/** | |
****************************************************************************** | |
* @file stm32f4xx_hal_cryp.h | |
* @author MCD Application Team | |
* @version V1.7.1 | |
* @date 14-April-2017 | |
* @brief Header file of CRYP HAL module. | |
****************************************************************************** | |
* @attention | |
* | |
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> | |
* | |
* Redistribution and use in source and binary forms, with or without modification, | |
* are permitted provided that the following conditions are met: | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* 3. Neither the name of STMicroelectronics nor the names of its contributors | |
* may be used to endorse or promote products derived from this software | |
* without specific prior written permission. | |
* | |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* | |
****************************************************************************** | |
*/ | |
/* Define to prevent recursive inclusion -------------------------------------*/ | |
#ifndef __STM32F4xx_HAL_CRYP_H | |
#define __STM32F4xx_HAL_CRYP_H | |
#ifdef __cplusplus | |
extern "C" { | |
#endif | |
/* Includes ------------------------------------------------------------------*/ | |
#include "stm32f4xx_hal_def.h" | |
#if defined(CRYP) | |
/** @addtogroup STM32F4xx_HAL_Driver | |
* @{ | |
*/ | |
/** @addtogroup CRYP | |
* @{ | |
*/ | |
/* Exported types ------------------------------------------------------------*/ | |
/** @defgroup CRYP_Exported_Types CRYP Exported Types | |
* @{ | |
*/ | |
/** @defgroup CRYP_Exported_Types_Group1 CRYP Configuration Structure definition | |
* @{ | |
*/ | |
typedef struct | |
{ | |
uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string. | |
This parameter can be a value of @ref CRYP_Data_Type */ | |
uint32_t KeySize; /*!< Used only in AES mode only : 128, 192 or 256 bit key length. | |
This parameter can be a value of @ref CRYP_Key_Size */ | |
uint8_t* pKey; /*!< The key used for encryption/decryption */ | |
uint8_t* pInitVect; /*!< The initialization vector used also as initialization | |
counter in CTR mode */ | |
uint8_t IVSize; /*!< The size of initialization vector. | |
This parameter (called nonce size in CCM) is used only | |
in AES-128/192/256 encryption/decryption CCM mode */ | |
uint8_t TagSize; /*!< The size of returned authentication TAG. | |
This parameter is used only in AES-128/192/256 | |
encryption/decryption CCM mode */ | |
uint8_t* Header; /*!< The header used in GCM and CCM modes */ | |
uint32_t HeaderSize; /*!< The size of header buffer in bytes */ | |
uint8_t* pScratch; /*!< Scratch buffer used to append the header. It's size must be equal to header size + 21 bytes. | |
This parameter is used only in AES-128/192/256 encryption/decryption CCM mode */ | |
}CRYP_InitTypeDef; | |
/** | |
* @} | |
*/ | |
/** @defgroup CRYP_Exported_Types_Group2 CRYP State structures definition | |
* @{ | |
*/ | |
typedef enum | |
{ | |
HAL_CRYP_STATE_RESET = 0x00U, /*!< CRYP not yet initialized or disabled */ | |
HAL_CRYP_STATE_READY = 0x01U, /*!< CRYP initialized and ready for use */ | |
HAL_CRYP_STATE_BUSY = 0x02U, /*!< CRYP internal processing is ongoing */ | |
HAL_CRYP_STATE_TIMEOUT = 0x03U, /*!< CRYP timeout state */ | |
HAL_CRYP_STATE_ERROR = 0x04U /*!< CRYP error state */ | |
}HAL_CRYP_STATETypeDef; | |
/** | |
* @} | |
*/ | |
/** @defgroup CRYP_Exported_Types_Group3 CRYP phase structures definition | |
* @{ | |
*/ | |
typedef enum | |
{ | |
HAL_CRYP_PHASE_READY = 0x01U, /*!< CRYP peripheral is ready for initialization. */ | |
HAL_CRYP_PHASE_PROCESS = 0x02U, /*!< CRYP peripheral is in processing phase */ | |
HAL_CRYP_PHASE_FINAL = 0x03U /*!< CRYP peripheral is in final phase | |
This is relevant only with CCM and GCM modes */ | |
}HAL_PhaseTypeDef; | |
/** | |
* @} | |
*/ | |
/** @defgroup CRYP_Exported_Types_Group4 CRYP handle Structure definition | |
* @{ | |
*/ | |
typedef struct | |
{ | |
CRYP_TypeDef *Instance; /*!< CRYP registers base address */ | |
CRYP_InitTypeDef Init; /*!< CRYP required parameters */ | |
uint8_t *pCrypInBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */ | |
uint8_t *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */ | |
__IO uint16_t CrypInCount; /*!< Counter of inputed data */ | |
__IO uint16_t CrypOutCount; /*!< Counter of output data */ | |
HAL_StatusTypeDef Status; /*!< CRYP peripheral status */ | |
HAL_PhaseTypeDef Phase; /*!< CRYP peripheral phase */ | |
DMA_HandleTypeDef *hdmain; /*!< CRYP In DMA handle parameters */ | |
DMA_HandleTypeDef *hdmaout; /*!< CRYP Out DMA handle parameters */ | |
HAL_LockTypeDef Lock; /*!< CRYP locking object */ | |
__IO HAL_CRYP_STATETypeDef State; /*!< CRYP peripheral state */ | |
}CRYP_HandleTypeDef; | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Exported constants --------------------------------------------------------*/ | |
