blob: 966e135d0e562a599ce59d0c88216dd3daf22e09 [file] [log] [blame]
/*
* LPCUSB, an USB device driver for LPC microcontrollers
* Copyright (C) 2006 Bertrik Sikken (bertrik@sikken.nl)
* Copyright (c) 2016 Intel Corporation
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* @file
* @brief USB device core layer
*
* This module handles control transfer handler, standard request handler and
* USB Interface for customer application.
*
* Control transfers handler is normally installed on the
* endpoint 0 callback.
*
* Control transfers can be of the following type:
* 0 Standard;
* 1 Class;
* 2 Vendor;
* 3 Reserved.
*
* A callback can be installed for each of these control transfers using
* usb_register_request_handler.
* When an OUT request arrives, data is collected in the data store provided
* with the usb_register_request_handler call. When the transfer is done, the
* callback is called.
* When an IN request arrives, the callback is called immediately to either
* put the control transfer data in the data store, or to get a pointer to
* control transfer data. The data is then packetised and sent to the host.
*
* Standard request handler handles the 'chapter 9' processing, specifically
* the standard device requests in table 9-3 from the universal serial bus
* specification revision 2.0
*/
#include <errno.h>
#include <stddef.h>
#include <misc/util.h>
#include <misc/__assert.h>
#include <board.h>
#if defined(USB_VUSB_EN_GPIO)
#include <gpio.h>
#endif
#include "usb_device.h"
#ifndef CONFIG_USB_DEBUG
#define DBG(...) { ; }
#else
#if defined(CONFIG_STDOUT_CONSOLE)
#include <stdio.h>
#define DBG printf
#else
#include <misc/printk.h>
#define DBG printk
#endif /* CONFIG_STDOUT_CONSOLE */
#endif /* CONFIG_USB_DEBUG */
#define MAX_DESC_HANDLERS 4 /** Device, interface, endpoint, other */
/* general descriptor field offsets */
#define DESC_bLength 0 /** Length offset */
#define DESC_bDescriptorType 1 /** Descriptor type offset */
/* config descriptor field offsets */
#define CONF_DESC_wTotalLength 2 /** Total length offset */
#define CONF_DESC_bConfigurationValue 5 /** Configuration value offset */
#define CONF_DESC_bmAttributes 7 /** configuration characteristics */
/* interface descriptor field offsets */
#define INTF_DESC_bAlternateSetting 3 /** Alternate setting offset */
/* endpoint descriptor field offsets */
#define ENDP_DESC_bEndpointAddress 2 /** Endpoint address offset */
#define ENDP_DESC_bmAttributes 3 /** Bulk or interrupt? */
#define ENDP_DESC_wMaxPacketSize 4 /** Maximum packet size offset */
#define MAX_NUM_REQ_HANDLERS (4)
#define MAX_STD_REQ_MSG_SIZE 8
/* Default USB control EP, always 0 and 0x80 */
#define USB_CONTROL_OUT_EP0 0
#define USB_CONTROL_IN_EP0 0x80
static struct usb_dev_priv {
/** Setup packet */
struct usb_setup_packet setup;
/** Pointer to data buffer */
uint8_t *data_buf;
/** Eemaining bytes in buffer */
int32_t data_buf_residue;
/** Total length of control transfer */
int32_t data_buf_len;
/** Installed custom request handler */
usb_request_handler custom_req_handler;
/** USB stack status clalback */
usb_status_callback status_callback;
/** Pointer to registered descriptors */
const uint8_t *descriptors;
/** Array of installed request handler callbacks */
usb_request_handler req_handlers[MAX_NUM_REQ_HANDLERS];
/** Array of installed request data pointers */
uint8_t *data_store[MAX_NUM_REQ_HANDLERS];
/* Buffer used for storing standard usb request data */
uint8_t std_req_data[MAX_STD_REQ_MSG_SIZE];
/** Variable to check whether the usb has been enabled */
bool enabled;
/** Currently selected configuration */
uint8_t configuration;
} usb_dev;
/*
* @brief print the contents of a setup packet
*
* @param [in] setup The setup packet
*
*/
static void usb_print_setup(struct usb_setup_packet *setup)
{
/* avoid compiler warning if DBG is not defined */
setup = setup;
DBG("SETUP\n");
DBG("%x %x %x %x %x\n",
setup->bmRequestType,
setup->bRequest,
setup->wValue,
setup->wIndex,
setup->wLength);
}
/*
* @brief handle a request by calling one of the installed request handlers
*
* Local function to handle a request by calling one of the installed request
* handlers. In case of data going from host to device, the data is at *ppbData.
