drivers/ethernet/eth_dw.c - third_party/github/zephyrproject-rtos/zephyr - Git at Google

 /*
  * Copyright (c) 2015 Intel Corporation.
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *     http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
 #include <nanokernel.h>
 #include <sys_io.h>
 #include <board.h>
 #include <init.h>
 #include <string.h>
 #include <stdio.h>
 #include <stdbool.h>
 #include "eth_dw_priv.h"
 #include <net/ip/net_driver_ethernet.h>
 #include <misc/__assert.h>
 #include <errno.h>

 #ifdef CONFIG_SHARED_IRQ
 #include <shared_irq.h>
 #endif

 #define SYS_LOG_DOMAIN "ETH DW"
 #define SYS_LOG_LEVEL CONFIG_SYS_LOG_ETHERNET_LEVEL
 #include <misc/sys_log.h>

 static inline uint32_t eth_read(uint32_t base_addr, uint32_t offset)
 {
 	return sys_read32(base_addr + offset);
 }

 static inline void eth_write(uint32_t base_addr, uint32_t offset,
 			     uint32_t val)
 {
 	sys_write32(val, base_addr + offset);
 }

 static void eth_rx(struct device *port)
 {
 	struct eth_runtime *context = port->driver_data;
 	struct eth_config *config = port->config->config_info;
 	uint32_t base_addr = config->base_addr;
 	struct net_buf *buf;
 	uint32_t frm_len = 0;

 	/* Check whether the RX descriptor is still owned by the device.  If not,
 	 * process the received frame or an error that may have occurred.
 	 */
 	if (context->rx_desc.own == 1) {
 		SYS_LOG_ERR("Spurious receive interrupt from Ethernet MAC.\n");
 		return;
 	}

 	if (!net_driver_ethernet_is_opened()) {
 		goto release_desc;
 	}

 	if (context->rx_desc.err_summary) {
 		SYS_LOG_ERR("Error receiving frame: RDES0 = %08x, RDES1 = %08x.\n",
 			context->rx_desc.rdes0, context->rx_desc.rdes1);
 		goto release_desc;
 	}

 	frm_len = context->rx_desc.frm_len;
 	if (frm_len > UIP_BUFSIZE) {
 		SYS_LOG_ERR("Frame too large: %u.\n", frm_len);
 		goto release_desc;
 	}

 	buf = ip_buf_get_reserve_rx(0);
 	if (buf == NULL) {
 		SYS_LOG_ERR("Failed to obtain RX buffer.\n");
 		goto release_desc;
 	}

 	memcpy(net_buf_add(buf, frm_len), (void *)context->rx_buf, frm_len);
 	uip_len(buf) = frm_len;

 	net_driver_ethernet_recv(buf);

 release_desc:
 	/* Return ownership of the RX descriptor to the device. */
 	context->rx_desc.own = 1;

 	/* Request that the device check for an available RX descriptor, since
 	 * ownership of the descriptor was just transferred to the device.
 	 */
 	eth_write(base_addr, REG_ADDR_RX_POLL_DEMAND, 1);
 }

 /* @brief Transmit the current Ethernet frame.
  *
  *        This procedure will block indefinitely until the Ethernet device is
  *        ready to accept a new outgoing frame.  It then copies the current
  *        Ethernet frame from the global uip_buf buffer to the device DMA
  *        buffer and signals to the device that a new frame is available to be
  *        transmitted.
  */
 static int eth_tx(struct device *port, struct net_buf *buf)
 {
 	struct eth_runtime *context = port->driver_data;
 	struct eth_config *config = port->config->config_info;
 	uint32_t base_addr = config->base_addr;

 	/* Wait until the TX descriptor is no longer owned by the device. */
 	while (context->tx_desc.own == 1) {
 	}

 #ifdef CONFIG_ETHERNET_DEBUG
 	/* Check whether an error occurred transmitting the previous frame. */
 	if (context->tx_desc.err_summary) {
 		SYS_LOG_ERR("Error transmitting frame: TDES0 = %08x, TDES1 = %08x.\n",
 			context->tx_desc.tdes0, context->tx_desc.tdes1);
 	}
 #endif

