| /* |
| * Copyright (c) 2024 Nordic Semiconductor ASA |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <mem.h> |
| #include <nordic/nrf_common.dtsi> |
| #include <zephyr/dt-bindings/adc/nrf-saadc-nrf54l.h> |
| #include <zephyr/dt-bindings/regulator/nrf5x.h> |
| |
| /delete-node/ &sw_pwm; |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpuapp: cpu@0 { |
| compatible = "arm,cortex-m33f"; |
| reg = <0>; |
| device_type = "cpu"; |
| clock-frequency = <DT_FREQ_M(128)>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| itm: itm@e0000000 { |
| compatible = "arm,armv8m-itm"; |
| reg = <0xe0000000 0x1000>; |
| swo-ref-frequency = <DT_FREQ_M(128)>; |
| }; |
| }; |
| }; |
| |
| clocks { |
| lfxo: lfxo { |
| compatible = "nordic,nrf-lfxo"; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| }; |
| |
| hfxo: hfxo { |
| compatible = "nordic,nrf-hfxo"; |
| #clock-cells = <0>; |
| clock-frequency = <DT_FREQ_M(32)>; |
| }; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| ficr: ficr@ffc000 { |
| compatible = "nordic,nrf-ficr"; |
| reg = <0xffc000 0x1000>; |
| #nordic,ficr-cells = <1>; |
| }; |
| |
| uicr: uicr@ffd000 { |
| compatible = "nordic,nrf-uicr"; |
| reg = <0xffd000 0x1000>; |
| }; |
| |
| cpuapp_sram: memory@20000000 { |
| compatible = "mmio-sram"; |
| reg = <0x20000000 DT_SIZE_K(511)>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x20000000 0x7fc00>; |
| }; |
| |
| global_peripherals: peripheral@50000000 { |
| ranges = <0x0 0x50000000 0x10000000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| dppic00: dppic@42000 { |
| compatible = "nordic,nrf-dppic"; |
| reg = <0x42000 0x808>; |
| status = "disabled"; |
| }; |
| |
| ppib00: ppib@44000 { |
| compatible = "nordic,nrf-ppib"; |
| reg = <0x44000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| ppib01: ppib@45000 { |
| compatible = "nordic,nrf-ppib"; |
| reg = <0x45000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| spi00: spi@4d000 { |
| /* |
| * This spi node can be either SPIM or SPIS, |
| * for the user to pick: |
| * compatible = "nordic,nrf-spim" or |
| * "nordic,nrf-spis". |
| */ |
| compatible = "nordic,nrf-spim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x4d000 0x1000>; |
| interrupts = <77 NRF_DEFAULT_IRQ_PRIORITY>; |
| max-frequency = <DT_FREQ_M(32)>; |
| easydma-maxcnt-bits = <16>; |
| rx-delay-supported; |
| rx-delay = <1>; |
| status = "disabled"; |
| }; |
| |
| uart00: uart@4d000 { |
| compatible = "nordic,nrf-uarte"; |
| reg = <0x4d000 0x1000>; |
| interrupts = <77 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| endtx-stoptx-supported; |
| frame-timeout-supported; |
| }; |
| |
| gpio2: gpio@50400 { |
| compatible = "nordic,nrf-gpio"; |
| gpio-controller; |
| reg = <0x50400 0x300>; |
| #gpio-cells = <2>; |
| ngpios = <11>; |
| status = "disabled"; |
| port = <2>; |
| }; |
| |
| timer00: timer@55000 { |
| compatible = "nordic,nrf-timer"; |
| status = "disabled"; |
| reg = <0x55000 0x1000>; |
| cc-num = <6>; |
| max-bit-width = <32>; |
| interrupts = <85 NRF_DEFAULT_IRQ_PRIORITY>; |
| max-frequency = <DT_FREQ_M(128)>; |
| prescaler = <0>; |
| }; |
| |
| dppic10: dppic@82000 { |
| compatible = "nordic,nrf-dppic"; |
| reg = <0x82000 0x808>; |
| status = "disabled"; |
| }; |
| |
| ppib10: ppib@83000 { |
| compatible = "nordic,nrf-ppib"; |
| reg = <0x83000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| ppib11: ppib@84000 { |
| compatible = "nordic,nrf-ppib"; |
| reg = <0x84000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| timer10: timer@85000 { |
| compatible = "nordic,nrf-timer"; |
| status = "disabled"; |
| reg = <0x85000 0x1000>; |
| cc-num = <8>; |
| max-bit-width = <32>; |
| interrupts = <133 NRF_DEFAULT_IRQ_PRIORITY>; |
| max-frequency = <DT_FREQ_M(32)>; |
| prescaler = <0>; |
| }; |