* In case of data going from device to host, the handler can either choose to
* write its data at *ppbData or update the data pointer.
*
* @param [in] setup The setup packet
* @param [in,out] len Pointer to data length
* @param [in,out] data Data buffer
*
* @return true if the request was handles successfully
*/
static bool usb_handle_request(struct usb_setup_packet *setup,
int32_t *len, uint8_t **data)
{
uint32_t type = REQTYPE_GET_TYPE(setup->bmRequestType);
usb_request_handler handler = usb_dev.req_handlers[type];
DBG("** %d **\n", type);
if (type >= MAX_NUM_REQ_HANDLERS) {
DBG("Error Incorrect iType %d\n", type);
return false;
}
if (handler == NULL) {
DBG("No handler for reqtype %d\n", type);
return false;
}
if ((*handler)(setup, len, data) < 0) {
DBG("Handler Error %d\n", type);
usb_print_setup(setup);
return false;
}
return true;
}
/*
* @brief send next chunk of data (possibly 0 bytes) to host
*
* @return N/A
*/
static void usb_data_to_host(void)
{
uint32_t chunk = min(MAX_PACKET_SIZE0, usb_dev.data_buf_residue);
/*Always EP0 for control*/
usb_dc_ep_write(0x80, usb_dev.data_buf, chunk, &chunk);
usb_dev.data_buf += chunk;
usb_dev.data_buf_residue -= chunk;
}
/*
* @brief handle IN/OUT transfers on EP0
*
* @param [in] ep Endpoint address
* @param [in] ep_status Endpoint status
*
* @return N/A
*/
static void usb_handle_control_transfer(uint8_t ep,
enum usb_dc_ep_cb_status_code ep_status)
{
uint32_t chunk = 0;
uint32_t type = 0;
struct usb_setup_packet *setup = &usb_dev.setup;
DBG("usb_handle_control_transfer ep %x, status %x\n", ep, ep_status);
if (ep == USB_CONTROL_OUT_EP0 && ep_status == USB_DC_EP_SETUP) {
/*
* OUT transfer, Setup packet,
* reset request message state machine
*/
if (usb_dc_ep_read(ep,
(uint8_t *)setup, sizeof(*setup), NULL) < 0) {
DBG("Read Setup Packet failed\n");
usb_dc_ep_set_stall(USB_CONTROL_IN_EP0);
return;
}
/* Defaults for data pointer and residue */
type = REQTYPE_GET_TYPE(setup->bmRequestType);
usb_dev.data_buf = usb_dev.data_store[type];
usb_dev.data_buf_residue = setup->wLength;
usb_dev.data_buf_len = setup->wLength;
if (!(setup->wLength == 0) &&
!(REQTYPE_GET_DIR(setup->bmRequestType) ==
REQTYPE_DIR_TO_HOST)) {
return;
}
/* Ask installed handler to process request */
if (!usb_handle_request(setup,
&usb_dev.data_buf_len, &usb_dev.data_buf)) {
DBG("usb_handle_request failed\n");
usb_dc_ep_set_stall(USB_CONTROL_IN_EP0);
return;
}
/* Send smallest of requested and offered length */
usb_dev.data_buf_residue = min(usb_dev.data_buf_len,
setup->wLength);
/* Send first part (possibly a zero-length status message) */
usb_data_to_host();
} else if (ep == USB_CONTROL_OUT_EP0) {
/* OUT transfer, data or status packets */
if (usb_dev.data_buf_residue <= 0) {
/* absorb zero-length status message */
if (usb_dc_ep_read(USB_CONTROL_OUT_EP0,
usb_dev.data_buf, 0, &chunk) < 0) {
DBG("Read DATA Packet failed\n");
usb_dc_ep_set_stall(USB_CONTROL_IN_EP0);
}
DBG(chunk > 0 ? "?" : "");
return;
}
if (usb_dc_ep_read(USB_CONTROL_OUT_EP0,
usb_dev.data_buf,
usb_dev.data_buf_residue, &chunk) < 0) {
DBG("Read DATA Packet failed\n");
usb_dc_ep_set_stall(USB_CONTROL_IN_EP0);
return;
}