 	/* Transmit the next frame. */
 	if (uip_len(buf) > UIP_BUFSIZE) {
 		SYS_LOG_ERR("Frame too large to TX: %u\n", uip_len(buf));

 		return -1;
 	}

 	memcpy((void *)context->tx_buf, uip_buf(buf), uip_len(buf));

 	context->tx_desc.tx_buf1_sz = uip_len(buf);

 	context->tx_desc.own = 1;

 	/* Request that the device check for an available TX descriptor, since
 	 * ownership of the descriptor was just transferred to the device.
 	 */
 	eth_write(base_addr, REG_ADDR_TX_POLL_DEMAND, 1);

 	return 1;
 }

 void eth_dw_isr(struct device *port)
 {
 	struct eth_config *config = port->config->config_info;
 	uint32_t base_addr = config->base_addr;
 	uint32_t int_status;

 	int_status = eth_read(base_addr, REG_ADDR_STATUS);

 #ifdef CONFIG_SHARED_IRQ
 	/* If using with shared IRQ, this function will be called
 	 * by the shared IRQ driver. So check here if the interrupt
 	 * is coming from the GPIO controller (or somewhere else).
 	 */
 	if ((int_status & STATUS_RX_INT) == 0) {
 		return;
 	}
 #endif

 	eth_rx(port);

 	/* Acknowledge the interrupt. */
 	eth_write(base_addr, REG_ADDR_STATUS, STATUS_NORMAL_INT | STATUS_RX_INT);
 }

 #ifdef CONFIG_PCI
 static inline int eth_setup(struct device *dev)
 {
 	struct eth_config *config = dev->config->config_info;

 	pci_bus_scan_init();

 	if (!pci_bus_scan(&config->pci_dev))
 		return 0;

 #ifdef CONFIG_PCI_ENUMERATION
 	config->base_addr = config->pci_dev.addr;
 	config->irq_num = config->pci_dev.irq;
 #endif
 	pci_enable_regs(&config->pci_dev);
 	pci_enable_bus_master(&config->pci_dev);

 	pci_show(&config->pci_dev);

 	return 1;
 }
 #else
 #define eth_setup(_unused_) (1)
 #endif /* CONFIG_PCI */

 static int eth_net_tx(struct net_buf *buf);

 static int eth_initialize(struct device *port)
 {
 	struct eth_runtime *context = port->driver_data;
 	struct eth_config *config = port->config->config_info;
 	uint32_t base_addr;

 	union {
 		struct {
 			uint8_t bytes[6];
 			uint8_t pad[2];
 		} __attribute__((packed));
 		uint32_t words[2];
 	} mac_addr;

 	if (!eth_setup(port))
 		return -EPERM;

 	base_addr = config->base_addr;

 	/* Read the MAC address from the device. */
 	mac_addr.words[1] = eth_read(base_addr, REG_ADDR_MACADDR_HI);
 	mac_addr.words[0] = eth_read(base_addr, REG_ADDR_MACADDR_LO);

 	net_set_mac(mac_addr.bytes, sizeof(mac_addr.bytes));

 	/* Initialize transmit descriptor. */
 	context->tx_desc.tdes0 = 0;
 	context->tx_desc.tdes1 = 0;

 	context->tx_desc.buf1_ptr = (uint8_t *)context->tx_buf;
 	context->tx_desc.tx_end_of_ring = 1;
 	context->tx_desc.first_seg_in_frm = 1;
 	context->tx_desc.last_seg_in_frm = 1;
 	context->tx_desc.tx_end_of_ring = 1;

 	/* Initialize receive descriptor. */
 	context->rx_desc.rdes0 = 0;
 	context->rx_desc.rdes1 = 0;

 	context->rx_desc.buf1_ptr = (uint8_t *)context->rx_buf;
 	context->rx_desc.own = 1;
 	context->rx_desc.first_desc = 1;
 	context->rx_desc.last_desc = 1;
 	context->rx_desc.rx_buf1_sz = UIP_BUFSIZE;
 	context->rx_desc.rx_end_of_ring = 1;

