| /* |
| * Copyright (c) 2015, Freescale Semiconductor, Inc. |
| * Copyright 2016-2017 NXP |
| * All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| #ifndef _FSL_MU_H_ |
| #define _FSL_MU_H_ |
| |
| #include "fsl_common.h" |
| |
| /*! |
| * @addtogroup mu |
| * @{ |
| */ |
| |
| /****************************************************************************** |
| * Definitions |
| *****************************************************************************/ |
| |
| /*! @name Driver version */ |
| /*@{*/ |
| /*! @brief MU driver version 2.0.1. */ |
| #define FSL_MU_DRIVER_VERSION (MAKE_VERSION(2, 0, 1)) |
| /*@}*/ |
| |
| /*! |
| * @brief MU status flags. |
| */ |
| enum _mu_status_flags |
| { |
| kMU_Tx0EmptyFlag = (1U << (MU_SR_TEn_SHIFT + 3U)), /*!< TX0 empty. */ |
| kMU_Tx1EmptyFlag = (1U << (MU_SR_TEn_SHIFT + 2U)), /*!< TX1 empty. */ |
| kMU_Tx2EmptyFlag = (1U << (MU_SR_TEn_SHIFT + 1U)), /*!< TX2 empty. */ |
| kMU_Tx3EmptyFlag = (1U << (MU_SR_TEn_SHIFT + 0U)), /*!< TX3 empty. */ |
| |
| kMU_Rx0FullFlag = (1U << (MU_SR_RFn_SHIFT + 3U)), /*!< RX0 full. */ |
| kMU_Rx1FullFlag = (1U << (MU_SR_RFn_SHIFT + 2U)), /*!< RX1 full. */ |
| kMU_Rx2FullFlag = (1U << (MU_SR_RFn_SHIFT + 1U)), /*!< RX2 full. */ |
| kMU_Rx3FullFlag = (1U << (MU_SR_RFn_SHIFT + 0U)), /*!< RX3 full. */ |
| |
| kMU_GenInt0Flag = (1U << (MU_SR_GIPn_SHIFT + 3U)), /*!< General purpose interrupt 0 pending. */ |
| kMU_GenInt1Flag = (1U << (MU_SR_GIPn_SHIFT + 2U)), /*!< General purpose interrupt 0 pending. */ |
| kMU_GenInt2Flag = (1U << (MU_SR_GIPn_SHIFT + 1U)), /*!< General purpose interrupt 0 pending. */ |
| kMU_GenInt3Flag = (1U << (MU_SR_GIPn_SHIFT + 0U)), /*!< General purpose interrupt 0 pending. */ |
| |
| kMU_EventPendingFlag = MU_SR_EP_MASK, /*!< MU event pending. */ |
| kMU_FlagsUpdatingFlag = MU_SR_FUP_MASK, /*!< MU flags update is on-going. */ |
| |
| #if (defined(FSL_FEATURE_MU_HAS_RESET_INT) && FSL_FEATURE_MU_HAS_RESET_INT) |
| kMU_ResetAssertInterruptFlag = MU_SR_RAIP_MASK, /*!< The other core reset assert interrupt pending. */ |
| kMU_ResetDeassertInterruptFlag = MU_SR_RDIP_MASK, /*!< The other core reset de-assert interrupt pending. */ |
| #endif |
| |
| #if (defined(FSL_FEATURE_MU_HAS_SR_RS) && FSL_FEATURE_MU_HAS_SR_RS) |
| kMU_OtherSideInResetFlag = MU_SR_RS_MASK /*!< The other side is in reset. */ |
| #endif |
| |
| #if (defined(FSL_FEATURE_MU_HAS_SR_MURIP) && FSL_FEATURE_MU_HAS_SR_MURIP) |
| kMU_MuResetInterruptFlag = MU_SR_MURIP_MASK, /*!< The other side initializes MU reset. */ |
| #endif |
| #if (defined(FSL_FEATURE_MU_HAS_SR_HRIP) && FSL_FEATURE_MU_HAS_SR_HRIP) |
| kMU_HardwareResetInterruptFlag = MU_SR_HRIP_MASK, /*!< Current side has been hardware reset by the other side. */ |
| #endif |
| }; |
| |
| /*! |
| * @brief MU interrupt source to enable. |
| */ |
| enum _mu_interrupt_enable |
| { |
| kMU_Tx0EmptyInterruptEnable = (1U << (MU_CR_TIEn_SHIFT + 3U)), /*!< TX0 empty. */ |
| kMU_Tx1EmptyInterruptEnable = (1U << (MU_CR_TIEn_SHIFT + 2U)), /*!< TX1 empty. */ |
| kMU_Tx2EmptyInterruptEnable = (1U << (MU_CR_TIEn_SHIFT + 1U)), /*!< TX2 empty. */ |
| kMU_Tx3EmptyInterruptEnable = (1U << (MU_CR_TIEn_SHIFT + 0U)), /*!< TX3 empty. */ |
| |
| kMU_Rx0FullInterruptEnable = (1U << (MU_CR_RIEn_SHIFT + 3U)), /*!< RX0 full. */ |
| kMU_Rx1FullInterruptEnable = (1U << (MU_CR_RIEn_SHIFT + 2U)), /*!< RX1 full. */ |