/** @defgroup CRYP_Exported_Constants CRYP Exported Constants | |
* @{ | |
*/ | |
/** @defgroup CRYP_Key_Size CRYP Key Size | |
* @{ | |
*/ | |
#define CRYP_KEYSIZE_128B 0x00000000U | |
#define CRYP_KEYSIZE_192B CRYP_CR_KEYSIZE_0 | |
#define CRYP_KEYSIZE_256B CRYP_CR_KEYSIZE_1 | |
/** | |
* @} | |
*/ | |
/** @defgroup CRYP_Data_Type CRYP Data Type | |
* @{ | |
*/ | |
#define CRYP_DATATYPE_32B 0x00000000U | |
#define CRYP_DATATYPE_16B CRYP_CR_DATATYPE_0 | |
#define CRYP_DATATYPE_8B CRYP_CR_DATATYPE_1 | |
#define CRYP_DATATYPE_1B CRYP_CR_DATATYPE | |
/** | |
* @} | |
*/ | |
/** @defgroup CRYP_Exported_Constants_Group3 CRYP CRYP_AlgoModeDirection | |
* @{ | |
*/ | |
#define CRYP_CR_ALGOMODE_DIRECTION 0x0008003CU | |
#define CRYP_CR_ALGOMODE_TDES_ECB_ENCRYPT 0x00000000U | |
#define CRYP_CR_ALGOMODE_TDES_ECB_DECRYPT 0x00000004U | |
#define CRYP_CR_ALGOMODE_TDES_CBC_ENCRYPT 0x00000008U | |
#define CRYP_CR_ALGOMODE_TDES_CBC_DECRYPT 0x0000000CU | |
#define CRYP_CR_ALGOMODE_DES_ECB_ENCRYPT 0x00000010U | |
#define CRYP_CR_ALGOMODE_DES_ECB_DECRYPT 0x00000014U | |
#define CRYP_CR_ALGOMODE_DES_CBC_ENCRYPT 0x00000018U | |
#define CRYP_CR_ALGOMODE_DES_CBC_DECRYPT 0x0000001CU | |
#define CRYP_CR_ALGOMODE_AES_ECB_ENCRYPT 0x00000020U | |
#define CRYP_CR_ALGOMODE_AES_ECB_DECRYPT 0x00000024U | |
#define CRYP_CR_ALGOMODE_AES_CBC_ENCRYPT 0x00000028U | |
#define CRYP_CR_ALGOMODE_AES_CBC_DECRYPT 0x0000002CU | |
#define CRYP_CR_ALGOMODE_AES_CTR_ENCRYPT 0x00000030U | |
#define CRYP_CR_ALGOMODE_AES_CTR_DECRYPT 0x00000034U | |
/** | |
* @} | |
*/ | |
/** @defgroup CRYP_Exported_Constants_Group4 CRYP CRYP_Interrupt | |
* @{ | |
*/ | |
#define CRYP_IT_INI ((uint32_t)CRYP_IMSCR_INIM) /*!< Input FIFO Interrupt */ | |
#define CRYP_IT_OUTI ((uint32_t)CRYP_IMSCR_OUTIM) /*!< Output FIFO Interrupt */ | |
/** | |
* @} | |
*/ | |
/** @defgroup CRYP_Exported_Constants_Group5 CRYP CRYP_Flags | |
* @{ | |
*/ | |
#define CRYP_FLAG_BUSY 0x00000010U /*!< The CRYP core is currently | |
processing a block of data | |
or a key preparation (for | |
AES decryption). */ | |
#define CRYP_FLAG_IFEM 0x00000001U /*!< Input FIFO is empty */ | |
#define CRYP_FLAG_IFNF 0x00000002U /*!< Input FIFO is not Full */ | |
#define CRYP_FLAG_OFNE 0x00000004U /*!< Output FIFO is not empty */ | |
#define CRYP_FLAG_OFFU 0x00000008U /*!< Output FIFO is Full */ | |
#define CRYP_FLAG_OUTRIS 0x01000002U /*!< Output FIFO service raw | |
interrupt status */ | |
#define CRYP_FLAG_INRIS 0x01000001U /*!< Input FIFO service raw | |
interrupt status */ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Exported macro ------------------------------------------------------------*/ | |
/** @defgroup CRYP_Exported_Macros CRYP Exported Macros | |
* @{ | |
*/ | |
/** @brief Reset CRYP handle state | |
* @param __HANDLE__: specifies the CRYP handle. | |
* @retval None | |
*/ | |
#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRYP_STATE_RESET) | |
/** | |
* @brief Enable/Disable the CRYP peripheral. | |
* @param __HANDLE__: specifies the CRYP handle. | |
* @retval None | |
*/ | |
#define __HAL_CRYP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRYP_CR_CRYPEN) | |
#define __HAL_CRYP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~CRYP_CR_CRYPEN) | |
/** | |
* @brief Flush the data FIFO. | |
* @param __HANDLE__: specifies the CRYP handle. | |
* @retval None | |
*/ | |
#define __HAL_CRYP_FIFO_FLUSH(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRYP_CR_FFLUSH) | |
/** | |
* @brief Set the algorithm mode: AES-ECB, AES-CBC, AES-CTR, DES-ECB, DES-CBC. | |
* @param __HANDLE__: specifies the CRYP handle. | |
* @param MODE: The algorithm mode. | |
* @retval None | |
*/ | |
#define __HAL_CRYP_SET_MODE(__HANDLE__, MODE) ((__HANDLE__)->Instance->CR |= (uint32_t)(MODE)) | |
/** @brief Check whether the specified CRYP flag is set or not. | |
* @param __HANDLE__: specifies the CRYP handle. | |
* @param __FLAG__: specifies the flag to check. | |
* This parameter can be one of the following values: | |
* @arg CRYP_FLAG_BUSY: The CRYP core is currently processing a block of data | |
* or a key preparation (for AES decryption). | |
* @arg CRYP_FLAG_IFEM: Input FIFO is empty | |
* @arg CRYP_FLAG_IFNF: Input FIFO is not full | |
* @arg CRYP_FLAG_INRIS: Input FIFO service raw interrupt is pending | |
* @arg CRYP_FLAG_OFNE: Output FIFO is not empty | |
* @arg CRYP_FLAG_OFFU: Output FIFO is full | |
* @arg CRYP_FLAG_OUTRIS: Input FIFO service raw interrupt is pending | |
* @retval The new state of __FLAG__ (TRUE or FALSE). | |
*/ | |
#define __HAL_CRYP_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 24U)) == 0x01U)?((((__HANDLE__)->Instance->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)): \ | |
((((__HANDLE__)->Instance->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK))) | |
/** @brief Check whether the specified CRYP interrupt is set or not. | |
