| /* sensor_isl29035.c - driver for ISL29035 light sensor */ |
| |
| /* |
| * Copyright (c) 2016 Intel Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <arch/cpu.h> |
| #include <device.h> |
| #include <i2c.h> |
| #include <init.h> |
| #include <nanokernel.h> |
| #include <sensor.h> |
| #include <zephyr.h> |
| #include <misc/__assert.h> |
| |
| #include "sensor_isl29035.h" |
| |
| static int isl29035_sample_fetch(struct device *dev, enum sensor_channel chan) |
| { |
| struct isl29035_driver_data *drv_data = dev->driver_data; |
| uint8_t msb, lsb; |
| |
| __ASSERT_NO_MSG(chan == SENSOR_CHAN_ALL); |
| |
| if (i2c_reg_read_byte(drv_data->i2c, ISL29035_I2C_ADDRESS, |
| ISL29035_DATA_MSB_REG, &msb) < 0) { |
| return -EIO; |
| } |
| |
| if (i2c_reg_read_byte(drv_data->i2c, ISL29035_I2C_ADDRESS, |
| ISL29035_DATA_LSB_REG, &lsb) < 0) { |
| return -EIO; |
| } |
| |
| drv_data->data_sample = (msb << 8) + lsb; |
| |
| return 0; |
| } |
| |
| static int isl29035_channel_get(struct device *dev, |
| enum sensor_channel chan, |
| struct sensor_value *val) |
| { |
| struct isl29035_driver_data *drv_data = dev->driver_data; |
| uint64_t tmp; |
| |
| #if CONFIG_ISL29035_MODE_ALS |
| /* val = sample_val * lux_range / (2 ^ adc_data_bits) */ |
| tmp = (uint64_t)drv_data->data_sample * ISL29035_LUX_RANGE; |
| val->type = SENSOR_VALUE_TYPE_INT_PLUS_MICRO; |
| val->val1 = tmp >> ISL29035_ADC_DATA_BITS; |
| tmp = (tmp & ISL29035_ADC_DATA_MASK) * 1000000; |
| val->val2 = tmp >> ISL29035_ADC_DATA_BITS; |
| #elif CONFIG_ISL29035_MODE_IR |
| ARG_UNUSED(tmp); |
| val->type = SENSOR_VALUE_TYPE_INT; |
| val->val1 = drv_data->data_sample; |
| #endif |
| |
| return 0; |
| } |
| |
| static struct sensor_driver_api isl29035_api = { |
| #if CONFIG_ISL29035_TRIGGER |
| .attr_set = &isl29035_attr_set, |
| .trigger_set = &isl29035_trigger_set, |
| #endif |
| .sample_fetch = &isl29035_sample_fetch, |
| .channel_get = &isl29035_channel_get, |
| }; |
| |
| static int isl29035_init(struct device *dev) |
| { |
| struct isl29035_driver_data *drv_data = dev->driver_data; |
| |
| drv_data->i2c = device_get_binding(CONFIG_ISL29035_I2C_MASTER_DEV_NAME); |
| if (drv_data->i2c == NULL) { |
| SYS_LOG_DBG("Failed to get I2C device."); |
| return -EINVAL; |
| } |
| |
| drv_data->data_sample = 0; |
| |
| /* clear blownout status bit */ |
| if (i2c_reg_update_byte(drv_data->i2c, ISL29035_I2C_ADDRESS, |
| ISL29035_ID_REG, ISL29035_BOUT_MASK, 0) < 0) { |
| SYS_LOG_DBG("Failed to clear blownout status bit."); |
| return -EIO; |
| } |
| |
| /* set command registers to set default attributes */ |
| if (i2c_reg_write_byte(drv_data->i2c, ISL29035_I2C_ADDRESS, |
| ISL29035_COMMAND_I_REG, 0) < 0) { |
| SYS_LOG_DBG("Failed to clear COMMAND-I."); |
| return -EIO; |
| } |
| |
| if (i2c_reg_write_byte(drv_data->i2c, ISL29035_I2C_ADDRESS, |
| ISL29035_COMMAND_II_REG, 0) < 0) { |
| SYS_LOG_DBG("Failed to clear COMMAND-II."); |
| return -EIO; |
| } |
| |
| /* set operation mode */ |
| if (i2c_reg_update_byte(drv_data->i2c, ISL29035_I2C_ADDRESS, |
| ISL29035_COMMAND_I_REG, |
| ISL29035_OPMODE_MASK, |
| ISL29035_ACTIVE_OPMODE_BITS) < 0) { |
| SYS_LOG_DBG("Failed to set opmode."); |
| return -EIO; |
| } |
| |
| /* set lux range */ |
| if (i2c_reg_update_byte(drv_data->i2c, ISL29035_I2C_ADDRESS, |
| ISL29035_COMMAND_II_REG, |
| ISL29035_LUX_RANGE_MASK, |
| ISL29035_LUX_RANGE_BITS) < 0) { |
| SYS_LOG_DBG("Failed to set lux range."); |
| return -EIO; |
| } |
| |
| /* set ADC resolution */ |
| if (i2c_reg_update_byte(drv_data->i2c, ISL29035_I2C_ADDRESS, |
| ISL29035_COMMAND_II_REG, |
| ISL29035_ADC_RES_MASK, |
| ISL29035_ADC_RES_BITS) < 0) { |
| SYS_LOG_DBG("Failed to set ADC resolution."); |
| return -EIO; |
| } |
| |
| #ifdef CONFIG_ISL29035_TRIGGER |
| if (isl29035_init_interrupt(dev) < 0) { |
| SYS_LOG_DBG("Failed to initialize interrupt."); |
| return -EIO; |
| } |
| #endif |
| |
| dev->driver_api = &isl29035_api; |
| |
| return 0; |
| } |
| |
| struct isl29035_driver_data isl29035_data; |
| |
| DEVICE_INIT(isl29035_dev, CONFIG_ISL29035_NAME, &isl29035_init, |
| &isl29035_data, NULL, SECONDARY, CONFIG_ISL29035_INIT_PRIORITY); |