dts/arm/st/f3/stm32f303.dtsi

/*
 * Copyright (c) 2017 I-SENSE group of ICCS
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <st/f3/stm32f3.dtsi>
#include <zephyr/dt-bindings/adc/stm32l4_adc.h>

/ {
	soc {
		compatible = "st,stm32f303", "st,stm32f3", "simple-bus";

		usb: usb@40005c00 {
			/* Remap USB_LP IRQ to enable use with CAN_1 */
			interrupts = <75 0>;
		};

		i2c2: i2c@40005800 {
			compatible = "st,stm32-i2c-v2";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x40005800 0x400>;
			clocks = <&rcc STM32_CLOCK(APB1, 22U)>,
				 /* I2C clock source should always be defined,
				  * even for the default value
				  */
				 <&rcc STM32_SRC_SYSCLK I2C2_SEL(1)>;
			interrupts = <33 0>, <34 0>;
			interrupt-names = "event", "error";
			status = "disabled";
		};

		spi2: spi@40003800 {
			compatible = "st,stm32-spi-fifo", "st,stm32-spi";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x40003800 0x400>;
			clocks = <&rcc STM32_CLOCK(APB1, 14U)>;
			interrupts = <36 5>;
			status = "disabled";
		};

		spi3: spi@40003c00 {
			compatible = "st,stm32-spi-fifo", "st,stm32-spi";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x40003c00 0x400>;
			clocks = <&rcc STM32_CLOCK(APB1, 15U)>;
			interrupts = <51 5>;
			status = "disabled";
		};

		uart5: serial@40005000 {
			compatible = "st,stm32-uart";
			reg = <0x40005000 0x400>;
			clocks = <&rcc STM32_CLOCK(APB1, 20U)>;
			resets = <&rctl STM32_RESET(APB1, 20U)>;
			interrupts = <53 0>;
			status = "disabled";
		};

		pinctrl: pin-controller@48000000 {

			gpioe: gpio@48001000 {
				compatible = "st,stm32-gpio";
				gpio-controller;
				#gpio-cells = <2>;
				reg = <0x48001000 0x400>;
				clocks = <&rcc STM32_CLOCK(AHB1, 21U)>;
			};
		};

		timers1: timers@40012c00 {
			compatible = "st,stm32-timers";
			reg = <0x40012c00 0x400>;
			clocks = <&rcc STM32_CLOCK(APB2, 11U)>;
			resets = <&rctl STM32_RESET(APB2, 11U)>;
			interrupts = <24 0>, <25 0>, <26 0>, <27 0>;
			interrupt-names = "brk", "up", "trgcom", "cc";
			st,prescaler = <0>;
			status = "disabled";

			pwm {
				compatible = "st,stm32-pwm";
				status = "disabled";
				#pwm-cells = <3>;
			};
		};

		timers4: timers@40000800 {
			compatible = "st,stm32-timers";
			reg = <0x40000800 0x400>;
			clocks = <&rcc STM32_CLOCK(APB1, 2U)>;
			resets = <&rctl STM32_RESET(APB1, 2U)>;
			interrupts = <30 0>;
			interrupt-names = "global";
			st,prescaler = <0>;
			status = "disabled";

			pwm {
				compatible = "st,stm32-pwm";
				status = "disabled";
				#pwm-cells = <3>;
			};
		};

		timers8: timers@40013400 {
			compatible = "st,stm32-timers";
			reg = <0x40013400 0x400>;
			clocks = <&rcc STM32_CLOCK(APB2, 13U)>;
			resets = <&rctl STM32_RESET(APB2, 13U)>;
			interrupts = <43 0>, <44 0>, <45 0>, <46 0>;
			interrupt-names = "brk", "up", "trgcom", "cc";
			st,prescaler = <0>;
			status = "disabled";

			pwm {
				compatible = "st,stm32-pwm";
				status = "disabled";
				#pwm-cells = <3>;
			};
		};

		timers20: timers@40015000 {
			compatible = "st,stm32-timers";
			reg = <0x40015000 0x400>;
			clocks = <&rcc STM32_CLOCK(APB2, 20U)>;
			resets = <&rctl STM32_RESET(APB2, 20U)>;
			interrupts = <77 0>, <78 0>, <79 0>, <80 0>;
			interrupt-names = "brk", "up", "trgcom", "cc";
			st,prescaler = <0>;
			status = "disabled";

			pwm {
				compatible = "st,stm32-pwm";
				status = "disabled";
				#pwm-cells = <3>;
			};
		};

		adc1: adc@50000000 {
			compatible = "st,stm32-adc";
			reg = <0x50000000 0x400>;
			clocks = <&rcc STM32_CLOCK(AHB1, 28U)>;
			interrupts = <18 0>;
			status = "disabled";
			vref-mv = <3000>;
			#io-channel-cells = <1>;
			resolutions = <STM32_ADC_RES(12, 0x00)
				       STM32_ADC_RES(10, 0x01)
				       STM32_ADC_RES(8, 0x02)
				       STM32_ADC_RES(6, 0x03)>;
			sampling-times = <2 3 5 8 20 62 182 602>;
			st,adc-sequencer = <FULLY_CONFIGURABLE>;
		};

		adc2: adc@50000100 {
			compatible = "st,stm32-adc";
			reg = <0x50000100 0x4c>;
			clocks = <&rcc STM32_CLOCK(AHB1, 28U)>;
			interrupts = <18 0>;
			status = "disabled";
			vref-mv = <3000>;
			#io-channel-cells = <1>;
			resolutions = <STM32_ADC_RES(12, 0x00)
				       STM32_ADC_RES(10, 0x01)
				       STM32_ADC_RES(8, 0x02)
				       STM32_ADC_RES(6, 0x03)>;
			sampling-times = <2 3 5 8 20 62 182 602>;
			st,adc-sequencer = <FULLY_CONFIGURABLE>;
		};
	};

	smbus2: smbus2 {
		compatible = "st,stm32-smbus";
		#address-cells = <1>;
		#size-cells = <0>;
		i2c = <&i2c2>;
		status = "disabled";
	};
};