blob: dc023998b1ead95dadab88351fc4172f89accf9f [file] [log] [blame]
/*
* Copyright (c) 2016 Nordic Semiconductor ASA
* Copyright (c) 2016 Vinayak Kariappa Chettimada
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <soc.h>
#include <errno.h>
#include <atomic.h>
#include <device.h>
#include <clock_control.h>
#include <misc/__assert.h>
#include <arch/arm/cortex_m/cmsis.h>
static u8_t m16src_ref;
static u8_t m16src_grd;
static int _m16src_start(struct device *dev, clock_control_subsys_t sub_system)
{
u32_t imask;
bool blocking;
/* If the clock is already started then just increment refcount.
* If the start and stop don't happen in pairs, a rollover will
* be caught and in that case system should assert.
*/
/* Test for reference increment from zero and resource guard not taken.
*/
imask = irq_lock();
if (m16src_ref++) {
irq_unlock(imask);
goto hf_already_started;
}
if (m16src_grd) {
m16src_ref--;
irq_unlock(imask);
return -EAGAIN;
}
m16src_grd = 1;
irq_unlock(imask);
/* If blocking then spin-wait in CPU sleep until 16MHz clock settles. */
blocking = POINTER_TO_UINT(sub_system);
if (blocking) {
u32_t intenset;
irq_disable(POWER_CLOCK_IRQn);
NRF_CLOCK->EVENTS_HFCLKSTARTED = 0;
intenset = NRF_CLOCK->INTENSET;
NRF_CLOCK->INTENSET = CLOCK_INTENSET_HFCLKSTARTED_Msk;
NRF_CLOCK->TASKS_HFCLKSTART = 1;
while (NRF_CLOCK->EVENTS_HFCLKSTARTED == 0) {
__WFE();
__SEV();
__WFE();
}
NRF_CLOCK->EVENTS_HFCLKSTARTED = 0;
if (!(intenset & CLOCK_INTENSET_HFCLKSTARTED_Msk)) {
NRF_CLOCK->INTENCLR = CLOCK_INTENCLR_HFCLKSTARTED_Msk;
}
NVIC_ClearPendingIRQ(POWER_CLOCK_IRQn);
irq_enable(POWER_CLOCK_IRQn);
} else {
NRF_CLOCK->EVENTS_HFCLKSTARTED = 0;
NRF_CLOCK->TASKS_HFCLKSTART = 1;
}
/* release resource guard */
m16src_grd = 0;
hf_already_started:
/* rollover should not happen as start and stop shall be
* called in pairs.
*/
__ASSERT_NO_MSG(m16src_ref);
if (NRF_CLOCK->HFCLKSTAT & CLOCK_HFCLKSTAT_STATE_Msk) {
return 0;
} else {
return -EINPROGRESS;
}
}
static int _m16src_stop(struct device *dev, clock_control_subsys_t sub_system)
{
u32_t imask;
ARG_UNUSED(sub_system);
/* Test for started resource, if so, decrement reference and acquire
* resource guard.
*/
imask = irq_lock();
if (!m16src_ref) {
irq_unlock(imask);
return -EALREADY;
}
if (--m16src_ref) {
irq_unlock(imask);
return 0;
}
if (m16src_grd) {
m16src_ref++;
irq_unlock(imask);
return -EAGAIN;
}
m16src_grd = 1;
irq_unlock(imask);
/* re-entrancy and mult-context safe, and reference count is zero, */
NRF_CLOCK->TASKS_HFCLKSTOP = 1;
/* release resource guard */
m16src_grd = 0;
return 0;
}
static int _k32src_start(struct device *dev, clock_control_subsys_t sub_system)
{
u32_t lf_clk_src;
u32_t intenset;
/* TODO: implement the ref count and re-entrancy guard, if a use-case
* needs it.
*/
if ((NRF_CLOCK->LFCLKSTAT & CLOCK_LFCLKSTAT_STATE_Msk)) {
return 0;
}
irq_disable(POWER_CLOCK_IRQn);
NRF_CLOCK->EVENTS_LFCLKSTARTED = 0;
intenset = NRF_CLOCK->INTENSET;
NRF_CLOCK->INTENSET = CLOCK_INTENSET_LFCLKSTARTED_Msk;
/* Set LF Clock Source */
lf_clk_src = POINTER_TO_UINT(sub_system);
NRF_CLOCK->LFCLKSRC = lf_clk_src;
/* Start and spin-wait until clock settles */
NRF_CLOCK->TASKS_LFCLKSTART = 1;
while (NRF_CLOCK->EVENTS_LFCLKSTARTED == 0) {
__WFE();
__SEV();
__WFE();
}
NRF_CLOCK->EVENTS_LFCLKSTARTED = 0;
if (!(intenset & CLOCK_INTENSET_LFCLKSTARTED_Msk)) {
NRF_CLOCK->INTENCLR = CLOCK_INTENCLR_LFCLKSTARTED_Msk;
}
NVIC_ClearPendingIRQ(POWER_CLOCK_IRQn);
irq_enable(POWER_CLOCK_IRQn);
/* If RC selected, calibrate and start timer for consecutive
* calibrations.
