context = (void *)DEVICE_DT_INST_GET(n),)) };                          \
	PINCTRL_DT_INST_DEFINE(n);                                                                 \
	static const struct uart_rz_scif_config uart_rz_scif_config_##n = {                        \
		.pin_config = PINCTRL_DT_INST_DEV_CONFIG_GET(n),                                   \
		.fsp_api = &g_uart_on_scif,                                                        \
	};                                                                                         \
	static struct uart_rz_scif_data uart_rz_scif_data_##n = {                                  \
		.uart_config =                                                                     \
			{                                                                          \
				.baudrate = DT_INST_PROP(n, current_speed),                        \
				.parity = DT_INST_ENUM_IDX(n, parity),                             \
				.stop_bits = DT_INST_ENUM_IDX(n, stop_bits),                       \
				.data_bits = DT_INST_ENUM_IDX(n, data_bits),                       \
				.flow_ctrl = DT_INST_PROP_OR(n, hw_flow_control,                   \
							     UART_CFG_FLOW_CTRL_NONE),             \
			},                                                                         \
		.fsp_cfg = &g_uart##n##_cfg,                                                       \
		.fsp_ctrl = &g_uart##n##_ctrl,                                                     \
	};                                                                                         \
	static int uart_rz_scif_init_##n(const struct device *dev)                                 \
	{                                                                                          \
		IF_ENABLED(CONFIG_UART_INTERRUPT_DRIVEN,                    \
			   (UART_RZG_CONFIG_FUNC(n);))                      \
		return uart_rz_scif_init(dev);                                                     \
	}                                                                                          \
	DEVICE_DT_INST_DEFINE(n, &uart_rz_scif_init_##n, NULL, &uart_rz_scif_data_##n,             \
			      &uart_rz_scif_config_##n, PRE_KERNEL_1, CONFIG_SERIAL_INIT_PRIORITY, \
			      &uart_rz_scif_driver_api);

DT_INST_FOREACH_STATUS_OKAY(UART_RZG_INIT)