* @param __HANDLE__: specifies the CRYP handle. | |
* @param __INTERRUPT__: specifies the interrupt to check. | |
* This parameter can be one of the following values: | |
* @arg CRYP_IT_INRIS: Input FIFO service raw interrupt is pending | |
* @arg CRYP_IT_OUTRIS: Output FIFO service raw interrupt is pending | |
* @retval The new state of __INTERRUPT__ (TRUE or FALSE). | |
*/ | |
#define __HAL_CRYP_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->MISR & (__INTERRUPT__)) == (__INTERRUPT__)) | |
/** | |
* @brief Enable the CRYP interrupt. | |
* @param __HANDLE__: specifies the CRYP handle. | |
* @param __INTERRUPT__: CRYP Interrupt. | |
* @retval None | |
*/ | |
#define __HAL_CRYP_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMSCR) |= (__INTERRUPT__)) | |
/** | |
* @brief Disable the CRYP interrupt. | |
* @param __HANDLE__: specifies the CRYP handle. | |
* @param __INTERRUPT__: CRYP interrupt. | |
* @retval None | |
*/ | |
#define __HAL_CRYP_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMSCR) &= ~(__INTERRUPT__)) | |
/** | |
* @} | |
*/ | |
/* Include CRYP HAL Extension module */ | |
#include "stm32f4xx_hal_cryp_ex.h" | |
/* Exported functions --------------------------------------------------------*/ | |
/** @defgroup CRYP_Exported_Functions CRYP Exported Functions | |
* @{ | |
*/ | |
/** @addtogroup CRYP_Exported_Functions_Group1 | |
* @{ | |
*/ | |
HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp); | |
HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp); | |
void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp); | |
void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp); | |
/** | |
* @} | |
*/ | |
/** @addtogroup CRYP_Exported_Functions_Group2 | |
* @{ | |
*/ | |
/* AES encryption/decryption using polling ***********************************/ | |
HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout); | |
/* AES encryption/decryption using interrupt *********************************/ | |
HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); | |
HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); | |
HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); | |
HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); | |
HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); | |
HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); | |
/* AES encryption/decryption using DMA ***************************************/ | |
HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); | |
HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); | |
HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); | |
HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); | |
HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); | |
HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); | |
/** | |
* @} | |
*/ | |
/** @addtogroup CRYP_Exported_Functions_Group3 | |
* @{ | |
*/ | |
/* DES encryption/decryption using polling ***********************************/ | |
HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout); | |
/* DES encryption/decryption using interrupt *********************************/ | |
HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); | |
HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); | |
HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); | |
HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); | |
/* DES encryption/decryption using DMA ***************************************/ | |
HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); | |
HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); | |
HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); | |
HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); | |
/** | |
* @} | |
*/ | |
/** @addtogroup CRYP_Exported_Functions_Group4 | |
* @{ | |
*/ | |
/* TDES encryption/decryption using polling **********************************/ | |
HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout); | |
/* TDES encryption/decryption using interrupt ********************************/ | |
HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); | |
HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); | |
HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); | |
HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); | |
/* TDES encryption/decryption using DMA **************************************/ | |
HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); | |
HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); | |
HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); | |
HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); | |
/** | |
* @} | |
*/ | |
/** @addtogroup CRYP_Exported_Functions_Group5 | |
* @{ | |
*/ | |
void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp); | |
void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp); | |
void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp); | |
/** | |
* @} | |
*/ | |