 	/* Install transmit and receive descriptors. */
 	eth_write(base_addr, REG_ADDR_RX_DESC_LIST, (uint32_t)&context->rx_desc);
 	eth_write(base_addr, REG_ADDR_TX_DESC_LIST, (uint32_t)&context->tx_desc);

 	eth_write(base_addr, REG_ADDR_MAC_CONF,
 		  /* Set the RMII speed to 100Mbps */
 		  MAC_CONF_14_RMII_100M |
 		  /* Enable full-duplex mode */
 		  MAC_CONF_11_DUPLEX |
 		  /* Enable transmitter */
 		  MAC_CONF_3_TX_EN |
 		  /* Enable receiver */
 		  MAC_CONF_2_RX_EN);

 	eth_write(base_addr, REG_ADDR_INT_ENABLE,
 		  INT_ENABLE_NORMAL |
 		  /* Enable receive interrupts */
 		  INT_ENABLE_RX);

 	/* Mask all the MMC interrupts */
 	eth_write(base_addr, REG_MMC_RX_INTR_MASK, MMC_DEFAULT_MASK);
 	eth_write(base_addr, REG_MMC_TX_INTR_MASK, MMC_DEFAULT_MASK);
 	eth_write(base_addr, REG_MMC_RX_IPC_INTR_MASK, MMC_DEFAULT_MASK);

 	eth_write(base_addr, REG_ADDR_DMA_OPERATION,
 		  /* Enable receive store-and-forward mode for simplicity. */
 		  OP_MODE_25_RX_STORE_N_FORWARD |
 		  /* Enable transmit store-and-forward mode for simplicity. */
 		  OP_MODE_21_TX_STORE_N_FORWARD |
 		  /* Place the transmitter state machine in the Running state. */
 		  OP_MODE_13_START_TX |
 		  /* Place the receiver state machine in the Running state. */
 		  OP_MODE_1_START_RX);

 	SYS_LOG_INF("Enabled 100M full-duplex mode.");

 	net_driver_ethernet_register_tx(eth_net_tx);

 	config->config_func(port);

 	return 0;
 }

 /* Bindings to the plaform */
 #if CONFIG_ETH_DW_0
 static void eth_config_0_irq(struct device *port);

 static struct eth_config eth_config_0 = {
 	.base_addr		= ETH_DW_0_BASE_ADDR,
 #ifdef CONFIG_ETH_DW_0_IRQ_DIRECT
 	.irq_num		= ETH_DW_0_IRQ,
 #endif
 #if CONFIG_PCI
 	.pci_dev.class_type	= ETH_DW_PCI_CLASS,
 	.pci_dev.bus		= ETH_DW_0_PCI_BUS,
 	.pci_dev.dev		= ETH_DW_0_PCI_DEV,
 	.pci_dev.vendor_id	= ETH_DW_PCI_VENDOR_ID,
 	.pci_dev.device_id	= ETH_DW_PCI_DEVICE_ID,
 	.pci_dev.function	= ETH_DW_0_PCI_FUNCTION,
 	.pci_dev.bar		= ETH_DW_0_PCI_BAR,
 #endif
 	.config_func		= eth_config_0_irq,

 #ifdef CONFIG_ETH_DW_0_IRQ_SHARED
 	.shared_irq_dev_name	= CONFIG_ETH_DW_0_IRQ_SHARED_NAME,
 #endif
 };

 static struct eth_runtime eth_0_runtime;

 DEVICE_INIT(eth_dw_0, CONFIG_ETH_DW_0_NAME, eth_initialize,
 				&eth_0_runtime, &eth_config_0,
 				NANOKERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE);

 static int eth_net_tx(struct net_buf *buf)
 {
 	return eth_tx(DEVICE_GET(eth_dw_0), buf);
 }

 static void eth_config_0_irq(struct device *port)
 {
 	struct eth_config *config = port->config->config_info;
 	struct device *shared_irq_dev;