usb_dev.data_buf += chunk;
usb_dev.data_buf_residue -= chunk;
if (usb_dev.data_buf_residue == 0) {
/* Received all, send data to handler */
type = REQTYPE_GET_TYPE(setup->bmRequestType);
usb_dev.data_buf = usb_dev.data_store[type];
if (!usb_handle_request(setup,
&usb_dev.data_buf_len, &usb_dev.data_buf)) {
DBG("usb_handle_request1 failed\n");
usb_dc_ep_set_stall(USB_CONTROL_IN_EP0);
return;
}
/*Send status to host*/
DBG(">> usb_data_to_host(2)\n");
usb_data_to_host();
}
} else if (ep == USB_CONTROL_IN_EP0) {
/* Send more data if available */
if (usb_dev.data_buf_residue != 0) {
usb_data_to_host();
}
} else {
__ASSERT_NO_MSG(false);
}
}
/*
* @brief register a callback for handling requests
*
* @param [in] type Type of request, e.g. REQTYPE_TYPE_STANDARD
* @param [in] handler Callback function pointer
* @param [in] data_store Data storage area for this type of request
*
* @return N/A
*/
static void usb_register_request_handler(int32_t type,
usb_request_handler handler, uint8_t *data_store)
{
usb_dev.req_handlers[type] = handler;
usb_dev.data_store[type] = data_store;
}
/*
* @brief register a pointer to a descriptor block
*
* This function registers a pointer to a descriptor block containing all
* descriptors for the device.
*
* @param [in] usb_descriptors The descriptor byte array
*/
static void usb_register_descriptors(const uint8_t *usb_descriptors)
{
usb_dev.descriptors = usb_descriptors;
}
/*
* @brief get specified USB descriptor
*
* This function parses the list of installed USB descriptors and attempts
* to find the specified USB descriptor.
*
* @param [in] type_index Type and index of the descriptor
* @param [in] lang_id Language ID of the descriptor (currently unused)
* @param [out] len Descriptor length
* @param [out] data Descriptor data
*
* @return true if the descriptor was found, false otherwise
*/
static bool usb_get_descriptor(uint16_t type_index, uint16_t lang_id,
int32_t *len, uint8_t **data)
{
uint8_t type = 0;
uint8_t index = 0;
uint8_t *p = NULL;
int32_t cur_index = 0;
bool found = false;
__ASSERT_NO_MSG(usb_descriptors != NULL);
/*Avoid compiler warning until this is used for something*/
lang_id = lang_id;
type = GET_DESC_TYPE(type_index);
index = GET_DESC_INDEX(type_index);
p = (uint8_t *)usb_dev.descriptors;
cur_index = 0;
while (p[DESC_bLength] != 0) {
if (p[DESC_bDescriptorType] == type) {
if (cur_index == index) {
found = true;
break;
}
cur_index++;
}
/* skip to next descriptor */
p += p[DESC_bLength];
}
if (found) {
/* set data pointer */
*data = p;
/* get length from structure */
if (type == DESC_CONFIGURATION) {
/* configuration descriptor is an
* exception, length is at offset
* 2 and 3
*/
*len = (p[CONF_DESC_wTotalLength]) |
(p[CONF_DESC_wTotalLength + 1] << 8);
} else {
/* normally length is at offset 0 */
*len = p[DESC_bLength];
}
} else {
/* nothing found */
DBG("Desc %x not found!\n", type_index);
}
return found;
}
/*
* @brief set USB configuration
*
* This function configures the device according to the specified configuration
* index and alternate setting by parsing the installed USB descriptor list.
* A configuration index of 0 unconfigures the device.
