blob: d13a4b49edcb672d1cdfb50448f9680690204d47 [file] [log] [blame]
.. _g1120b0mipi:
G1120B0MIPI MIPI Display
##########################
Overview
********
The G1120B0MIPI is a 1.2 inch circular AMOLED display, 390x390 pixels, with a
1-lane MIPI interface. This display connects to the i.MX RT595 Evaluation Kit.
More information about the shield can be found
at the `G1120B0MIPI product page`_.
This display uses a 40 pin FPC interface, which is available on many
NXP EVKs.
Pins Assignment of the G1120B0MIPI MIPI Display
==========================================================
+-----------------------+------------------------+
| FPC Connector Pin | Function |
+=======================+========================+
| 1 | LED backlight cathode |
+-----------------------+------------------------+
| 21 | Controller reset |
+-----------------------+------------------------+
| 22 | Controller LPTE |
+-----------------------+------------------------+
| 26 | Touch ctrl I2C SDA |
+-----------------------+------------------------+
| 27 | Touch ctrl I2C SCL |
+-----------------------+------------------------+
| 28 | Touch ctrl reset |
+-----------------------+------------------------+
| 29 | Touch ctrl interrupt |
+-----------------------+------------------------+
| 32 | LCD power enable |
+-----------------------+------------------------+
| 34 | Backlight power enable |
+-----------------------+------------------------+
Requirements
************
This shield can only be used with a board which provides a configuration
for the 40 pin FPC interface
Programming
***********
Set ``-DSHIELD=g1120b0mipi`` when you invoke ``west build``. For
example:
.. zephyr-app-commands::
:zephyr-app: samples/drivers/display
:board: mimxrt595_evk/mimxrt595s/cm33
:shield: g1120b0mipi
:goals: build
References
**********
.. target-notes::
.. _G1120B0MIPI product page:
https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/1-2-wearable-display-g1120b0mipi:G1120B0MIPI