 #ifdef CONFIG_ETH_DW_0_IRQ_DIRECT
 	ARG_UNUSED(shared_irq_dev);
 	IRQ_CONNECT(ETH_DW_0_IRQ, CONFIG_ETH_DW_0_IRQ_PRI, eth_dw_isr,
 		    DEVICE_GET(eth_dw_0), 0);
 	irq_enable(ETH_DW_0_IRQ);
 #elif defined(CONFIG_ETH_DW_0_IRQ_SHARED)
 	shared_irq_dev = device_get_binding(config->shared_irq_dev_name);
 	__ASSERT(shared_irq_dev != NULL, "Failed to get eth_dw device binding");
 	shared_irq_isr_register(shared_irq_dev, (isr_t)eth_dw_isr, port);
 	shared_irq_enable(shared_irq_dev, port);
 #endif
 }
 #endif  /* CONFIG_ETH_DW_0 */
	/*
	* Copyright (c) 2015 Intel Corporation.
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/
	#include <nanokernel.h>
	#include <sys_io.h>
	#include <board.h>
	#include <init.h>
	#include <string.h>
	#include <stdio.h>
	#include <stdbool.h>
	#include "eth_dw_priv.h"
	#include <net/ip/net_driver_ethernet.h>
	#include <misc/__assert.h>
	#include <errno.h>

	#ifdef CONFIG_SHARED_IRQ
	#include <shared_irq.h>
	#endif

	#define SYS_LOG_DOMAIN "ETH DW"
	#define SYS_LOG_LEVEL CONFIG_SYS_LOG_ETHERNET_LEVEL
	#include <misc/sys_log.h>

	static inline uint32_t eth_read(uint32_t base_addr, uint32_t offset)
	{
	return sys_read32(base_addr + offset);
	}

	static inline void eth_write(uint32_t base_addr, uint32_t offset,
	uint32_t val)
	{
	sys_write32(val, base_addr + offset);
	}

	static void eth_rx(struct device *port)
	{
	struct eth_runtime *context = port->driver_data;
	struct eth_config *config = port->config->config_info;
	uint32_t base_addr = config->base_addr;
	struct net_buf *buf;
	uint32_t frm_len = 0;

	/* Check whether the RX descriptor is still owned by the device. If not,
	* process the received frame or an error that may have occurred.
	*/
	if (context->rx_desc.own == 1) {
	SYS_LOG_ERR("Spurious receive interrupt from Ethernet MAC.\n");
	return;
	}

	if (!net_driver_ethernet_is_opened()) {
	goto release_desc;
	}

	if (context->rx_desc.err_summary) {
	SYS_LOG_ERR("Error receiving frame: RDES0 = %08x, RDES1 = %08x.\n",
	context->rx_desc.rdes0, context->rx_desc.rdes1);
	goto release_desc;
	}

	frm_len = context->rx_desc.frm_len;
	if (frm_len > UIP_BUFSIZE) {
	SYS_LOG_ERR("Frame too large: %u.\n", frm_len);
	goto release_desc;
	}

	buf = ip_buf_get_reserve_rx(0);
	if (buf == NULL) {
	SYS_LOG_ERR("Failed to obtain RX buffer.\n");
	goto release_desc;
	}

	memcpy(net_buf_add(buf, frm_len), (void *)context->rx_buf, frm_len);
	uip_len(buf) = frm_len;

	net_driver_ethernet_recv(buf);

	release_desc:
	/* Return ownership of the RX descriptor to the device. */
	context->rx_desc.own = 1;

	/* Request that the device check for an available RX descriptor, since
	* ownership of the descriptor was just transferred to the device.
	*/
	eth_write(base_addr, REG_ADDR_RX_POLL_DEMAND, 1);
	}

	/* @brief Transmit the current Ethernet frame.
	*
	* This procedure will block indefinitely until the Ethernet device is
	* ready to accept a new outgoing frame. It then copies the current
	* Ethernet frame from the global uip_buf buffer to the device DMA
	* buffer and signals to the device that a new frame is available to be
	* transmitted.
	*/
	static int eth_tx(struct device port, struct net_buf buf)
	{
	struct eth_runtime *context = port->driver_data;
	struct eth_config *config = port->config->config_info;
	uint32_t base_addr = config->base_addr;

	/* Wait until the TX descriptor is no longer owned by the device. */
	while (context->tx_desc.own == 1) {
	}

	#ifdef CONFIG_ETHERNET_DEBUG
	/* Check whether an error occurred transmitting the previous frame. */
	if (context->tx_desc.err_summary) {
	SYS_LOG_ERR("Error transmitting frame: TDES0 = %08x, TDES1 = %08x.\n",
	context->tx_desc.tdes0, context->tx_desc.tdes1);
	}
	#endif