/** @addtogroup CRYP_Exported_Functions_Group6 | |
* @{ | |
*/ | |
void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp); | |
/** | |
* @} | |
*/ | |
/** @addtogroup CRYP_Exported_Functions_Group7 | |
* @{ | |
*/ | |
HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp); | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Private types -------------------------------------------------------------*/ | |
/** @defgroup CRYP_Private_Types CRYP Private Types | |
* @{ | |
*/ | |
/** | |
* @} | |
*/ | |
/* Private variables ---------------------------------------------------------*/ | |
/** @defgroup CRYP_Private_Variables CRYP Private Variables | |
* @{ | |
*/ | |
/** | |
* @} | |
*/ | |
/* Private constants ---------------------------------------------------------*/ | |
/** @defgroup CRYP_Private_Constants CRYP Private Constants | |
* @{ | |
*/ | |
#define CRYP_FLAG_MASK 0x0000001FU | |
/** | |
* @} | |
*/ | |
/* Private macros ------------------------------------------------------------*/ | |
/** @defgroup CRYP_Private_Macros CRYP Private Macros | |
* @{ | |
*/ | |
#define IS_CRYP_KEYSIZE(__KEYSIZE__) (((__KEYSIZE__) == CRYP_KEYSIZE_128B) || \ | |
((__KEYSIZE__) == CRYP_KEYSIZE_192B) || \ | |
((__KEYSIZE__) == CRYP_KEYSIZE_256B)) | |
#define IS_CRYP_DATATYPE(__DATATYPE__) (((__DATATYPE__) == CRYP_DATATYPE_32B) || \ | |
((__DATATYPE__) == CRYP_DATATYPE_16B) || \ | |
((__DATATYPE__) == CRYP_DATATYPE_8B) || \ | |
((__DATATYPE__) == CRYP_DATATYPE_1B)) | |
/** | |
* @} | |
*/ | |
/* Private functions ---------------------------------------------------------*/ | |
/** @defgroup CRYP_Private_Functions CRYP Private Functions | |
* @{ | |
*/ | |
/** | |
* @} | |
*/ | |
#endif /* CRYP */ | |
#if defined (AES) | |
/** @addtogroup STM32F4xx_HAL_Driver | |
* @{ | |
*/ | |
/** @addtogroup CRYP | |
* @{ | |
*/ | |
/* Exported types ------------------------------------------------------------*/ | |
/** @defgroup CRYP_Exported_Types CRYP Exported Types | |
* @{ | |
*/ | |
/** | |
* @brief CRYP Configuration Structure definition | |
*/ | |
typedef struct | |
{ | |
uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string. | |
This parameter can be a value of @ref CRYP_Data_Type */ | |
uint32_t KeySize; /*!< 128 or 256-bit key length. | |
This parameter can be a value of @ref CRYP_Key_Size */ | |
uint32_t OperatingMode; /*!< AES operating mode. | |
This parameter can be a value of @ref CRYP_AES_OperatingMode */ | |
uint32_t ChainingMode; /*!< AES chaining mode. | |
This parameter can be a value of @ref CRYP_AES_ChainingMode */ | |
uint32_t KeyWriteFlag; /*!< Allows to bypass or not key write-up before decryption. | |
This parameter can be a value of @ref CRYP_Key_Write */ | |
uint32_t GCMCMACPhase; /*!< Indicates the processing phase of the Galois Counter Mode (GCM), | |
Galois Message Authentication Code (GMAC) or Cipher Message | |
Authentication Code (CMAC) or Counter with Cipher Mode (CCM) when | |
the latter is applicable. | |
This parameter can be a value of @ref CRYP_GCM_CMAC_Phase */ | |
uint8_t* pKey; /*!< Encryption/Decryption Key */ | |
uint8_t* pInitVect; /*!< Initialization Vector used for CTR, CBC, GCM/GMAC, CMAC, | |
(and CCM when applicable) modes */ | |
uint8_t* Header; /*!< Header used in GCM/GMAC, CMAC (and CCM when applicable) modes */ | |
uint64_t HeaderSize; /*!< Header size in bytes */ | |
}CRYP_InitTypeDef; | |
/** | |
* @brief HAL CRYP State structures definition | |
*/ | |
typedef enum | |
{ | |
HAL_CRYP_STATE_RESET = 0x00U, /*!< CRYP not yet initialized or disabled */ | |
HAL_CRYP_STATE_READY = 0x01U, /*!< CRYP initialized and ready for use */ | |
HAL_CRYP_STATE_BUSY = 0x02U, /*!< CRYP internal processing is ongoing */ | |
HAL_CRYP_STATE_TIMEOUT = 0x03U, /*!< CRYP timeout state */ | |
HAL_CRYP_STATE_ERROR = 0x04U, /*!< CRYP error state */ | |
HAL_CRYP_STATE_SUSPENDED = 0x05U /*!< CRYP suspended */ | |
}HAL_CRYP_STATETypeDef; | |
/** | |
* @brief HAL CRYP phase structures definition | |
*/ | |
typedef enum | |
{ | |
HAL_CRYP_PHASE_READY = 0x01U, /*!< CRYP peripheral is ready for initialization. */ | |
HAL_CRYP_PHASE_PROCESS = 0x02U, /*!< CRYP peripheral is in processing phase */ | |
HAL_CRYP_PHASE_START = 0x03U, /*!< CRYP peripheral has been initialized but | |
GCM/GMAC/CMAC(/CCM) initialization phase has not started */ | |
HAL_CRYP_PHASE_INIT_OVER = 0x04U, /*!< GCM/GMAC/CMAC(/CCM) init phase has been carried out */ | |
HAL_CRYP_PHASE_HEADER_OVER = 0x05U, /*!< GCM/GMAC/CMAC(/CCM) header phase has been carried out */ | |
HAL_CRYP_PHASE_PAYLOAD_OVER = 0x06U, /*!< GCM(/CCM) payload phase has been carried out */ | |
HAL_CRYP_PHASE_FINAL_OVER = 0x07U, /*!< GCM/GMAC/CMAC(/CCM) final phase has been carried out */ | |
HAL_CRYP_PHASE_HEADER_SUSPENDED = 0x08U, /*!< GCM/GMAC/CMAC(/CCM) header phase has been suspended */ | |
HAL_CRYP_PHASE_PAYLOAD_SUSPENDED = 0x09U, /*!< GCM(/CCM) payload phase has been suspended */ | |