| kMU_Rx2FullInterruptEnable = (1U << (MU_CR_RIEn_SHIFT + 1U)), /*!< RX2 full. */ |
| kMU_Rx3FullInterruptEnable = (1U << (MU_CR_RIEn_SHIFT + 0U)), /*!< RX3 full. */ |
| |
| kMU_GenInt0InterruptEnable = (1U << (MU_CR_GIEn_SHIFT + 3U)), /*!< General purpose interrupt 0. */ |
| kMU_GenInt1InterruptEnable = (1U << (MU_CR_GIEn_SHIFT + 2U)), /*!< General purpose interrupt 1. */ |
| kMU_GenInt2InterruptEnable = (1U << (MU_CR_GIEn_SHIFT + 1U)), /*!< General purpose interrupt 2. */ |
| kMU_GenInt3InterruptEnable = (1U << (MU_CR_GIEn_SHIFT + 0U)), /*!< General purpose interrupt 3. */ |
| |
| #if (defined(FSL_FEATURE_MU_HAS_RESET_INT) && FSL_FEATURE_MU_HAS_RESET_INT) |
| kMU_ResetAssertInterruptEnable = MU_CR_RAIE_MASK, /*!< The other core reset assert interrupt. */ |
| kMU_ResetDeassertInterruptEnable = MU_CR_RDIE_MASK, /*!< The other core reset de-assert interrupt. */ |
| #endif |
| #if (defined(FSL_FEATURE_MU_HAS_SR_MURIP) && FSL_FEATURE_MU_HAS_SR_MURIP) |
| kMU_MuResetInterruptEnable = MU_CR_MURIE_MASK, /*!< The other side initializes MU reset. The interrupt |
| is ORed with the general purpose interrupt 3. The |
| general purpose interrupt 3 is issued when the other side |
| set the MU reset and this interrupt is enabled. */ |
| #endif |
| #if (defined(FSL_FEATURE_MU_HAS_SR_HRIP) && FSL_FEATURE_MU_HAS_SR_HRIP) |
| kMU_HardwareResetInterruptEnable = MU_CR_HRIE_MASK, /*!< Current side has been hardware reset by the other side. */ |
| #endif |
| }; |
| |
| /*! |
| * @brief MU interrupt that could be triggered to the other core. |
| */ |
| enum _mu_interrupt_trigger |
| { |
| kMU_NmiInterruptTrigger = MU_CR_NMI_MASK, /*!< NMI interrupt. */ |
| kMU_GenInt0InterruptTrigger = (1U << (MU_CR_GIRn_SHIFT + 3U)), /*!< General purpose interrupt 0. */ |
| kMU_GenInt1InterruptTrigger = (1U << (MU_CR_GIRn_SHIFT + 2U)), /*!< General purpose interrupt 1. */ |
| kMU_GenInt2InterruptTrigger = (1U << (MU_CR_GIRn_SHIFT + 1U)), /*!< General purpose interrupt 2. */ |
| kMU_GenInt3InterruptTrigger = (1U << (MU_CR_GIRn_SHIFT + 0U)) /*!< General purpose interrupt 3. */ |
| }; |
| |
| /******************************************************************************* |
| * API |
| ******************************************************************************/ |
| |
| #if defined(__cplusplus) |
| extern "C" { |
| #endif |
| |
| /*! |
| * @name MU initialization. |
| * @{ |
| */ |
| /*! |
| * @brief Initializes the MU module. |
| * |
| * This function enables the MU clock only. |
| * |
| * @param base MU peripheral base address. |
| */ |
| void MU_Init(MU_Type *base); |
| |
| /*! |
| * @brief De-initializes the MU module. |
| * |
| * This function disables the MU clock only. |
| * |
| * @param base MU peripheral base address. |
| */ |
| void MU_Deinit(MU_Type *base); |
| |
| /* @} */ |
| |
| /*! |
| * @name MU Message |
| * @{ |
| */ |
| |
| /*! |
| * @brief Writes a message to the TX register. |
| * |
| * This function writes a message to the specific TX register. It does not check |
| * whether the TX register is empty or not. The upper layer should make sure the TX |
| * register is empty before calling this function. This function can be used |
| * in ISR for better performance. |
| * |
| * @code |
| * while (!(kMU_Tx0EmptyFlag & MU_GetStatusFlags(base))) { } // Wait for TX0 register empty. |
| * MU_SendMsgNonBlocking(base, 0U, MSG_VAL); // Write message to the TX0 register. |
