| .. _mcux_acmp: |
| |
| NXP MCUX Analog Comparator (ACMP) |
| ################################# |
| |
| Overview |
| ******** |
| |
| This sample show how to use the NXP MCUX Analog Comparator (ACMP) driver. The |
| sample supports the :ref:`twr_ke18f`, :ref:`mimxrt1170_evk`. |
| |
| The input voltage for the the negative input of the analog comparator is |
| provided by the ACMP Digital-to-Analog Converter (DAC). The input voltage for |
| the positive input can be adjusted by turning the on-board potentiometer for |
| :ref:`twr_ke18f` board, for :ref:`mimxrt1170_evk` the voltage signal is |
| captured on J25-13, need change the external voltage signal to check the |
| output. |
| |
| The output value of the analog comparator is reported on the console. |
| |
| Building and Running |
| ******************** |
| |
| Building and Running for TWR-KE18F |
| ================================== |
| Build the application for the :ref:`twr_ke18f` board, and adjust the |
| ACMP input voltage by turning the on-board potentiometer. |
| |
| .. zephyr-app-commands:: |
| :zephyr-app: samples/drivers/mcux_acmp |
| :board: twr_ke18f |
| :goals: flash |
| :compact: |
| |
| Building and Running for MIMXRT1170-EVK |
| ======================================= |
| Build the application for the MIMXRT1170-EVK board, and adjust the |
| ACMP input voltage by changing the voltage input to J25-13. |
| |
| .. zephyr-app-commands:: |
| :zephyr-app: samples/drivers/mcux_acmp |
| :board: mimxrt1170_evk_cm7 |
| :goals: flash |
| :compact: |