HAL_CRYP_PHASE_NOT_USED = 0x0AU /*!< Phase is irrelevant to the current chaining mode */ | |
}HAL_PhaseTypeDef; | |
/** | |
* @brief HAL CRYP mode suspend definitions | |
*/ | |
typedef enum | |
{ | |
HAL_CRYP_SUSPEND_NONE = 0x00U, /*!< CRYP peripheral suspension not requested */ | |
HAL_CRYP_SUSPEND = 0x01U /*!< CRYP peripheral suspension requested */ | |
}HAL_SuspendTypeDef; | |
/** | |
* @brief HAL CRYP Error Codes definition | |
*/ | |
#define HAL_CRYP_ERROR_NONE 0x00000000U /*!< No error */ | |
#define HAL_CRYP_WRITE_ERROR 0x00000001U /*!< Write error */ | |
#define HAL_CRYP_READ_ERROR 0x00000002U /*!< Read error */ | |
#define HAL_CRYP_DMA_ERROR 0x00000004U /*!< DMA error */ | |
#define HAL_CRYP_BUSY_ERROR 0x00000008U /*!< Busy flag error */ | |
/** | |
* @brief CRYP handle Structure definition | |
*/ | |
typedef struct | |
{ | |
AES_TypeDef *Instance; /*!< Register base address */ | |
CRYP_InitTypeDef Init; /*!< CRYP initialization parameters */ | |
uint8_t *pCrypInBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) input buffer */ | |
uint8_t *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) output buffer */ | |
uint32_t CrypInCount; /*!< Input data size in bytes or, after suspension, the remaining | |
number of bytes to process */ | |
uint32_t CrypOutCount; /*!< Output data size in bytes */ | |
HAL_PhaseTypeDef Phase; /*!< CRYP peripheral processing phase for GCM, GMAC, CMAC | |
(or CCM when applicable) modes. | |
Indicates the last phase carried out to ease | |
phase transitions */ | |
DMA_HandleTypeDef *hdmain; /*!< CRYP peripheral Input DMA handle parameters */ | |
DMA_HandleTypeDef *hdmaout; /*!< CRYP peripheral Output DMA handle parameters */ | |
HAL_LockTypeDef Lock; /*!< CRYP locking object */ | |
__IO HAL_CRYP_STATETypeDef State; /*!< CRYP peripheral state */ | |
__IO uint32_t ErrorCode; /*!< CRYP peripheral error code */ | |
HAL_SuspendTypeDef SuspendRequest; /*!< CRYP peripheral suspension request flag */ | |
}CRYP_HandleTypeDef; | |
/** | |
* @} | |
*/ | |
/* Exported constants --------------------------------------------------------*/ | |
/** @defgroup CRYP_Exported_Constants CRYP Exported Constants | |
* @{ | |
*/ | |
/** @defgroup CRYP_Key_Size Key size selection | |
* @{ | |
*/ | |
#define CRYP_KEYSIZE_128B 0x00000000U /*!< 128-bit long key */ | |
#define CRYP_KEYSIZE_256B AES_CR_KEYSIZE /*!< 256-bit long key */ | |
/** | |
* @} | |
*/ | |
/** @defgroup CRYP_Data_Type AES Data Type selection | |
* @{ | |
*/ | |
#define CRYP_DATATYPE_32B 0x00000000U /*!< 32-bit data type (no swapping) */ | |
#define CRYP_DATATYPE_16B AES_CR_DATATYPE_0 /*!< 16-bit data type (half-word swapping) */ | |
#define CRYP_DATATYPE_8B AES_CR_DATATYPE_1 /*!< 8-bit data type (byte swapping) */ | |
#define CRYP_DATATYPE_1B AES_CR_DATATYPE /*!< 1-bit data type (bit swapping) */ | |
/** | |
* @} | |
*/ | |
/** @defgroup CRYP_AES_State AES Enable state | |
* @{ | |
*/ | |
#define CRYP_AES_DISABLE 0x00000000U /*!< Disable AES */ | |
#define CRYP_AES_ENABLE AES_CR_EN /*!< Enable AES */ | |
/** | |
* @} | |
*/ | |
/** @defgroup CRYP_AES_OperatingMode AES operating mode | |
* @{ | |
*/ | |
#define CRYP_ALGOMODE_ENCRYPT 0x00000000U /*!< Encryption mode */ | |
#define CRYP_ALGOMODE_KEYDERIVATION AES_CR_MODE_0 /*!< Key derivation mode */ | |
#define CRYP_ALGOMODE_DECRYPT AES_CR_MODE_1 /*!< Decryption */ | |
#define CRYP_ALGOMODE_KEYDERIVATION_DECRYPT AES_CR_MODE /*!< Key derivation and decryption */ | |
#define CRYP_ALGOMODE_TAG_GENERATION 0x00000000U /*!< GMAC or CMAC authentication tag generation */ | |
/** | |
* @} | |
*/ | |
/** @defgroup CRYP_AES_ChainingMode AES chaining mode | |
* @{ | |
*/ | |
#define CRYP_CHAINMODE_AES_ECB 0x00000000U /*!< Electronic codebook chaining algorithm */ | |
#define CRYP_CHAINMODE_AES_CBC AES_CR_CHMOD_0 /*!< Cipher block chaining algorithm */ | |
#define CRYP_CHAINMODE_AES_CTR AES_CR_CHMOD_1 /*!< Counter mode chaining algorithm */ | |
#define CRYP_CHAINMODE_AES_GCM_GMAC (AES_CR_CHMOD_0 | AES_CR_CHMOD_1) /*!< Galois counter mode - Galois message authentication code */ | |
#define CRYP_CHAINMODE_AES_CMAC AES_CR_CHMOD_2 /*!< Cipher message authentication code */ | |
#if defined(AES_CR_NPBLB) | |
#define CRYP_CHAINMODE_AES_CCM_CMAC AES_CR_CHMOD_2 /*!< Counter with Cipher Mode - Cipher message authentication code */ | |
#endif | |
/** | |
* @} | |
*/ | |
/** @defgroup CRYP_Key_Write AES decryption key write-up flag | |
* @{ | |
*/ | |
#define CRYP_KEY_WRITE_ENABLE 0x00000000U /*!< Enable decryption key writing */ | |
#define CRYP_KEY_WRITE_DISABLE 0x00000001U /*!< Disable decryption key writing */ | |
/** | |
* @} | |
*/ | |
/** @defgroup CRYP_DMAIN DMA Input phase management enable state | |
* @{ | |
*/ | |
#define CRYP_DMAIN_DISABLE 0x00000000U /*!< Disable DMA Input phase management */ | |
#define CRYP_DMAIN_ENABLE AES_CR_DMAINEN /*!< Enable DMA Input phase management */ | |
/** | |
* @} | |
