| /* |
| * Copyright (c) 2023 STMicroelectronics |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <st/f0/stm32f031.dtsi> |
| |
| / { |
| |
| clocks { |
| clk_hsi48: clk-hsi48 { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <DT_FREQ_M(48)>; |
| status = "disabled"; |
| }; |
| }; |
| |
| soc { |
| compatible = "st,stm32f042", "st,stm32f0", "simple-bus"; |
| |
| |
| usart2: serial@40004400 { |
| compatible = "st,stm32-usart", "st,stm32-uart"; |
| reg = <0x40004400 0x400>; |
| clocks = <&rcc STM32_CLOCK(APB1, 17U)>; |
| resets = <&rctl STM32_RESET(APB1, 17U)>; |
| interrupts = <28 0>; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@40003800 { |
| compatible = "st,stm32-spi-fifo", "st,stm32-spi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x40003800 0x400>; |
| clocks = <&rcc STM32_CLOCK(APB1, 14U)>; |
| interrupts = <26 3>; |
| status = "disabled"; |
| }; |
| |
| can1: can@40006400 { |
| compatible = "st,stm32-bxcan"; |
| reg = <0x40006400 0x400>; |
| interrupts = <30 0>; |
| clocks = <&rcc STM32_CLOCK(APB1, 25U)>; |
| status = "disabled"; |
| }; |
| |
| timers15: timers@40014000 { |
| compatible = "st,stm32-timers"; |
| reg = <0x40014000 0x400>; |
| clocks = <&rcc STM32_CLOCK(APB2, 16U)>; |
| resets = <&rctl STM32_RESET(APB2, 16U)>; |
| interrupts = <20 0>; |
| interrupt-names = "global"; |
| st,prescaler = <0>; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| }; |
| |
| usb: usb@40005c00 { |
| compatible = "st,stm32-usb"; |
| reg = <0x40005c00 0x400>; |
| interrupts = <31 0>; |
| interrupt-names = "usb"; |
| num-bidir-endpoints = <8>; |
| ram-size = <1024>; |
| phys = <&usb_fs_phy>; |
| clocks = <&rcc STM32_CLOCK(APB1, 23U)>, |
| <&rcc STM32_SRC_PLLCLK USB_SEL(1)>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usb_fs_phy: usbphy { |
| compatible = "usb-nop-xceiv"; |
| #phy-cells = <0>; |
| }; |
| }; |