| |
| egu10: egu@87000 { |
| compatible = "nordic,nrf-egu"; |
| reg = <0x87000 0x1000>; |
| interrupts = <135 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| radio: radio@8a000 { |
| compatible = "nordic,nrf-radio"; |
| reg = <0x8a000 0x1000>; |
| interrupts = <138 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| dfe-supported; |
| ieee802154-supported; |
| ble-2mbps-supported; |
| ble-coded-phy-supported; |
| |
| ieee802154: ieee802154 { |
| compatible = "nordic,nrf-ieee802154"; |
| status = "disabled"; |
| }; |
| |
| /* Note: In the nRF Connect SDK the SoftDevice Controller |
| * is added and set as the default Bluetooth Controller. |
| */ |
| bt_hci_controller: bt_hci_controller { |
| compatible = "zephyr,bt-hci-ll-sw-split"; |
| status = "disabled"; |
| }; |
| }; |
| |
| dppic20: dppic@c2000 { |
| compatible = "nordic,nrf-dppic"; |
| reg = <0xc2000 0x808>; |
| status = "disabled"; |
| }; |
| |
| ppib20: ppib@c3000 { |
| compatible = "nordic,nrf-ppib"; |
| reg = <0xc3000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| ppib21: ppib@c4000 { |
| compatible = "nordic,nrf-ppib"; |
| reg = <0xc4000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| ppib22: ppib@c5000 { |
| compatible = "nordic,nrf-ppib"; |
| reg = <0xc5000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| i2c20: i2c@c6000 { |
| compatible = "nordic,nrf-twim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xc6000 0x1000>; |
| interrupts = <198 NRF_DEFAULT_IRQ_PRIORITY>; |
| easydma-maxcnt-bits = <16>; |
| status = "disabled"; |
| zephyr,pm-device-runtime-auto; |
| }; |
| |
| spi20: spi@c6000 { |
| /* |
| * This spi node can be either SPIM or SPIS, |
| * for the user to pick: |
| * compatible = "nordic,nrf-spim" or |
| * "nordic,nrf-spis". |
| */ |
| compatible = "nordic,nrf-spim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xc6000 0x1000>; |
| interrupts = <198 NRF_DEFAULT_IRQ_PRIORITY>; |
| max-frequency = <DT_FREQ_M(8)>; |
| easydma-maxcnt-bits = <16>; |
| rx-delay-supported; |
| rx-delay = <1>; |
| status = "disabled"; |
| }; |
| |
| uart20: uart@c6000 { |
| compatible = "nordic,nrf-uarte"; |
| reg = <0xc6000 0x1000>; |
| interrupts = <198 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| endtx-stoptx-supported; |
| frame-timeout-supported; |
| }; |
| |
| i2c21: i2c@c7000 { |
| compatible = "nordic,nrf-twim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xc7000 0x1000>; |
| interrupts = <199 NRF_DEFAULT_IRQ_PRIORITY>; |
| easydma-maxcnt-bits = <16>; |
| status = "disabled"; |
| zephyr,pm-device-runtime-auto; |
| }; |
| |
| spi21: spi@c7000 { |
| /* |
| * This spi node can be either SPIM or SPIS, |
| * for the user to pick: |
| * compatible = "nordic,nrf-spim" or |
| * "nordic,nrf-spis". |
| */ |
| compatible = "nordic,nrf-spim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xc7000 0x1000>; |
| interrupts = <199 NRF_DEFAULT_IRQ_PRIORITY>; |
| max-frequency = <DT_FREQ_M(8)>; |
| easydma-maxcnt-bits = <16>; |
| rx-delay-supported; |
| rx-delay = <1>; |
| status = "disabled"; |
| }; |
| |
| uart21: uart@c7000 { |
| compatible = "nordic,nrf-uarte"; |
| reg = <0xc7000 0x1000>; |
| interrupts = <199 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| endtx-stoptx-supported; |
| frame-timeout-supported; |
| }; |
| |
| i2c22: i2c@c8000 { |
| compatible = "nordic,nrf-twim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xc8000 0x1000>; |
| interrupts = <200 NRF_DEFAULT_IRQ_PRIORITY>; |
| easydma-maxcnt-bits = <16>; |
| status = "disabled"; |
| zephyr,pm-device-runtime-auto; |
| }; |
| |
| spi22: spi@c8000 { |
| /* |
| * This spi node can be either SPIM or SPIS, |
| * for the user to pick: |
| * compatible = "nordic,nrf-spim" or |
| * "nordic,nrf-spis". |
| */ |