*/ | |
/** @defgroup CRYP_DMAOUT DMA Output phase management enable state | |
* @{ | |
*/ | |
#define CRYP_DMAOUT_DISABLE 0x00000000U /*!< Disable DMA Output phase management */ | |
#define CRYP_DMAOUT_ENABLE AES_CR_DMAOUTEN /*!< Enable DMA Output phase management */ | |
/** | |
* @} | |
*/ | |
/** @defgroup CRYP_GCM_CMAC_Phase GCM/GMAC and CMAC processing phase selection | |
* @{ | |
*/ | |
#define CRYP_GCM_INIT_PHASE 0x00000000U /*!< GCM/GMAC (or CCM) init phase */ | |
#define CRYP_GCMCMAC_HEADER_PHASE AES_CR_GCMPH_0 /*!< GCM/GMAC or (CCM/)CMAC header phase */ | |
#define CRYP_GCM_PAYLOAD_PHASE AES_CR_GCMPH_1 /*!< GCM(/CCM) payload phase */ | |
#define CRYP_GCMCMAC_FINAL_PHASE AES_CR_GCMPH /*!< GCM/GMAC or (CCM/)CMAC final phase */ | |
/* Definitions duplication for code readibility's sake: | |
supported or not supported chain modes are not specified for each phase */ | |
#define CRYP_INIT_PHASE 0x00000000U /*!< Init phase */ | |
#define CRYP_HEADER_PHASE AES_CR_GCMPH_0 /*!< Header phase */ | |
#define CRYP_PAYLOAD_PHASE AES_CR_GCMPH_1 /*!< Payload phase */ | |
#define CRYP_FINAL_PHASE AES_CR_GCMPH /*!< Final phase */ | |
/** | |
* @} | |
*/ | |
/** @defgroup CRYP_Flags AES status flags | |
* @{ | |
*/ | |
#define CRYP_FLAG_BUSY AES_SR_BUSY /*!< GCM process suspension forbidden */ | |
#define CRYP_FLAG_WRERR AES_SR_WRERR /*!< Write Error */ | |
#define CRYP_FLAG_RDERR AES_SR_RDERR /*!< Read error */ | |
#define CRYP_FLAG_CCF AES_SR_CCF /*!< Computation completed */ | |
/** | |
* @} | |
*/ | |
/** @defgroup CRYP_Clear_Flags AES clearing flags | |
* @{ | |
*/ | |
#define CRYP_CCF_CLEAR AES_CR_CCFC /*!< Computation Complete Flag Clear */ | |
#define CRYP_ERR_CLEAR AES_CR_ERRC /*!< Error Flag Clear */ | |
/** | |
* @} | |
*/ | |
/** @defgroup AES_Interrupts_Enable AES Interrupts Enable bits | |
* @{ | |
*/ | |
#define CRYP_IT_CCFIE AES_CR_CCFIE /*!< Computation Complete interrupt enable */ | |
#define CRYP_IT_ERRIE AES_CR_ERRIE /*!< Error interrupt enable */ | |
/** | |
* @} | |
*/ | |
/** @defgroup CRYP_Interrupts_Flags AES Interrupts flags | |
* @{ | |
*/ | |
#define CRYP_IT_WRERR AES_SR_WRERR /*!< Write Error */ | |
#define CRYP_IT_RDERR AES_SR_RDERR /*!< Read Error */ | |
#define CRYP_IT_CCF AES_SR_CCF /*!< Computation completed */ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Exported macros -----------------------------------------------------------*/ | |
/** @defgroup CRYP_Exported_Macros CRYP Exported Macros | |
* @{ | |
*/ | |
/** @brief Reset CRYP handle state. | |
* @param __HANDLE__: specifies the CRYP handle. | |
* @retval None | |
*/ | |
#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRYP_STATE_RESET) | |
/** | |
* @brief Enable the CRYP AES peripheral. | |
* @retval None | |
*/ | |
#define __HAL_CRYP_ENABLE() (AES->CR |= AES_CR_EN) | |
/** | |
* @brief Disable the CRYP AES peripheral. | |
* @retval None | |
*/ | |
#define __HAL_CRYP_DISABLE() (AES->CR &= ~AES_CR_EN) | |
/** | |
* @brief Set the algorithm operating mode. | |
* @param __OPERATING_MODE__: specifies the operating mode | |
* This parameter can be one of the following values: | |
* @arg @ref CRYP_ALGOMODE_ENCRYPT encryption | |
* @arg @ref CRYP_ALGOMODE_KEYDERIVATION key derivation | |
* @arg @ref CRYP_ALGOMODE_DECRYPT decryption | |
* @arg @ref CRYP_ALGOMODE_KEYDERIVATION_DECRYPT key derivation and decryption | |
* @retval None | |
*/ | |
#define __HAL_CRYP_SET_OPERATINGMODE(__OPERATING_MODE__) MODIFY_REG(AES->CR, AES_CR_MODE, (__OPERATING_MODE__)) | |
/** | |
* @brief Set the algorithm chaining mode. | |
* @param __CHAINING_MODE__: specifies the chaining mode | |
* This parameter can be one of the following values: | |
* @arg @ref CRYP_CHAINMODE_AES_ECB Electronic CodeBook | |
* @arg @ref CRYP_CHAINMODE_AES_CBC Cipher Block Chaining | |
* @arg @ref CRYP_CHAINMODE_AES_CTR CounTeR mode | |
* @arg @ref CRYP_CHAINMODE_AES_GCM_GMAC Galois Counter Mode or Galois Message Authentication Code | |
* @arg @ref CRYP_CHAINMODE_AES_CMAC Cipher Message Authentication Code (or Counter with Cipher Mode when applicable) | |
* @retval None | |
*/ | |
#define __HAL_CRYP_SET_CHAININGMODE(__CHAINING_MODE__) MODIFY_REG(AES->CR, AES_CR_CHMOD, (__CHAINING_MODE__)) | |
/** @brief Check whether the specified CRYP status flag is set or not. | |
* @param __FLAG__: specifies the flag to check. | |
* This parameter can be one of the following values: | |
* @arg @ref CRYP_FLAG_BUSY GCM process suspension forbidden | |
* @arg @ref CRYP_IT_WRERR Write Error | |
* @arg @ref CRYP_IT_RDERR Read Error | |
* @arg @ref CRYP_IT_CCF Computation Complete | |
* @retval The state of __FLAG__ (TRUE or FALSE). | |
*/ | |
#define __HAL_CRYP_GET_FLAG(__FLAG__) ((AES->SR & (__FLAG__)) == (__FLAG__)) | |
/** @brief Clear the CRYP pending status flag. | |
* @param __FLAG__: specifies the flag to clear. | |
* This parameter can be one of the following values: | |
