| # Texas Instruments SimpleLink CC13x2 / CC26x2 |
| # Copyright (c) 2019 Brett Witherspoon |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| config SOC_SERIES_CC13X2_CC26X2 |
| select ARM |
| select CPU_CORTEX_M4 |
| select CPU_HAS_ARM_MPU |
| select DYNAMIC_INTERRUPTS |
| select CPU_CORTEX_M_HAS_DWT |
| select CPU_HAS_FPU |
| select HAS_CC13X2_CC26X2_SDK |
| select HAS_TI_CCFG if !BOOTLOADER_MCUBOOT |
| select HAS_SEGGER_RTT if ZEPHYR_SEGGER_MODULE |
| select HAS_PM |
| select HAS_POWEROFF |
| |
| menu "Customer Configuration (CCFG)" |
| depends on SOC_SERIES_CC13X2_CC26X2 |
| |
| config CC13X2_CC26X2_BOOST_MODE |
| bool "Radio boost mode (VDDR_HH)" |
| help |
| Enable the radio boost mode +14dBm (sets CCFG_FORCE_VDDR_HH to 1). |
| |
| config CC13X2_CC26X2_HAS_CUSTOM_RF_HWATTRS |
| bool "Board defines custom RFCC26XX hwAttrs structure" |
| help |
| The board defines its own RFCC26XX_hwAttrs structure (e.g., for |
| custom antenna switching callback). |
| |
| config CC13X2_CC26X2_BOOTLOADER_ENABLE |
| bool "ROM bootloader" |
| help |
| Enable the serial bootloader which resides in ROM on CC13xx / CC26xx |
| devices. |
| |
| config CC13X2_CC26X2_BOOTLOADER_BACKDOOR_ENABLE |
| bool "ROM bootloader backdoor" |
| depends on CC13X2_CC26X2_BOOTLOADER_ENABLE |
| help |
| Enable the ROM bootloader backdoor which starts the bootloader if the |
| associated pin is at the correct logic level on reset. |
| |
| config CC13X2_CC26X2_BOOTLOADER_BACKDOOR_PIN |
| int "ROM bootloader backdoor pin" |
| depends on CC13X2_CC26X2_BOOTLOADER_BACKDOOR_ENABLE |
| range 0 255 |
| default 255 |
| help |
| Set the pin that is level checked if the bootloader backdoor is |
| enabled. |
| |
| config CC13X2_CC26X2_BOOTLOADER_BACKDOOR_LEVEL |
| int "ROM bootloader backdoor level" |
| depends on CC13X2_CC26X2_BOOTLOADER_BACKDOOR_ENABLE |
| range 0 1 |
| default 0 |
| help |
| Set the active level of the pin selected for the bootloader backdoor. |
| |
| endmenu |