*/
NRF_CLOCK->INTENCLR = CLOCK_INTENCLR_DONE_Msk | CLOCK_INTENCLR_CTTO_Msk;
NRF_CLOCK->EVENTS_DONE = 0;
NRF_CLOCK->EVENTS_CTTO = 0;
if ((lf_clk_src & CLOCK_LFCLKSRC_SRC_Msk) == CLOCK_LFCLKSRC_SRC_RC) {
int err;
/* Set the Calibration Timer Initial Value */
NRF_CLOCK->CTIV = 16; /* 4s in 0.25s units */
/* Enable DONE and CTTO IRQs */
NRF_CLOCK->INTENSET =
CLOCK_INTENSET_DONE_Msk | CLOCK_INTENSET_CTTO_Msk;
/* Start HF clock, if already started then explicitly
* assert IRQ.
* NOTE: The INTENSET is used as state flag to start
* calibration in ISR.
*/
NRF_CLOCK->INTENSET = CLOCK_INTENSET_HFCLKSTARTED_Msk;
err = _m16src_start(dev, false);
if (!err) {
NVIC_SetPendingIRQ(POWER_CLOCK_IRQn);
} else {
__ASSERT_NO_MSG(err == -EINPROGRESS);
}
}
return !(NRF_CLOCK->LFCLKSTAT & CLOCK_LFCLKSTAT_STATE_Msk);
}
static void _power_clock_isr(void *arg)
{
u8_t pof, hf_intenset, hf_stat, hf, lf, done, ctto;
struct device *dev = arg;
pof = (NRF_POWER->EVENTS_POFWARN != 0);
hf_intenset =
((NRF_CLOCK->INTENSET & CLOCK_INTENSET_HFCLKSTARTED_Msk) != 0);
hf_stat = ((NRF_CLOCK->HFCLKSTAT & CLOCK_HFCLKSTAT_STATE_Msk) != 0);
hf = (NRF_CLOCK->EVENTS_HFCLKSTARTED != 0);
lf = (NRF_CLOCK->EVENTS_LFCLKSTARTED != 0);
done = (NRF_CLOCK->EVENTS_DONE != 0);
ctto = (NRF_CLOCK->EVENTS_CTTO != 0);
__ASSERT_NO_MSG(pof || hf || hf_intenset || lf || done || ctto);
if (pof) {
NRF_POWER->EVENTS_POFWARN = 0;
}
if (hf) {
NRF_CLOCK->EVENTS_HFCLKSTARTED = 0;
}
if (hf_intenset && hf_stat) {
/* INTENSET is used as state flag to start calibration,
* hence clear it here.
*/
NRF_CLOCK->INTENCLR = CLOCK_INTENCLR_HFCLKSTARTED_Msk;
/* Start Calibration */
NRF_CLOCK->TASKS_CAL = 1;
}
if (lf) {
NRF_CLOCK->EVENTS_LFCLKSTARTED = 0;
__ASSERT_NO_MSG(0);
}
if (done) {
int err;
NRF_CLOCK->EVENTS_DONE = 0;
/* Calibration done, stop 16M Xtal. */
err = _m16src_stop(dev, NULL);
__ASSERT_NO_MSG(!err);
/* Start timer for next calibration. */
NRF_CLOCK->TASKS_CTSTART = 1;
}
if (ctto) {
int err;
NRF_CLOCK->EVENTS_CTTO = 0;
/* Start HF clock, if already started
* then explicitly assert IRQ; we use the INTENSET
* as a state flag to start calibration.
*/
NRF_CLOCK->INTENSET = CLOCK_INTENSET_HFCLKSTARTED_Msk;
err = _m16src_start(dev, false);
if (!err) {
NVIC_SetPendingIRQ(POWER_CLOCK_IRQn);
} else {
__ASSERT_NO_MSG(err == -EINPROGRESS);
}
}
}
static int _clock_control_init(struct device *dev)
{
/* TODO: Initialization will be called twice, once for 32KHz and then
* for 16 MHz clock. The vector is also shared for other power related
* features. Hence, design a better way to init IRQISR when adding
* power peripheral driver and/or new SoC series.
* NOTE: Currently the operations here are idempotent.
*/
IRQ_CONNECT(NRF5_IRQ_POWER_CLOCK_IRQn,
CONFIG_CLOCK_CONTROL_NRF5_IRQ_PRIORITY,
_power_clock_isr, 0, 0);
irq_enable(POWER_CLOCK_IRQn);
return 0;
}
static const struct clock_control_driver_api _m16src_clock_control_api = {
.on = _m16src_start,
.off = _m16src_stop,
.get_rate = NULL,
};
DEVICE_AND_API_INIT(clock_nrf5_m16src,
CONFIG_CLOCK_CONTROL_NRF5_M16SRC_DRV_NAME,
_clock_control_init, NULL, NULL, PRE_KERNEL_1,
CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
&_m16src_clock_control_api);
static const struct clock_control_driver_api _k32src_clock_control_api = {
.on = _k32src_start,
.off = NULL,
.get_rate = NULL,
};
DEVICE_AND_API_INIT(clock_nrf5_k32src,
CONFIG_CLOCK_CONTROL_NRF5_K32SRC_DRV_NAME,
_clock_control_init, NULL, NULL, PRE_KERNEL_1,
CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
&_k32src_clock_control_api);