	/* Transmit the next frame. */
	if (uip_len(buf) > UIP_BUFSIZE) {
	SYS_LOG_ERR("Frame too large to TX: %u\n", uip_len(buf));

	return -1;
	}

	memcpy((void *)context->tx_buf, uip_buf(buf), uip_len(buf));

	context->tx_desc.tx_buf1_sz = uip_len(buf);

	context->tx_desc.own = 1;

	/* Request that the device check for an available TX descriptor, since
	* ownership of the descriptor was just transferred to the device.
	*/
	eth_write(base_addr, REG_ADDR_TX_POLL_DEMAND, 1);

	return 1;
	}

	void eth_dw_isr(struct device *port)
	{
	struct eth_config *config = port->config->config_info;
	uint32_t base_addr = config->base_addr;
	uint32_t int_status;

	int_status = eth_read(base_addr, REG_ADDR_STATUS);

	#ifdef CONFIG_SHARED_IRQ
	/* If using with shared IRQ, this function will be called
	* by the shared IRQ driver. So check here if the interrupt
	* is coming from the GPIO controller (or somewhere else).
	*/
	if ((int_status & STATUS_RX_INT) == 0) {
	return;
	}
	#endif

	eth_rx(port);

	/* Acknowledge the interrupt. */
	eth_write(base_addr, REG_ADDR_STATUS, STATUS_NORMAL_INT \| STATUS_RX_INT);
	}

	#ifdef CONFIG_PCI
	static inline int eth_setup(struct device *dev)
	{
	struct eth_config *config = dev->config->config_info;

	pci_bus_scan_init();

	if (!pci_bus_scan(&config->pci_dev))
	return 0;

	#ifdef CONFIG_PCI_ENUMERATION
	config->base_addr = config->pci_dev.addr;
	config->irq_num = config->pci_dev.irq;
	#endif
	pci_enable_regs(&config->pci_dev);
	pci_enable_bus_master(&config->pci_dev);

	pci_show(&config->pci_dev);

	return 1;
	}
	#else
	#define eth_setup(_unused_) (1)
	#endif /* CONFIG_PCI */

	static int eth_net_tx(struct net_buf *buf);

	static int eth_initialize(struct device *port)
	{
	struct eth_runtime *context = port->driver_data;
	struct eth_config *config = port->config->config_info;
	uint32_t base_addr;

	union {
	struct {
	uint8_t bytes[6];
	uint8_t pad[2];
	} __attribute__((packed));
	uint32_t words[2];
	} mac_addr;

	if (!eth_setup(port))
	return -EPERM;

	base_addr = config->base_addr;

	/* Read the MAC address from the device. */
	mac_addr.words[1] = eth_read(base_addr, REG_ADDR_MACADDR_HI);
	mac_addr.words[0] = eth_read(base_addr, REG_ADDR_MACADDR_LO);

	net_set_mac(mac_addr.bytes, sizeof(mac_addr.bytes));

	/* Initialize transmit descriptor. */
	context->tx_desc.tdes0 = 0;
	context->tx_desc.tdes1 = 0;

	context->tx_desc.buf1_ptr = (uint8_t *)context->tx_buf;
	context->tx_desc.tx_end_of_ring = 1;
	context->tx_desc.first_seg_in_frm = 1;
	context->tx_desc.last_seg_in_frm = 1;
	context->tx_desc.tx_end_of_ring = 1;

	/* Initialize receive descriptor. */
	context->rx_desc.rdes0 = 0;
	context->rx_desc.rdes1 = 0;

	context->rx_desc.buf1_ptr = (uint8_t *)context->rx_buf;
	context->rx_desc.own = 1;
	context->rx_desc.first_desc = 1;
	context->rx_desc.last_desc = 1;
	context->rx_desc.rx_buf1_sz = UIP_BUFSIZE;
	context->rx_desc.rx_end_of_ring = 1;