*
* @param [in] config_index Configuration index
* @param [in] alt_setting Alternate setting number
*
* @return true if successfully configured false if error or unconfigured
*/
static bool usb_set_configuration(uint8_t config_index, uint8_t alt_setting)
{
uint8_t *p = NULL;
uint8_t cur_config = 0;
uint8_t cur_alt_setting = 0;
__ASSERT_NO_MSG(usb_descriptors != NULL);
if (config_index == 0) {
/* unconfigure device */
DBG("Device not configured - invalid configuration offset\n");
return true;
}
/* configure endpoints for this configuration/altsetting */
p = (uint8_t *)usb_dev.descriptors;
cur_config = 0xFF;
cur_alt_setting = 0xFF;
while (p[DESC_bLength] != 0) {
switch (p[DESC_bDescriptorType]) {
case DESC_CONFIGURATION:
/* remember current configuration index */
cur_config = p[CONF_DESC_bConfigurationValue];
break;
case DESC_INTERFACE:
/* remember current alternate setting */
cur_alt_setting =
p[INTF_DESC_bAlternateSetting];
break;
case DESC_ENDPOINT:
if ((cur_config == config_index) &&
(cur_alt_setting == alt_setting)) {
struct usb_dc_ep_cfg_data ep_cfg;
/* endpoint found for desired config
* and alternate setting
*/
ep_cfg.ep_type =
p[ENDP_DESC_bmAttributes];
ep_cfg.ep_mps =
(p[ENDP_DESC_wMaxPacketSize]) |
(p[ENDP_DESC_wMaxPacketSize + 1]
<< 8);
ep_cfg.ep_addr =
p[ENDP_DESC_bEndpointAddress];
usb_dc_ep_configure(&ep_cfg);
usb_dc_ep_enable(ep_cfg.ep_addr);
}
break;
default:
break;
}
/* skip to next descriptor */
p += p[DESC_bLength];
}
if (usb_dev.status_callback)
usb_dev.status_callback(USB_DC_CONFIGURED);
return true;
}
/*
* @brief handle a standard device request
*
* @param [in] setup The setup packet
* @param [in,out] len Pointer to data length
* @param [in,out] data_buf Data buffer
*
* @return true if the request was handled successfully
*/
static bool usb_handle_std_device_req(struct usb_setup_packet *setup,
int32_t *len, uint8_t **data_buf)
{
bool ret = true;
uint8_t *data = *data_buf;
switch (setup->bRequest) {
case REQ_GET_STATUS:
DBG("REQ_GET_STATUS\n");
/* bit 0: self-powered */
/* bit 1: remote wakeup = not supported */
data[0] = 0;
data[1] = 0;
*len = 2;
break;
case REQ_SET_ADDRESS:
DBG("REQ_SET_ADDRESS\n");
usb_dc_set_address(setup->wValue);
break;
case REQ_GET_DESCRIPTOR:
DBG("REQ_GET_DESCRIPTOR\n");
ret = usb_get_descriptor(setup->wValue,
setup->wIndex, len, data_buf);
break;
case REQ_GET_CONFIGURATION:
DBG("REQ_GET_CONFIGURATION\n");
/* indicate if we are configured */
data[0] = usb_dev.configuration;
*len = 1;
break;
case REQ_SET_CONFIGURATION:
DBG("REQ_SET_CONFIGURATION\n");
if (!usb_set_configuration(setup->wValue & 0xFF, 0)) {
DBG("USBSetConfiguration failed!\n");
ret = false;
} else {
/* configuration successful,
* update current configuration
*/
usb_dev.configuration = setup->wValue & 0xFF;
}
break;
case REQ_CLEAR_FEATURE:
DBG("REQ_CLEAR_FEATURE\n");
break;
case REQ_SET_FEATURE:
DBG("REQ_SET_FEATURE\n");
if (setup->wValue == FEA_REMOTE_WAKEUP) {
/* put DEVICE_REMOTE_WAKEUP code here */
}
if (setup->wValue == FEA_TEST_MODE) {
/* put TEST_MODE code here */
}
ret = false;
break;
case REQ_SET_DESCRIPTOR:
DBG("Device req %x not implemented\n", setup->bRequest);
ret = false;
break;
default:
DBG("Illegal device req %x\n", setup->bRequest);
ret = false;
break;
}
return ret;
}
/*
* @brief handle a standard interface request
*
* @param [in] setup The setup packet
* @param [in,out] len Pointer to data length
* @param [in] data_buf Data buffer
*
* @return true if the request was handled successfully
*/