* @arg @ref CRYP_ERR_CLEAR Read (RDERR) or Write Error (WRERR) Flag Clear | |
* @arg @ref CRYP_CCF_CLEAR Computation Complete Flag (CCF) Clear | |
* @retval None | |
*/ | |
#define __HAL_CRYP_CLEAR_FLAG(__FLAG__) SET_BIT(AES->CR, (__FLAG__)) | |
/** @brief Check whether the specified CRYP interrupt source is enabled or not. | |
* @param __INTERRUPT__: CRYP interrupt source to check | |
* This parameter can be one of the following values: | |
* @arg @ref CRYP_IT_ERRIE Error interrupt (used for RDERR and WRERR) | |
* @arg @ref CRYP_IT_CCFIE Computation Complete interrupt | |
* @retval State of interruption (TRUE or FALSE). | |
*/ | |
#define __HAL_CRYP_GET_IT_SOURCE(__INTERRUPT__) ((AES->CR & (__INTERRUPT__)) == (__INTERRUPT__)) | |
/** @brief Check whether the specified CRYP interrupt is set or not. | |
* @param __INTERRUPT__: specifies the interrupt to check. | |
* This parameter can be one of the following values: | |
* @arg @ref CRYP_IT_WRERR Write Error | |
* @arg @ref CRYP_IT_RDERR Read Error | |
* @arg @ref CRYP_IT_CCF Computation Complete | |
* @retval The state of __INTERRUPT__ (TRUE or FALSE). | |
*/ | |
#define __HAL_CRYP_GET_IT(__INTERRUPT__) ((AES->SR & (__INTERRUPT__)) == (__INTERRUPT__)) | |
/** @brief Clear the CRYP pending interrupt. | |
* @param __INTERRUPT__: specifies the IT to clear. | |
* This parameter can be one of the following values: | |
* @arg @ref CRYP_ERR_CLEAR Read (RDERR) or Write Error (WRERR) Flag Clear | |
* @arg @ref CRYP_CCF_CLEAR Computation Complete Flag (CCF) Clear | |
* @retval None | |
*/ | |
#define __HAL_CRYP_CLEAR_IT(__INTERRUPT__) SET_BIT(AES->CR, (__INTERRUPT__)) | |
/** | |
* @brief Enable the CRYP interrupt. | |
* @param __INTERRUPT__: CRYP Interrupt. | |
* This parameter can be one of the following values: | |
* @arg @ref CRYP_IT_ERRIE Error interrupt (used for RDERR and WRERR) | |
* @arg @ref CRYP_IT_CCFIE Computation Complete interrupt | |
* @retval None | |
*/ | |
#define __HAL_CRYP_ENABLE_IT(__INTERRUPT__) ((AES->CR) |= (__INTERRUPT__)) | |
/** | |
* @brief Disable the CRYP interrupt. | |
* @param __INTERRUPT__: CRYP Interrupt. | |
* This parameter can be one of the following values: | |
* @arg @ref CRYP_IT_ERRIE Error interrupt (used for RDERR and WRERR) | |
* @arg @ref CRYP_IT_CCFIE Computation Complete interrupt | |
* @retval None | |
*/ | |
#define __HAL_CRYP_DISABLE_IT(__INTERRUPT__) ((AES->CR) &= ~(__INTERRUPT__)) | |
/** | |
* @} | |
*/ | |
/* Private macros --------------------------------------------------------*/ | |
/** @addtogroup CRYP_Private_Macros CRYP Private Macros | |
* @{ | |
*/ | |
/** | |
* @brief Verify the key size length. | |
* @param __KEYSIZE__: Ciphering/deciphering algorithm key size. | |
* @retval SET (__KEYSIZE__ is a valid value) or RESET (__KEYSIZE__ is invalid) | |
*/ | |
#define IS_CRYP_KEYSIZE(__KEYSIZE__) (((__KEYSIZE__) == CRYP_KEYSIZE_128B) || \ | |
((__KEYSIZE__) == CRYP_KEYSIZE_256B)) | |
/** | |
* @brief Verify the input data type. | |
* @param __DATATYPE__: Ciphering/deciphering algorithm input data type. | |
* @retval SET (__DATATYPE__ is valid) or RESET (__DATATYPE__ is invalid) | |
*/ | |
#define IS_CRYP_DATATYPE(__DATATYPE__) (((__DATATYPE__) == CRYP_DATATYPE_32B) || \ | |
((__DATATYPE__) == CRYP_DATATYPE_16B) || \ | |
((__DATATYPE__) == CRYP_DATATYPE_8B) || \ | |
((__DATATYPE__) == CRYP_DATATYPE_1B)) | |
/** | |
* @brief Verify the CRYP AES IP running mode. | |
* @param __MODE__: CRYP AES IP running mode. | |
* @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) | |
*/ | |
#define IS_CRYP_AES(__MODE__) (((__MODE__) == CRYP_AES_DISABLE) || \ | |
((__MODE__) == CRYP_AES_ENABLE)) | |
/** | |
* @brief Verify the selected CRYP algorithm. | |
* @param __ALGOMODE__: Selected CRYP algorithm (ciphering, deciphering, key derivation or a combination of the latter). | |
* @retval SET (__ALGOMODE__ is valid) or RESET (__ALGOMODE__ is invalid) | |
*/ | |
#define IS_CRYP_ALGOMODE(__ALGOMODE__) (((__ALGOMODE__) == CRYP_ALGOMODE_ENCRYPT) || \ | |
((__ALGOMODE__) == CRYP_ALGOMODE_KEYDERIVATION) || \ | |
((__ALGOMODE__) == CRYP_ALGOMODE_DECRYPT) || \ | |
((__ALGOMODE__) == CRYP_ALGOMODE_TAG_GENERATION) || \ | |
((__ALGOMODE__) == CRYP_ALGOMODE_KEYDERIVATION_DECRYPT)) | |
/** | |
* @brief Verify the selected CRYP chaining algorithm. | |
* @param __CHAINMODE__: Selected CRYP chaining algorithm. | |
* @retval SET (__CHAINMODE__ is valid) or RESET (__CHAINMODE__ is invalid) | |
*/ | |
#if defined(AES_CR_NPBLB) | |
#define IS_CRYP_CHAINMODE(__CHAINMODE__) (((__CHAINMODE__) == CRYP_CHAINMODE_AES_ECB) || \ | |
((__CHAINMODE__) == CRYP_CHAINMODE_AES_CBC) || \ | |
((__CHAINMODE__) == CRYP_CHAINMODE_AES_CTR) || \ | |
((__CHAINMODE__) == CRYP_CHAINMODE_AES_GCM_GMAC) || \ | |
((__CHAINMODE__) == CRYP_CHAINMODE_AES_CCM_CMAC)) | |
#else | |
#define IS_CRYP_CHAINMODE(__CHAINMODE__) (((__CHAINMODE__) == CRYP_CHAINMODE_AES_ECB) || \ | |