	/* Install transmit and receive descriptors. */
	eth_write(base_addr, REG_ADDR_RX_DESC_LIST, (uint32_t)&context->rx_desc);
	eth_write(base_addr, REG_ADDR_TX_DESC_LIST, (uint32_t)&context->tx_desc);

	eth_write(base_addr, REG_ADDR_MAC_CONF,
	/* Set the RMII speed to 100Mbps */
	MAC_CONF_14_RMII_100M \|
	/* Enable full-duplex mode */
	MAC_CONF_11_DUPLEX \|
	/* Enable transmitter */
	MAC_CONF_3_TX_EN \|
	/* Enable receiver */
	MAC_CONF_2_RX_EN);

	eth_write(base_addr, REG_ADDR_INT_ENABLE,
	INT_ENABLE_NORMAL \|
	/* Enable receive interrupts */
	INT_ENABLE_RX);

	/* Mask all the MMC interrupts */
	eth_write(base_addr, REG_MMC_RX_INTR_MASK, MMC_DEFAULT_MASK);
	eth_write(base_addr, REG_MMC_TX_INTR_MASK, MMC_DEFAULT_MASK);
	eth_write(base_addr, REG_MMC_RX_IPC_INTR_MASK, MMC_DEFAULT_MASK);

	eth_write(base_addr, REG_ADDR_DMA_OPERATION,
	/* Enable receive store-and-forward mode for simplicity. */
	OP_MODE_25_RX_STORE_N_FORWARD \|
	/* Enable transmit store-and-forward mode for simplicity. */
	OP_MODE_21_TX_STORE_N_FORWARD \|
	/* Place the transmitter state machine in the Running state. */
	OP_MODE_13_START_TX \|
	/* Place the receiver state machine in the Running state. */
	OP_MODE_1_START_RX);

	SYS_LOG_INF("Enabled 100M full-duplex mode.");

	net_driver_ethernet_register_tx(eth_net_tx);

	config->config_func(port);

	return 0;
	}

	/* Bindings to the plaform */
	#if CONFIG_ETH_DW_0
	static void eth_config_0_irq(struct device *port);

	static struct eth_config eth_config_0 = {
	.base_addr = ETH_DW_0_BASE_ADDR,
	#ifdef CONFIG_ETH_DW_0_IRQ_DIRECT
	.irq_num = ETH_DW_0_IRQ,
	#endif
	#if CONFIG_PCI
	.pci_dev.class_type = ETH_DW_PCI_CLASS,
	.pci_dev.bus = ETH_DW_0_PCI_BUS,
	.pci_dev.dev = ETH_DW_0_PCI_DEV,
	.pci_dev.vendor_id = ETH_DW_PCI_VENDOR_ID,
	.pci_dev.device_id = ETH_DW_PCI_DEVICE_ID,
	.pci_dev.function = ETH_DW_0_PCI_FUNCTION,
	.pci_dev.bar = ETH_DW_0_PCI_BAR,
	#endif
	.config_func = eth_config_0_irq,

	#ifdef CONFIG_ETH_DW_0_IRQ_SHARED
	.shared_irq_dev_name = CONFIG_ETH_DW_0_IRQ_SHARED_NAME,
	#endif
	};

	static struct eth_runtime eth_0_runtime;

	DEVICE_INIT(eth_dw_0, CONFIG_ETH_DW_0_NAME, eth_initialize,
	&eth_0_runtime, &eth_config_0,
	NANOKERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE);

	static int eth_net_tx(struct net_buf *buf)
	{
	return eth_tx(DEVICE_GET(eth_dw_0), buf);
	}

	static void eth_config_0_irq(struct device *port)
	{
	struct eth_config *config = port->config->config_info;
	struct device *shared_irq_dev;

	#ifdef CONFIG_ETH_DW_0_IRQ_DIRECT
	ARG_UNUSED(shared_irq_dev);
	IRQ_CONNECT(ETH_DW_0_IRQ, CONFIG_ETH_DW_0_IRQ_PRI, eth_dw_isr,
	DEVICE_GET(eth_dw_0), 0);
	irq_enable(ETH_DW_0_IRQ);
	#elif defined(CONFIG_ETH_DW_0_IRQ_SHARED)
	shared_irq_dev = device_get_binding(config->shared_irq_dev_name);
	__ASSERT(shared_irq_dev != NULL, "Failed to get eth_dw device binding");
	shared_irq_isr_register(shared_irq_dev, (isr_t)eth_dw_isr, port);
	shared_irq_enable(shared_irq_dev, port);
	#endif
	}
	#endif /* CONFIG_ETH_DW_0 */