| compatible = "nordic,nrf-spim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xc8000 0x1000>; |
| interrupts = <200 NRF_DEFAULT_IRQ_PRIORITY>; |
| max-frequency = <DT_FREQ_M(8)>; |
| easydma-maxcnt-bits = <16>; |
| rx-delay-supported; |
| rx-delay = <1>; |
| status = "disabled"; |
| }; |
| |
| uart22: uart@c8000 { |
| compatible = "nordic,nrf-uarte"; |
| reg = <0xc8000 0x1000>; |
| interrupts = <200 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| endtx-stoptx-supported; |
| frame-timeout-supported; |
| }; |
| |
| egu20: egu@c9000 { |
| compatible = "nordic,nrf-egu"; |
| reg = <0xc9000 0x1000>; |
| interrupts = <201 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| timer20: timer@ca000 { |
| compatible = "nordic,nrf-timer"; |
| status = "disabled"; |
| reg = <0xca000 0x1000>; |
| cc-num = <6>; |
| max-bit-width = <32>; |
| interrupts = <202 NRF_DEFAULT_IRQ_PRIORITY>; |
| prescaler = <0>; |
| }; |
| |
| timer21: timer@cb000 { |
| compatible = "nordic,nrf-timer"; |
| status = "disabled"; |
| reg = <0xcb000 0x1000>; |
| cc-num = <6>; |
| max-bit-width = <32>; |
| interrupts = <203 NRF_DEFAULT_IRQ_PRIORITY>; |
| prescaler = <0>; |
| }; |
| |
| timer22: timer@cc000 { |
| compatible = "nordic,nrf-timer"; |
| status = "disabled"; |
| reg = <0xcc000 0x1000>; |
| cc-num = <6>; |
| max-bit-width = <32>; |
| interrupts = <204 NRF_DEFAULT_IRQ_PRIORITY>; |
| prescaler = <0>; |
| }; |
| |
| timer23: timer@cd000 { |
| compatible = "nordic,nrf-timer"; |
| status = "disabled"; |
| reg = <0xcd000 0x1000>; |
| cc-num = <6>; |
| max-bit-width = <32>; |
| interrupts = <205 NRF_DEFAULT_IRQ_PRIORITY>; |
| prescaler = <0>; |
| }; |
| |
| timer24: timer@ce000 { |
| compatible = "nordic,nrf-timer"; |
| status = "disabled"; |
| reg = <0xce000 0x1000>; |
| cc-num = <6>; |
| max-bit-width = <32>; |
| interrupts = <206 NRF_DEFAULT_IRQ_PRIORITY>; |
| prescaler = <0>; |
| }; |
| |
| pdm20: pdm@d0000 { |
| compatible = "nordic,nrf-pdm"; |
| status = "disabled"; |
| reg = <0xd0000 0x1000>; |
| interrupts = <208 NRF_DEFAULT_IRQ_PRIORITY>; |
| }; |
| |
| pdm21: pdm@d1000 { |
| compatible = "nordic,nrf-pdm"; |
| status = "disabled"; |
| reg = <0xd1000 0x1000>; |
| interrupts = <209 NRF_DEFAULT_IRQ_PRIORITY>; |
| }; |
| |
| pwm20: pwm@d2000 { |
| compatible = "nordic,nrf-pwm"; |
| status = "disabled"; |
| reg = <0xd2000 0x1000>; |
| interrupts = <210 NRF_DEFAULT_IRQ_PRIORITY>; |
| #pwm-cells = <3>; |
| }; |
| |
| pwm21: pwm@d3000 { |
| compatible = "nordic,nrf-pwm"; |
| status = "disabled"; |
| reg = <0xd3000 0x1000>; |
| interrupts = <211 NRF_DEFAULT_IRQ_PRIORITY>; |
| #pwm-cells = <3>; |
| }; |
| |
| pwm22: pwm@d4000 { |
| compatible = "nordic,nrf-pwm"; |
| status = "disabled"; |
| reg = <0xd4000 0x1000>; |
| interrupts = <212 NRF_DEFAULT_IRQ_PRIORITY>; |
| #pwm-cells = <3>; |
| }; |
| |
| adc: adc@d5000 { |
| compatible = "nordic,nrf-saadc"; |
| reg = <0xd5000 0x1000>; |
| interrupts = <213 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| #io-channel-cells = <1>; |
| }; |
| |
| nfct: nfct@d6000 { |
| compatible = "nordic,nrf-nfct"; |
| reg = <0xd6000 0x1000>; |
| interrupts = <214 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| temp: temp@d7000 { |
| compatible = "nordic,nrf-temp"; |
| reg = <0xd7000 0x1000>; |
| interrupts = <215 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| gpio1: gpio@d8200 { |
| compatible = "nordic,nrf-gpio"; |
| gpio-controller; |
| reg = <0xd8200 0x300>; |
| #gpio-cells = <2>; |
| ngpios = <16>; |
| status = "disabled"; |
| port = <1>; |
| gpiote-instance = <&gpiote20>; |
| }; |
| |
| gpiote20: gpiote@da000 { |
| compatible = "nordic,nrf-gpiote"; |
| reg = <0xda000 0x1000>; |
| status = "disabled"; |
| instance = <20>; |
| }; |
| |
| qdec20: qdec@e0000 { |
| compatible = "nordic,nrf-qdec"; |
| reg = <0xe0000 0x1000>; |