static bool usb_handle_std_interface_req(struct usb_setup_packet *setup,
int32_t *len, uint8_t **data_buf)
{
uint8_t *data = *data_buf;
switch (setup->bRequest) {
case REQ_GET_STATUS:
/* no bits specified */
data[0] = 0;
data[1] = 0;
*len = 2;
break;
case REQ_CLEAR_FEATURE:
case REQ_SET_FEATURE:
/* not defined for interface */
return false;
case REQ_GET_INTERFACE:
/* there is only one interface, return n-1 (= 0) */
data[0] = 0;
*len = 1;
break;
case REQ_SET_INTERFACE:
DBG("REQ_SET_INTERFACE\n");
*len = 0;
break;
default:
DBG("Illegal interface req %d\n", setup->bRequest);
return false;
}
return true;
}
/*
* @brief handle a standard endpoint request
*
* @param [in] setup The setup packet
* @param [in,out] len Pointer to data length
* @param [in] data_buf Data buffer
*
* @return true if the request was handled successfully
*/
static bool usb_handle_std_endpoint_req(struct usb_setup_packet *setup,
int32_t *len, uint8_t **data_buf)
{
uint8_t *data = *data_buf;
switch (setup->bRequest) {
case REQ_GET_STATUS:
/* bit 0 = endpointed halted or not */
usb_dc_ep_is_stalled(setup->wIndex, &data[0]);
data[1] = 0;
*len = 2;
break;
case REQ_CLEAR_FEATURE:
if (setup->wValue == FEA_ENDPOINT_HALT) {
/* clear HALT by unstalling */
usb_dc_ep_clear_stall(setup->wIndex);
break;
}
/* only ENDPOINT_HALT defined for endpoints */
return false;
case REQ_SET_FEATURE:
if (setup->wValue == FEA_ENDPOINT_HALT) {
/* set HALT by stalling */
usb_dc_ep_set_stall(setup->wIndex);
break;
}
/* only ENDPOINT_HALT defined for endpoints */
return false;
case REQ_SYNCH_FRAME:
DBG("EP req %d not implemented\n", setup->bRequest);
return false;
default:
DBG("Illegal EP req %d\n", setup->bRequest);
return false;
}
return true;
}
/*
* @brief default handler for standard ('chapter 9') requests
*
* If a custom request handler was installed, this handler is called first.
*
* @param [in] setup The setup packet
* @param [in,out] len Pointer to data length
* @param [in] data_buf Data buffer
*
* @return true if the request was handled successfully
*/
static int usb_handle_standard_request(struct usb_setup_packet *setup,
int32_t *len, uint8_t **data_buf)
{
int rc = 0;
/* try the custom request handler first */
if ((usb_dev.custom_req_handler != NULL) &&
(!usb_dev.custom_req_handler(setup, len, data_buf)))
return 0;
switch (REQTYPE_GET_RECIP(setup->bmRequestType)) {
case REQTYPE_RECIP_DEVICE:
if (usb_handle_std_device_req(setup, len, data_buf) == false)
rc = -EINVAL;
break;
case REQTYPE_RECIP_INTERFACE:
if (usb_handle_std_interface_req(setup, len, data_buf) == false)
rc = -EINVAL;
break;
case REQTYPE_RECIP_ENDPOINT:
if (usb_handle_std_endpoint_req(setup, len, data_buf) == false)
rc = -EINVAL;
break;
default:
rc = -EINVAL;
}
return rc;
}
/*
* @brief Registers a callback for custom device requests
*
* In usb_register_custom_req_handler, the custom request handler gets a first
* chance at handling the request before it is handed over to the 'chapter 9'
* request handler.
*
* This can be used for example in HID devices, where a REQ_GET_DESCRIPTOR
* request is sent to an interface, which is not covered by the 'chapter 9'
* specification.
*
* @param [in] handler Callback function pointer
*/
static void usb_register_custom_req_handler(usb_request_handler handler)
{
usb_dev.custom_req_handler = handler;
}
/*
* @brief register a callback for device status
*
* This function registers a callback for device status. The registered callback
* is used to report changes in the status of the device controller.