| * @endcode |
| * |
| * @param base MU peripheral base address. |
| * @param regIndex TX register index. |
| * @param msg Message to send. |
| */ |
| static inline void MU_SendMsgNonBlocking(MU_Type *base, uint32_t regIndex, uint32_t msg) |
| { |
| assert(regIndex < MU_TR_COUNT); |
| |
| base->TR[regIndex] = msg; |
| } |
| |
| /*! |
| * @brief Blocks to send a message. |
| * |
| * This function waits until the TX register is empty and sends the message. |
| * |
| * @param base MU peripheral base address. |
| * @param regIndex TX register index. |
| * @param msg Message to send. |
| */ |
| void MU_SendMsg(MU_Type *base, uint32_t regIndex, uint32_t msg); |
| |
| /*! |
| * @brief Reads a message from the RX register. |
| * |
| * This function reads a message from the specific RX register. It does not check |
| * whether the RX register is full or not. The upper layer should make sure the RX |
| * register is full before calling this function. This function can be used |
| * in ISR for better performance. |
| * |
| * @code |
| * uint32_t msg; |
| * while (!(kMU_Rx0FullFlag & MU_GetStatusFlags(base))) |
| * { |
| * } // Wait for the RX0 register full. |
| * |
| * msg = MU_ReceiveMsgNonBlocking(base, 0U); // Read message from RX0 register. |
| * @endcode |
| * |
| * @param base MU peripheral base address. |
| * @param regIndex TX register index. |
| * @return The received message. |
| */ |
| static inline uint32_t MU_ReceiveMsgNonBlocking(MU_Type *base, uint32_t regIndex) |
| { |
| assert(regIndex < MU_TR_COUNT); |
| |
| return base->RR[regIndex]; |
| } |
| |
| /*! |
| * @brief Blocks to receive a message. |
| * |
| * This function waits until the RX register is full and receives the message. |
| * |
| * @param base MU peripheral base address. |
| * @param regIndex RX register index. |
| * @return The received message. |
| */ |
| uint32_t MU_ReceiveMsg(MU_Type *base, uint32_t regIndex); |
| |
| /* @} */ |
| |
| /*! |
| * @name MU Flags |
| * @{ |
| */ |
| |
| /*! |
| * @brief Sets the 3-bit MU flags reflect on the other MU side. |
| * |
| * This function sets the 3-bit MU flags directly. Every time the 3-bit MU flags are changed, |
| * the status flag \c kMU_FlagsUpdatingFlag asserts indicating the 3-bit MU flags are |
| * updating to the other side. After the 3-bit MU flags are updated, the status flag |
| * \c kMU_FlagsUpdatingFlag is cleared by hardware. During the flags updating period, |
| * the flags cannot be changed. The upper layer should make sure the status flag |
| * \c kMU_FlagsUpdatingFlag is cleared before calling this function. |
| * |
| * @code |
| * while (kMU_FlagsUpdatingFlag & MU_GetStatusFlags(base)) |
| * { |
| * } // Wait for previous MU flags updating. |
| * |
| * MU_SetFlagsNonBlocking(base, 0U); // Set the mU flags. |
| * @endcode |
| * |
| * @param base MU peripheral base address. |
| * @param flags The 3-bit MU flags to set. |
| */ |
| static inline void MU_SetFlagsNonBlocking(MU_Type *base, uint32_t flags) |
| { |
| uint32_t reg = base->CR; |
| reg = (reg & ~((MU_CR_GIRn_MASK | MU_CR_NMI_MASK) | MU_CR_Fn_MASK)) | MU_CR_Fn(flags); |
| base->CR = reg; |
| } |
| |
| /*! |
| * @brief Blocks setting the 3-bit MU flags reflect on the other MU side. |
| * |
| * This function blocks setting the 3-bit MU flags. Every time the 3-bit MU flags are changed, |