| interrupts = <224 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| qdec21: qdec@e1000 { |
| compatible = "nordic,nrf-qdec"; |
| reg = <0xe1000 0x1000>; |
| interrupts = <225 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| grtc: grtc@e2000 { |
| compatible = "nordic,nrf-grtc"; |
| reg = <0xe2000 0x1000>; |
| cc-num = <12>; |
| status = "disabled"; |
| }; |
| |
| dppic30: dppic@102000 { |
| compatible = "nordic,nrf-dppic"; |
| reg = <0x102000 0x808>; |
| status = "disabled"; |
| }; |
| |
| ppib30: ppib@103000 { |
| compatible = "nordic,nrf-ppib"; |
| reg = <0x103000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| i2c30: i2c@104000 { |
| compatible = "nordic,nrf-twim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x104000 0x1000>; |
| interrupts = <260 NRF_DEFAULT_IRQ_PRIORITY>; |
| easydma-maxcnt-bits = <16>; |
| status = "disabled"; |
| zephyr,pm-device-runtime-auto; |
| }; |
| |
| spi30: spi@104000 { |
| /* |
| * This spi node can be either SPIM or SPIS, |
| * for the user to pick: |
| * compatible = "nordic,nrf-spim" or |
| * "nordic,nrf-spis". |
| */ |
| compatible = "nordic,nrf-spim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x104000 0x1000>; |
| interrupts = <260 NRF_DEFAULT_IRQ_PRIORITY>; |
| max-frequency = <DT_FREQ_M(8)>; |
| easydma-maxcnt-bits = <16>; |
| rx-delay-supported; |
| rx-delay = <1>; |
| status = "disabled"; |
| }; |
| |
| uart30: uart@104000 { |
| compatible = "nordic,nrf-uarte"; |
| reg = <0x104000 0x1000>; |
| interrupts = <260 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| endtx-stoptx-supported; |
| frame-timeout-supported; |
| }; |
| |
| wdt30: watchdog@108000 { |
| compatible = "nordic,nrf-wdt"; |
| reg = <0x108000 0x620>; |
| interrupts = <264 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| wdt31: watchdog@109000 { |
| compatible = "nordic,nrf-wdt"; |
| reg = <0x109000 0x620>; |
| interrupts = <265 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| gpio0: gpio@10a000 { |
| compatible = "nordic,nrf-gpio"; |
| gpio-controller; |
| reg = <0x10a000 0x300>; |
| #gpio-cells = <2>; |
| ngpios = <5>; |
| status = "disabled"; |
| port = <0>; |
| gpiote-instance = <&gpiote30>; |
| }; |
| |
| gpiote30: gpiote@10c000 { |
| compatible = "nordic,nrf-gpiote"; |
| reg = <0x10c000 0x1000>; |
| status = "disabled"; |
| instance = <30>; |
| }; |
| |
| clock: clock@10e000 { |
| compatible = "nordic,nrf-clock"; |
| reg = <0x10e000 0x1000>; |
| interrupts = <270 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| regulators: regulator@120000 { |
| compatible = "nordic,nrf54l-regulators"; |
| reg = <0x120000 0x1000>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| vregmain: regulator@120600 { |
| compatible = "nordic,nrf5x-regulator"; |
| reg = <0x120600 0x1>; |
| status = "disabled"; |
| regulator-name = "VREGMAIN"; |
| regulator-initial-mode = <NRF5X_REG_MODE_LDO>; |
| }; |
| }; |
| }; |
| |
| rram_controller: rram-controller@5004e000 { |
| compatible = "nordic,rram-controller"; |
| reg = <0x5004e000 0x1000>; |
| interrupts = <78 NRF_DEFAULT_IRQ_PRIORITY>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| cpuapp_rram: rram@0 { |
| compatible = "soc-nv-flash"; |
| reg = <0x0 DT_SIZE_K(2028)>; |
| erase-block-size = <4096>; |
| write-block-size = <16>; |
| }; |
| }; |
| |
| cpuapp_ppb: cpuapp-ppb-bus { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| cpuapp_nvic: interrupt-controller@e000e100 { |
| #address-cells = <1>; |
| compatible = "arm,v8m-nvic"; |
| reg = <0xe000e100 0xc00>; |
| arm,num-irq-priority-bits = <3>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| cpuapp_systick: timer@e000e010 { |
| compatible = "arm,armv8m-systick"; |
| reg = <0xe000e010 0x10>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| }; |