*
* @param [in] cb Callback function pointer
*/
static void usb_register_status_callback(usb_status_callback cb)
{
usb_dev.status_callback = cb;
}
/**
* @brief turn on/off USB VBUS voltage
*
* @param on Set to false to turn off and to true to turn on VBUS
*
* @return 0 on success, negative errno code on fail
*/
static int usb_vbus_set(bool on)
{
#if defined(USB_VUSB_EN_GPIO)
int ret = 0;
struct device *gpio_dev = device_get_binding(USB_GPIO_DRV_NAME);
if (!gpio_dev) {
DBG("USB requires GPIO. Cannot find %s!\n", USB_GPIO_DRV_NAME);
return -ENODEV;
}
/* Enable USB IO */
ret = gpio_pin_configure(gpio_dev, USB_VUSB_EN_GPIO, GPIO_DIR_OUT);
if (ret)
return ret;
ret = gpio_pin_write(gpio_dev, USB_VUSB_EN_GPIO, on == true ? 1 : 0);
if (ret)
return ret;
#endif
return 0;
}
int usb_set_config(struct usb_cfg_data *config)
{
if (!config)
return -EINVAL;
/* register descriptors */
usb_register_descriptors(config->usb_device_description);
/* register standard request handler */
usb_register_request_handler(REQTYPE_TYPE_STANDARD,
&(usb_handle_standard_request), usb_dev.std_req_data);
/* register class request handlers for each interface*/
if (config->interface.class_handler != NULL) {
usb_register_request_handler(REQTYPE_TYPE_CLASS,
config->interface.class_handler,
config->interface.payload_data);
}
/* register class request handlers for each interface*/
if (config->interface.custom_handler != NULL) {
usb_register_custom_req_handler(
config->interface.custom_handler);
}
/* register status callback */
if (config->cb_usb_status != NULL) {
usb_register_status_callback(config->cb_usb_status);
}
return 0;
}
int usb_deconfig(void)
{
/* unregister descriptors */
usb_register_descriptors(NULL);
/* unegister standard request handler */
usb_register_request_handler(REQTYPE_TYPE_STANDARD, NULL, NULL);
/* unregister class request handlers for each interface*/
usb_register_request_handler(REQTYPE_TYPE_CLASS, NULL, NULL);
/* unregister class request handlers for each interface*/
usb_register_custom_req_handler(NULL);
/* unregister status callback */
usb_register_status_callback(NULL);
/* Reset USB controller */
usb_dc_reset();
return 0;
}
int usb_enable(struct usb_cfg_data *config)
{
int ret;
uint32_t i;
struct usb_dc_ep_cfg_data ep0_cfg;
if (true == usb_dev.enabled) {
return 0;
}
/* Enable VBUS if needed */
ret = usb_vbus_set(true);
if (ret < 0)
return ret;
ret = usb_dc_set_status_callback(config->cb_usb_status);
if (ret < 0)
return ret;
ret = usb_dc_attach();
if (ret < 0)
return ret;
/* Configure control EP */
ep0_cfg.ep_mps = MAX_PACKET_SIZE0;
ep0_cfg.ep_type = USB_DC_EP_CONTROL;
ep0_cfg.ep_addr = USB_CONTROL_OUT_EP0;
ret = usb_dc_ep_configure(&ep0_cfg);
if (ret < 0)
return ret;
ep0_cfg.ep_addr = USB_CONTROL_IN_EP0;
ret = usb_dc_ep_configure(&ep0_cfg);
if (ret < 0)
return ret;
/*register endpoint 0 handlers*/
ret = usb_dc_ep_set_callback(USB_CONTROL_OUT_EP0,
usb_handle_control_transfer);
if (ret < 0)
return ret;
ret = usb_dc_ep_set_callback(USB_CONTROL_IN_EP0,
usb_handle_control_transfer);
if (ret < 0)
return ret;
/*register endpoint handlers*/
for (i = 0; i < config->num_endpoints; i++) {
ret = usb_dc_ep_set_callback(config->endpoint[i].ep_addr,
config->endpoint[i].ep_cb);
if (ret < 0)
return ret;
}
/* enable control EP */
ret = usb_dc_ep_enable(USB_CONTROL_OUT_EP0);
if (ret < 0)
return ret;
ret = usb_dc_ep_enable(USB_CONTROL_IN_EP0);
if (ret < 0)
return ret;
usb_dev.enabled = true;
return 0;
}
int usb_disable(void)
{
int ret;
if (true != usb_dev.enabled) {
/*Already disabled*/
return 0;
}
ret = usb_dc_detach();
if (ret < 0)
return ret;
/* Disable VBUS if needed */
usb_vbus_set(false);
usb_dev.enabled = false;
return 0;
}
int usb_write(uint8_t ep, const uint8_t *data, uint32_t data_len,
uint32_t *bytes_ret)
{
return usb_dc_ep_write(ep, data, data_len, bytes_ret);
}
int usb_read(uint8_t ep, uint8_t *data, uint32_t max_data_len,
uint32_t *ret_bytes)
{
return usb_dc_ep_read(ep, data, max_data_len, ret_bytes);
}