| * the status flag \c kMU_FlagsUpdatingFlag asserts indicating the 3-bit MU flags are |
| * updating to the other side. After the 3-bit MU flags are updated, the status flag |
| * \c kMU_FlagsUpdatingFlag is cleared by hardware. During the flags updating period, |
| * the flags cannot be changed. This function waits for the MU status flag |
| * \c kMU_FlagsUpdatingFlag cleared and sets the 3-bit MU flags. |
| * |
| * @param base MU peripheral base address. |
| * @param flags The 3-bit MU flags to set. |
| */ |
| void MU_SetFlags(MU_Type *base, uint32_t flags); |
| |
| /*! |
| * @brief Gets the current value of the 3-bit MU flags set by the other side. |
| * |
| * This functions gets the current 3-bit MU flags on the current side. |
| * |
| * @param base MU peripheral base address. |
| * @return flags Current value of the 3-bit flags. |
| */ |
| static inline uint32_t MU_GetFlags(MU_Type *base) |
| { |
| return (base->SR & MU_SR_Fn_MASK) >> MU_SR_Fn_SHIFT; |
| } |
| |
| /* @} */ |
| |
| /*! |
| * @name Status and Interrupt. |
| * @{ |
| */ |
| |
| /*! |
| * @brief Gets the MU status flags. |
| * |
| * This function returns the bit mask of the MU status flags. See _mu_status_flags. |
| * |
| * @code |
| * uint32_t flags; |
| * flags = MU_GetStatusFlags(base); // Get all status flags. |
| * if (kMU_Tx0EmptyFlag & flags) |
| * { |
| * // The TX0 register is empty. Message can be sent. |
| * MU_SendMsgNonBlocking(base, 0U, MSG0_VAL); |
| * } |
| * if (kMU_Tx1EmptyFlag & flags) |
| * { |
| * // The TX1 register is empty. Message can be sent. |
| * MU_SendMsgNonBlocking(base, 1U, MSG1_VAL); |
| * } |
| * @endcode |
| * |
| * @param base MU peripheral base address. |
| * @return Bit mask of the MU status flags, see _mu_status_flags. |
| */ |
| static inline uint32_t MU_GetStatusFlags(MU_Type *base) |
| { |
| return (base->SR & (MU_SR_TEn_MASK | MU_SR_RFn_MASK | MU_SR_GIPn_MASK | MU_SR_EP_MASK | MU_SR_FUP_MASK |
| #if (defined(FSL_FEATURE_MU_HAS_SR_RS) && FSL_FEATURE_MU_HAS_SR_RS) |
| | MU_SR_RS_MASK |
| #endif |
| #if (defined(FSL_FEATURE_MU_HAS_RESET_INT) && FSL_FEATURE_MU_HAS_RESET_INT) |
| | MU_SR_RDIP_MASK | MU_SR_RAIP_MASK |
| #endif |
| #if (defined(FSL_FEATURE_MU_HAS_SR_MURIP) && FSL_FEATURE_MU_HAS_SR_MURIP) |
| | MU_SR_MURIP_MASK |
| #endif |
| #if (defined(FSL_FEATURE_MU_HAS_SR_HRIP) && FSL_FEATURE_MU_HAS_SR_HRIP) |
| | MU_SR_HRIP_MASK |
| #endif |
| )); |
| } |
| |
| /*! |
| * @brief Clears the specific MU status flags. |
| * |
| * This function clears the specific MU status flags. The flags to clear should |
| * be passed in as bit mask. See _mu_status_flags. |
| * |
| * @code |
| * //Clear general interrupt 0 and general interrupt 1 pending flags. |
| * MU_ClearStatusFlags(base, kMU_GenInt0Flag | kMU_GenInt1Flag); |
| * @endcode |
| * |
| * @param base MU peripheral base address. |
| * @param mask Bit mask of the MU status flags. See _mu_status_flags. The following |
| * flags are cleared by hardware, this function could not clear them. |
| * - kMU_Tx0EmptyFlag |
| * - kMU_Tx1EmptyFlag |
| * - kMU_Tx2EmptyFlag |
| * - kMU_Tx3EmptyFlag |
| * - kMU_Rx0FullFlag |
| * - kMU_Rx1FullFlag |
| * - kMU_Rx2FullFlag |
| * - kMU_Rx3FullFlag |
| * - kMU_EventPendingFlag |
| * - kMU_FlagsUpdatingFlag |
| * - kMU_OtherSideInResetFlag |
| */ |
| static inline void MU_ClearStatusFlags(MU_Type *base, uint32_t mask) |
| { |
| /* regMask is the mask of w1c status bits. */ |
| uint32_t regMask = MU_SR_GIPn_MASK; |
| |
| #if (defined(FSL_FEATURE_MU_HAS_RESET_INT) && FSL_FEATURE_MU_HAS_RESET_INT) |
| regMask |= (MU_SR_RDIP_MASK | MU_SR_RAIP_MASK); |
| #endif |
| |
| #if (defined(FSL_FEATURE_MU_HAS_SR_MURIP) && FSL_FEATURE_MU_HAS_SR_MURIP) |
| regMask |= MU_SR_MURIP_MASK; |
| #endif |
| |
| #if (defined(FSL_FEATURE_MU_HAS_SR_HRIP) && FSL_FEATURE_MU_HAS_SR_HRIP) |
| regMask |= MU_SR_HRIP_MASK; |
| #endif |
| |
| base->SR = (mask & regMask); |
| } |
| |
| /*! |
| * @brief Enables the specific MU interrupts. |
| * |
| * This function enables the specific MU interrupts. The interrupts to enable |
| * should be passed in as bit mask. See _mu_interrupt_enable. |
| * |
| * @code |
| * // Enable general interrupt 0 and TX0 empty interrupt. |
| * MU_EnableInterrupts(base, kMU_GenInt0InterruptEnable | kMU_Tx0EmptyInterruptEnable); |
| * @endcode |
| * |
| * @param base MU peripheral base address. |
| * @param mask Bit mask of the MU interrupts. See _mu_interrupt_enable. |
| */ |
| static inline void MU_EnableInterrupts(MU_Type *base, uint32_t mask) |
| { |
| uint32_t reg = base->CR; |
| reg = (reg & ~(MU_CR_GIRn_MASK | MU_CR_NMI_MASK)) | mask; |
| base->CR = reg; |
| } |
| |
| /*! |
| * @brief Disables the specific MU interrupts. |
| * |
| * This function disables the specific MU interrupts. The interrupts to disable |
| * should be passed in as bit mask. See _mu_interrupt_enable. |
| * |
| * @code |
| * // Disable general interrupt 0 and TX0 empty interrupt. |
| * MU_DisableInterrupts(base, kMU_GenInt0InterruptEnable | kMU_Tx0EmptyInterruptEnable); |
| * @endcode |
| * |
| * @param base MU peripheral base address. |
| * @param mask Bit mask of the MU interrupts. See _mu_interrupt_enable. |
| */ |
| static inline void MU_DisableInterrupts(MU_Type *base, uint32_t mask) |
| { |
| uint32_t reg = base->CR; |
| reg &= ~((MU_CR_GIRn_MASK | MU_CR_NMI_MASK) | mask); |
| base->CR = reg; |
| } |
| |
| /*! |
| * @brief Triggers interrupts to the other core. |
| * |
| * This function triggers the specific interrupts to the other core. The interrupts |
| * to trigger are passed in as bit mask. See \ref _mu_interrupt_trigger. |
| * The MU should not trigger an interrupt to the other core when the previous interrupt |
| * has not been processed by the other core. This function checks whether the |
| * previous interrupts have been processed. If not, it returns an error. |
| * |
| * @code |
| * if (kStatus_Success != MU_TriggerInterrupts(base, kMU_GenInt0InterruptTrigger | kMU_GenInt2InterruptTrigger)) |
| * { |
| * // Previous general purpose interrupt 0 or general purpose interrupt 2 |
| * // has not been processed by the other core. |
| * } |
| * @endcode |
| * |
| * @param base MU peripheral base address. |
| * @param mask Bit mask of the interrupts to trigger. See _mu_interrupt_trigger. |
| * @retval kStatus_Success Interrupts have been triggered successfully. |
| * @retval kStatus_Fail Previous interrupts have not been accepted. |
| */ |
| status_t MU_TriggerInterrupts(MU_Type *base, uint32_t mask); |
| |
| /*! |
| * @brief Clear non-maskable interrupt (NMI) sent by the other core. |
| * |
| * This functions clears non-maskable interrupt (NMI) sent by the other core. |
| * |
| * @param base MU peripheral base address. |
| */ |
| static inline void MU_ClearNmi(MU_Type *base) |
| { |
| base->SR = MU_SR_NMIC_MASK; |
| } |
| |
| /* @} */ |
| |
| /*! |
| * @name MU misc functions |
| * @{ |
| */ |
| |
| /*! |
| * @brief Boots the core at B side. |
| * |
| * This function sets the B side core's boot configuration and releases the |
| * core from reset. |
| * |
| * @param base MU peripheral base address. |
| * @param mode Core B boot mode. |
| * @note Only MU side A can use this function. |
| */ |
| void MU_BootCoreB(MU_Type *base, mu_core_boot_mode_t mode); |
| |
| /*! |
| * @brief Holds the core reset of B side. |
| * |
| * This function causes the core of B side to be held in reset following any reset event. |
| * |
| * @param base MU peripheral base address. |
| * @note Only A side could call this function. |
| */ |
| static inline void MU_HoldCoreBReset(MU_Type *base) |
| { |
| #if (defined(FSL_FEATURE_MU_HAS_CCR) && FSL_FEATURE_MU_HAS_CCR) |
| base->CCR |= MU_CCR_RSTH_MASK; |
| #else /* FSL_FEATURE_MU_HAS_CCR */ |
| uint32_t reg = base->CR; |
| reg = (reg & ~(MU_CR_GIRn_MASK | MU_CR_NMI_MASK)) | MU_CR_RSTH_MASK; |
| base->CR = reg; |
| #endif /* FSL_FEATURE_MU_HAS_CCR */ |
| } |
| |
| /*! |
| * @brief Boots the other core. |
| * |
| * This function boots the other core with a boot configuration. |
| * |
| * @param base MU peripheral base address. |
| * @param mode The other core boot mode. |
| */ |
| void MU_BootOtherCore(MU_Type *base, mu_core_boot_mode_t mode); |
| |
| /*! |
| * @brief Holds the other core reset. |
| * |
| * This function causes the other core to be held in reset following any reset event. |
| * |
| * @param base MU peripheral base address. |
| */ |
| static inline void MU_HoldOtherCoreReset(MU_Type *base) |
| { |
| /* |
| * MU_HoldOtherCoreReset and MU_HoldCoreBReset are the same, MU_HoldCoreBReset |
| * is kept for compatible with older platforms. |
| */ |
| MU_HoldCoreBReset(base); |
| } |
| |
| /*! |
| * @brief Resets the MU for both A side and B side. |
| * |
| * This function resets the MU for both A side and B side. Before reset, it is |
| * recommended to interrupt processor B, because this function may affect the |
| * ongoing processor B programs. |
| * |
| * @param base MU peripheral base address. |
| * @note For some platforms, only MU side A could use this function, check |
| * reference manual for details. |
| */ |
| static inline void MU_ResetBothSides(MU_Type *base) |
| { |
| uint32_t reg = base->CR; |
| reg = (reg & ~(MU_CR_GIRn_MASK | MU_CR_NMI_MASK)) | MU_CR_MUR_MASK; |
| base->CR = reg; |
| |
| #if (defined(FSL_FEATURE_MU_HAS_SR_RS) && FSL_FEATURE_MU_HAS_SR_RS) |
| /* Wait for the other side out of reset. */ |
| while (base->SR & MU_SR_RS_MASK) |
| { |
| } |
| #endif /* FSL_FEATURE_MU_HAS_SR_RS */ |
| } |
| |
| #if (defined(FSL_FEATURE_MU_HAS_CCR) && FSL_FEATURE_MU_HAS_CCR) |
| /*! |
| * @brief Mask hardware reset by the other core. |
| * |
| * The other core could call MU_HardwareResetOtherCore() to reset current core. |
| * To mask the reset, call this function and pass in true. |
| * |
| * @param base MU peripheral base address. |
| * @param mask Pass true to mask the hardware reset, pass false to unmask it. |
| */ |
| static inline void MU_MaskHardwareReset(MU_Type *base, bool mask) |
| { |
| if (mask) |
| { |
| base->CCR |= MU_CCR_HRM_MASK; |
| } |
| else |
| { |
| base->CCR &= ~MU_CCR_HRM_MASK; |
| } |
| } |
| #endif |
| |
| /*! |
| * @brief Hardware reset the other core. |
| * |
| * This function resets the other core, the other core could mask the |
| * hardware reset by calling @ref MU_MaskHardwareReset. The hardware reset |
| * mask feature is only available for some platforms. |
| * This function could be used together with MU_BootOtherCore to control the |
| * other core reset workflow. |
| * |
| * Example 1: Reset the other core, and no hold reset |
| * @code |
| * MU_HardwareResetOtherCore(MU_A, true, false, bootMode); |
| * @endcode |
| * In this example, the core at MU side B will reset with the specified boot mode. |
| * |
| * Example 2: Reset the other core and hold it, then boot the other core later. |
| * @code |
| * // Here the other core enters reset, and the reset is hold |
| * MU_HardwareResetOtherCore(MU_A, true, true, modeDontCare); |
| * // Current core boot the other core when necessary. |
| * MU_BootOtherCore(MU_A, bootMode); |
| * @endcode |
| * |
| * @param base MU peripheral base address. |
| * @param waitReset Wait the other core enters reset. |
| * - true: Wait until the other core enters reset, if the other |
| * core has masked the hardware reset, then this function will |
| * be blocked. |
| * - false: Don't wait the reset. |
| * @param holdReset Hold the other core reset or not. |
| * - true: Hold the other core in reset, this function returns |
| * directly when the other core enters reset. |
| * - false: Don't hold the other core in reset, this function |
| * waits until the other core out of reset. |
| * @param bootMode Boot mode of the other core, if @p holdReset is true, this |
| * parameter is useless. |
| */ |
| void MU_HardwareResetOtherCore(MU_Type *base, bool waitReset, bool holdReset, mu_core_boot_mode_t bootMode); |
| |
| /*! |
| * @brief Enables or disables the clock on the other core. |
| * |
| * This function enables or disables the platform clock on the other core when |
| * that core enters a stop mode. If disabled, the platform clock for the other |
| * core is disabled when it enters stop mode. If enabled, the platform clock |
| * keeps running on the other core in stop mode, until this core also enters |
| * stop mode. |
| * |
| * @param base MU peripheral base address. |
| * @param enable Enable or disable the clock on the other core. |
| */ |
| static inline void MU_SetClockOnOtherCoreEnable(MU_Type *base, bool enable) |
| { |
| #if (defined(FSL_FEATURE_MU_HAS_CCR) && FSL_FEATURE_MU_HAS_CCR) |
| if (enable) |
| { |
| base->CCR |= MU_CCR_CLKE_MASK; |
| } |
| else |
| { |
| base->CCR &= ~MU_CCR_CLKE_MASK; |
| } |
| #else /* FSL_FEATURE_MU_HAS_CCR */ |
| uint32_t reg = base->CR; |
| |
| reg &= ~(MU_CR_GIRn_MASK | MU_CR_NMI_MASK); |
| |
| if (enable) |
| { |
| reg |= MU_CR_CLKE_MASK; |
| } |
| else |
| { |
| reg &= ~MU_CR_CLKE_MASK; |
| } |
| |
| base->CR = reg; |
| #endif /* FSL_FEATURE_MU_HAS_CCR */ |
| } |
| |
| /*! |
| * @brief Gets the power mode of the other core. |
| * |
| * This function gets the power mode of the other core. |
| * |
| * @param base MU peripheral base address. |
| * @return Power mode of the other core. |
| */ |
| static inline mu_power_mode_t MU_GetOtherCorePowerMode(MU_Type *base) |
| { |
| return (mu_power_mode_t)((base->SR & MU_SR_PM_MASK) >> MU_SR_PM_SHIFT); |
| } |
| |
| /* @} */ |
| |
| #if defined(__cplusplus) |
| } |
| #endif /*_cplusplus*/ |
| /*@}*/ |
| |
| #endif /* _FSL_MU_H_*/ |