((__CHAINMODE__) == CRYP_CHAINMODE_AES_CBC) || \ | |
((__CHAINMODE__) == CRYP_CHAINMODE_AES_CTR) || \ | |
((__CHAINMODE__) == CRYP_CHAINMODE_AES_GCM_GMAC) || \ | |
((__CHAINMODE__) == CRYP_CHAINMODE_AES_CMAC)) | |
#endif | |
/** | |
* @brief Verify the deciphering key write option. | |
* @param __WRITE__: deciphering key write option. | |
* @retval SET (__WRITE__ is valid) or RESET (__WRITE__ is invalid) | |
*/ | |
#define IS_CRYP_WRITE(__WRITE__) (((__WRITE__) == CRYP_KEY_WRITE_ENABLE) || \ | |
((__WRITE__) == CRYP_KEY_WRITE_DISABLE)) | |
/** | |
* @brief Verify the CRYP input data DMA mode. | |
* @param __MODE__: CRYP input data DMA mode. | |
* @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) | |
*/ | |
#define IS_CRYP_DMAIN(__MODE__) (((__MODE__) == CRYP_DMAIN_DISABLE) || \ | |
((__MODE__) == CRYP_DMAIN_ENABLE)) | |
/** | |
* @brief Verify the CRYP output data DMA mode. | |
* @param __MODE__: CRYP output data DMA mode. | |
* @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) | |
*/ | |
#define IS_CRYP_DMAOUT(__MODE__) (((__MODE__) == CRYP_DMAOUT_DISABLE) || \ | |
((__MODE__) == CRYP_DMAOUT_ENABLE)) | |
/** | |
* @brief Verify the CRYP AES ciphering/deciphering/authentication algorithm phase. | |
* @param __PHASE__: CRYP AES ciphering/deciphering/authentication algorithm phase. | |
* @retval SET (__PHASE__ is valid) or RESET (__PHASE__ is invalid) | |
*/ | |
#define IS_CRYP_GCMCMAC_PHASE(__PHASE__) (((__PHASE__) == CRYP_GCM_INIT_PHASE) || \ | |
((__PHASE__) == CRYP_GCMCMAC_HEADER_PHASE) || \ | |
((__PHASE__) == CRYP_GCM_PAYLOAD_PHASE) || \ | |
((__PHASE__) == CRYP_GCMCMAC_FINAL_PHASE)) | |
/** | |
* @} | |
*/ | |
/* Include CRYP HAL Extended module */ | |
#include "stm32f4xx_hal_cryp_ex.h" | |
/* Exported functions --------------------------------------------------------*/ | |
/** @addtogroup CRYP_Exported_Functions CRYP Exported Functions | |
* @{ | |
*/ | |
/** @addtogroup CRYP_Exported_Functions_Group1 Initialization and deinitialization functions | |
* @{ | |
*/ | |
/* Initialization/de-initialization functions ********************************/ | |
HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp); | |
HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp); | |
/* MSP initialization/de-initialization functions ****************************/ | |
void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp); | |
void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp); | |
/** | |
* @} | |
*/ | |
/** @addtogroup CRYP_Exported_Functions_Group2 AES processing functions | |
* @{ | |
*/ | |
/* AES encryption/decryption processing functions ****************************/ | |
/* AES encryption/decryption using polling ***********************************/ | |
HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout); | |
/* AES encryption/decryption using interrupt *********************************/ | |
HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); | |
HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); | |
HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); | |
HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); | |
HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); | |
HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); | |
/* AES encryption/decryption using DMA ***************************************/ | |
HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); | |
HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); | |
HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); | |
HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); | |
HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); | |
HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); | |
/** | |
* @} | |
*/ | |
/** @addtogroup CRYP_Exported_Functions_Group3 Callback functions | |
* @{ | |
*/ | |
/* CallBack functions ********************************************************/ | |
void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp); | |
void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp); | |
void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp); | |
/** | |
* @} | |
*/ | |
/** @addtogroup CRYP_Exported_Functions_Group4 CRYP IRQ handler | |
* @{ | |
*/ | |
/* AES interrupt handling function *******************************************/ | |
void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp); | |
/** | |
* @} | |
*/ | |
/** @addtogroup CRYP_Exported_Functions_Group5 Peripheral State functions | |
* @{ | |
*/ | |
/* Peripheral State functions ************************************************/ | |
HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp); | |
uint32_t HAL_CRYP_GetError(CRYP_HandleTypeDef *hcryp); | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
#endif /* AES */ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
#ifdef __cplusplus | |
} | |
#endif | |
#endif /* __STM32F4xx_HAL_CRYP_H */ | |
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |