| /* |
| * Copyright (c) 2018 Intel Corporation |
| * Copyright (c) 2023 Meta |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include "posix_internal.h" |
| #include "pthread_sched.h" |
| |
| #include <stdio.h> |
| |
| #include <zephyr/init.h> |
| #include <zephyr/kernel.h> |
| #include <zephyr/logging/log.h> |
| #include <zephyr/sys/atomic.h> |
| #include <zephyr/posix/pthread.h> |
| #include <zephyr/posix/unistd.h> |
| #include <zephyr/sys/sem.h> |
| #include <zephyr/sys/slist.h> |
| #include <zephyr/sys/util.h> |
| |
| #define ZEPHYR_TO_POSIX_PRIORITY(_zprio) \ |
| (((_zprio) < 0) ? (-1 * ((_zprio) + 1)) : (CONFIG_NUM_PREEMPT_PRIORITIES - (_zprio)-1)) |
| |
| #define POSIX_TO_ZEPHYR_PRIORITY(_prio, _pol) \ |
| (((_pol) == SCHED_FIFO) ? (-1 * ((_prio) + 1)) \ |
| : (CONFIG_NUM_PREEMPT_PRIORITIES - (_prio)-1)) |
| |
| #define DEFAULT_PTHREAD_PRIORITY \ |
| POSIX_TO_ZEPHYR_PRIORITY(K_LOWEST_APPLICATION_THREAD_PRIO, DEFAULT_PTHREAD_POLICY) |
| #define DEFAULT_PTHREAD_POLICY (IS_ENABLED(CONFIG_PREEMPT_ENABLED) ? SCHED_RR : SCHED_FIFO) |
| |
| #define PTHREAD_STACK_MAX BIT(CONFIG_POSIX_PTHREAD_ATTR_STACKSIZE_BITS) |
| #define PTHREAD_GUARD_MAX BIT_MASK(CONFIG_POSIX_PTHREAD_ATTR_GUARDSIZE_BITS) |
| |
| LOG_MODULE_REGISTER(pthread, CONFIG_PTHREAD_LOG_LEVEL); |
| |
| #ifdef CONFIG_DYNAMIC_THREAD_STACK_SIZE |
| #define DYNAMIC_STACK_SIZE CONFIG_DYNAMIC_THREAD_STACK_SIZE |
| #else |
| #define DYNAMIC_STACK_SIZE 0 |
| #endif |
| |
| static inline size_t __get_attr_stacksize(const struct posix_thread_attr *attr) |
| { |
| return attr->stacksize + 1; |
| } |
| |
| static inline void __set_attr_stacksize(struct posix_thread_attr *attr, size_t stacksize) |
| { |
| attr->stacksize = stacksize - 1; |
| } |
| |
| struct __pthread_cleanup { |
| void (*routine)(void *arg); |
| void *arg; |
| sys_snode_t node; |
| }; |
| |
| enum posix_thread_qid { |
| /* ready to be started via pthread_create() */ |
| POSIX_THREAD_READY_Q, |
| /* running */ |
| POSIX_THREAD_RUN_Q, |
| /* exited (either joinable or detached) */ |
| POSIX_THREAD_DONE_Q, |
| /* invalid */ |
| POSIX_THREAD_INVALID_Q, |
| }; |
| |
| /* only 2 bits in struct posix_thread_attr for schedpolicy */ |
| BUILD_ASSERT(SCHED_OTHER < BIT(2) && SCHED_FIFO < BIT(2) && SCHED_RR < BIT(2)); |
| |
| BUILD_ASSERT((PTHREAD_CREATE_DETACHED == 0 || PTHREAD_CREATE_JOINABLE == 0) && |
| (PTHREAD_CREATE_DETACHED == 1 || PTHREAD_CREATE_JOINABLE == 1)); |
| |
| BUILD_ASSERT((PTHREAD_CANCEL_ENABLE == 0 || PTHREAD_CANCEL_DISABLE == 0) && |
| (PTHREAD_CANCEL_ENABLE == 1 || PTHREAD_CANCEL_DISABLE == 1)); |
| |
| BUILD_ASSERT(CONFIG_POSIX_PTHREAD_ATTR_STACKSIZE_BITS + CONFIG_POSIX_PTHREAD_ATTR_GUARDSIZE_BITS <= |
| 32); |
| |
| static void posix_thread_recycle(void); |
| static sys_dlist_t posix_thread_q[] = { |
| SYS_DLIST_STATIC_INIT(&posix_thread_q[POSIX_THREAD_READY_Q]), |
| SYS_DLIST_STATIC_INIT(&posix_thread_q[POSIX_THREAD_RUN_Q]), |
| SYS_DLIST_STATIC_INIT(&posix_thread_q[POSIX_THREAD_DONE_Q]), |
| }; |
| static struct posix_thread posix_thread_pool[CONFIG_MAX_PTHREAD_COUNT]; |
| static SYS_SEM_DEFINE(pthread_pool_lock, 1, 1); |
| static int pthread_concurrency; |
| |
| static inline void posix_thread_q_set(struct posix_thread *t, enum posix_thread_qid qid) |
| { |
| switch (qid) { |
| case POSIX_THREAD_READY_Q: |
| case POSIX_THREAD_RUN_Q: |
| case POSIX_THREAD_DONE_Q: |
| sys_dlist_append(&posix_thread_q[qid], &t->q_node); |
| t->qid = qid; |
| break; |
| default: |
| __ASSERT(false, "cannot set invalid qid %d for posix thread %p", qid, t); |
| break; |
| } |
| } |
| |
| static inline enum posix_thread_qid posix_thread_q_get(struct posix_thread *t) |
| { |
| switch (t->qid) { |
| case POSIX_THREAD_READY_Q: |
| case POSIX_THREAD_RUN_Q: |
| case POSIX_THREAD_DONE_Q: |
| return t->qid; |
| default: |
| __ASSERT(false, "posix thread %p has invalid qid: %d", t, t->qid); |
| return POSIX_THREAD_INVALID_Q; |
| } |
| } |
| |
| /* |
| * We reserve the MSB to mark a pthread_t as initialized (from the |
| * perspective of the application). With a linear space, this means that |
| * the theoretical pthread_t range is [0,2147483647]. |
| */ |
| BUILD_ASSERT(CONFIG_POSIX_THREAD_THREADS_MAX < PTHREAD_OBJ_MASK_INIT, |
| "CONFIG_POSIX_THREAD_THREADS_MAX is too high"); |
| |
| static inline size_t posix_thread_to_offset(struct posix_thread *t) |
| { |
| return t - posix_thread_pool; |
| } |
| |
| static inline size_t get_posix_thread_idx(pthread_t pth) |
| { |
| return mark_pthread_obj_uninitialized(pth); |
| } |
| |
| struct posix_thread *to_posix_thread(pthread_t pthread) |
| { |
| struct posix_thread *t; |
| bool actually_initialized; |
| size_t bit = get_posix_thread_idx(pthread); |
| |
| /* if the provided thread does not claim to be initialized, its invalid */ |
| if (!is_pthread_obj_initialized(pthread)) { |
| LOG_DBG("pthread is not initialized (%x)", pthread); |
| return NULL; |
| } |
| |
| if (bit >= ARRAY_SIZE(posix_thread_pool)) { |
| LOG_DBG("Invalid pthread (%x)", pthread); |
| return NULL; |
| } |
| |
| t = &posix_thread_pool[bit]; |
| |
| /* |
| * Denote a pthread as "initialized" (i.e. allocated) if it is not in ready_q. |
| * This differs from other posix object allocation strategies because they use |
| * a bitarray to indicate whether an object has been allocated. |
| */ |
| actually_initialized = !(posix_thread_q_get(t) == POSIX_THREAD_READY_Q || |
| (posix_thread_q_get(t) == POSIX_THREAD_DONE_Q && |
| t->attr.detachstate == PTHREAD_CREATE_DETACHED)); |
| |
| if (!actually_initialized) { |
| LOG_DBG("Pthread claims to be initialized (%x)", pthread); |
| return NULL; |
| } |
| |
| return &posix_thread_pool[bit]; |
| } |
| |
| pthread_t pthread_self(void) |
| { |
| size_t bit; |
| struct posix_thread *t; |
| |
| t = (struct posix_thread *)CONTAINER_OF(k_current_get(), struct posix_thread, thread); |
| bit = posix_thread_to_offset(t); |
| |
| return mark_pthread_obj_initialized(bit); |
| } |
| |
| int pthread_equal(pthread_t pt1, pthread_t pt2) |
| { |
| return (pt1 == pt2); |
| } |
| |
| static inline void __z_pthread_cleanup_init(struct __pthread_cleanup *c, void (*routine)(void *arg), |
| void *arg) |
| { |
| *c = (struct __pthread_cleanup){ |
| .routine = routine, |
| .arg = arg, |
| .node = {0}, |
| }; |
| } |
| |
| void __z_pthread_cleanup_push(void *cleanup[3], void (*routine)(void *arg), void *arg) |
| { |
| struct posix_thread *t = NULL; |
| struct __pthread_cleanup *const c = (struct __pthread_cleanup *)cleanup; |
| |
| SYS_SEM_LOCK(&pthread_pool_lock) { |
| t = to_posix_thread(pthread_self()); |
| BUILD_ASSERT(3 * sizeof(void *) == sizeof(*c)); |
| __ASSERT_NO_MSG(t != NULL); |
| __ASSERT_NO_MSG(c != NULL); |
| __ASSERT_NO_MSG(routine != NULL); |
| __z_pthread_cleanup_init(c, routine, arg); |
| sys_slist_prepend(&t->cleanup_list, &c->node); |
| } |
| } |
| |
| void __z_pthread_cleanup_pop(int execute) |
| { |
| sys_snode_t *node; |
| struct __pthread_cleanup *c = NULL; |
| struct posix_thread *t = NULL; |
| |
| SYS_SEM_LOCK(&pthread_pool_lock) { |
| t = to_posix_thread(pthread_self()); |
| __ASSERT_NO_MSG(t != NULL); |
| node = sys_slist_get(&t->cleanup_list); |
| __ASSERT_NO_MSG(node != NULL); |
| c = CONTAINER_OF(node, struct __pthread_cleanup, node); |
| __ASSERT_NO_MSG(c != NULL); |
| __ASSERT_NO_MSG(c->routine != NULL); |
| } |
| if (execute) { |
| c->routine(c->arg); |
| } |
| } |
| |
| static bool is_posix_policy_prio_valid(int priority, int policy) |
| { |
| if (priority >= posix_sched_priority_min(policy) && |
| priority <= posix_sched_priority_max(policy)) { |
| return true; |
| } |
| |
| LOG_DBG("Invalid priority %d and / or policy %d", priority, policy); |
| |
| return false; |
| } |
| |
| /* Non-static so that they can be tested in ztest */ |
| int zephyr_to_posix_priority(int z_prio, int *policy) |
| { |
| int priority; |
| |
| if (z_prio < 0) { |
| __ASSERT_NO_MSG(-z_prio <= CONFIG_NUM_COOP_PRIORITIES); |
| } else { |
| __ASSERT_NO_MSG(z_prio < CONFIG_NUM_PREEMPT_PRIORITIES); |
| } |
| |
| *policy = (z_prio < 0) ? SCHED_FIFO : SCHED_RR; |
| priority = ZEPHYR_TO_POSIX_PRIORITY(z_prio); |
| __ASSERT_NO_MSG(is_posix_policy_prio_valid(priority, *policy)); |
| |
| return priority; |
| } |
| |
| /* Non-static so that they can be tested in ztest */ |
| int posix_to_zephyr_priority(int priority, int policy) |
| { |
| __ASSERT_NO_MSG(is_posix_policy_prio_valid(priority, policy)); |
| |
| return POSIX_TO_ZEPHYR_PRIORITY(priority, policy); |
| } |
| |
| static bool __attr_is_runnable(const struct posix_thread_attr *attr) |
| { |
| size_t stacksize; |
| |
| if (attr == NULL || attr->stack == NULL) { |
| LOG_DBG("attr %p is not initialized", attr); |
| return false; |
| } |
| |
| stacksize = __get_attr_stacksize(attr); |
| if (stacksize < PTHREAD_STACK_MIN) { |
| LOG_DBG("attr %p has stacksize %zu is smaller than PTHREAD_STACK_MIN (%zu)", attr, |
| stacksize, (size_t)PTHREAD_STACK_MIN); |
| return false; |
| } |
| |
| /* require a valid scheduler policy */ |
| if (!valid_posix_policy(attr->schedpolicy)) { |
| LOG_DBG("Invalid scheduler policy %d", attr->schedpolicy); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static bool __attr_is_initialized(const struct posix_thread_attr *attr) |
| { |
| if (IS_ENABLED(CONFIG_DYNAMIC_THREAD)) { |
| return __attr_is_runnable(attr); |
| } |
| |
| if (attr == NULL || !attr->initialized) { |
| LOG_DBG("attr %p is not initialized", attr); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /** |
| * @brief Set scheduling parameter attributes in thread attributes object. |
| * |
| * See IEEE 1003.1 |
| */ |
| int pthread_attr_setschedparam(pthread_attr_t *_attr, const struct sched_param *schedparam) |
| { |
| struct posix_thread_attr *attr = (struct posix_thread_attr *)_attr; |
| |
| if (!__attr_is_initialized(attr) || schedparam == NULL || |
| !is_posix_policy_prio_valid(schedparam->sched_priority, attr->schedpolicy)) { |
| LOG_DBG("Invalid pthread_attr_t or sched_param"); |
| return EINVAL; |
| } |
| |
| attr->priority = schedparam->sched_priority; |
| return 0; |
| } |
| |
| /** |
| * @brief Set stack attributes in thread attributes object. |
| * |
| * See IEEE 1003.1 |
| */ |
| int pthread_attr_setstack(pthread_attr_t *_attr, void *stackaddr, size_t stacksize) |
| { |
| int ret; |
| struct posix_thread_attr *attr = (struct posix_thread_attr *)_attr; |
| |
| if (stackaddr == NULL) { |
| LOG_DBG("NULL stack address"); |
| return EACCES; |
| } |
| |
| if (!__attr_is_initialized(attr) || stacksize == 0 || stacksize < PTHREAD_STACK_MIN || |
| stacksize > PTHREAD_STACK_MAX) { |
| LOG_DBG("Invalid stacksize %zu", stacksize); |
| return EINVAL; |
| } |
| |
| if (attr->stack != NULL) { |
| ret = k_thread_stack_free(attr->stack); |
| if (ret == 0) { |
| LOG_DBG("Freed attr %p thread stack %zu@%p", _attr, |
| __get_attr_stacksize(attr), attr->stack); |
| } |
| } |
| |
| attr->stack = stackaddr; |
| __set_attr_stacksize(attr, stacksize); |
| |
| LOG_DBG("Assigned thread stack %zu@%p to attr %p", __get_attr_stacksize(attr), attr->stack, |
| _attr); |
| |
| return 0; |
| } |
| |
| /** |
| * @brief Get scope attributes in thread attributes object. |
| * |
| * See IEEE 1003.1 |
| */ |
| int pthread_attr_getscope(const pthread_attr_t *_attr, int *contentionscope) |
| { |
| struct posix_thread_attr *attr = (struct posix_thread_attr *)_attr; |
| |
| if (!__attr_is_initialized(attr) || contentionscope == NULL) { |
| return EINVAL; |
| } |
| *contentionscope = attr->contentionscope; |
| return 0; |
| } |
| |
| /** |
| * @brief Set scope attributes in thread attributes object. |
| * |
| * See IEEE 1003.1 |
| */ |
| int pthread_attr_setscope(pthread_attr_t *_attr, int contentionscope) |
| { |
| struct posix_thread_attr *attr = (struct posix_thread_attr *)_attr; |
| |
| if (!__attr_is_initialized(attr)) { |
| LOG_DBG("attr %p is not initialized", attr); |
| return EINVAL; |
| } |
| if (!(contentionscope == PTHREAD_SCOPE_PROCESS || |
| contentionscope == PTHREAD_SCOPE_SYSTEM)) { |
| LOG_DBG("%s contentionscope %d", "Invalid", contentionscope); |
| return EINVAL; |
| } |
| if (contentionscope == PTHREAD_SCOPE_PROCESS) { |
| /* Zephyr does not yet support processes or process scheduling */ |
| LOG_DBG("%s contentionscope %d", "Unsupported", contentionscope); |
| return ENOTSUP; |
| } |
| attr->contentionscope = contentionscope; |
| return 0; |
| } |
| |
| /** |
| * @brief Get inherit scheduler attributes in thread attributes object. |
| * |
| * See IEEE 1003.1 |
| */ |
| int pthread_attr_getinheritsched(const pthread_attr_t *_attr, int *inheritsched) |
| { |
| struct posix_thread_attr *attr = (struct posix_thread_attr *)_attr; |
| |
| if (!__attr_is_initialized(attr) || inheritsched == NULL) { |
| return EINVAL; |
| } |
| *inheritsched = attr->inheritsched; |
| return 0; |
| } |
| |
| /** |
| * @brief Set inherit scheduler attributes in thread attributes object. |
| * |
| * See IEEE 1003.1 |
| */ |
| int pthread_attr_setinheritsched(pthread_attr_t *_attr, int inheritsched) |
| { |
| struct posix_thread_attr *attr = (struct posix_thread_attr *)_attr; |
| |
| if (!__attr_is_initialized(attr)) { |
| LOG_DBG("attr %p is not initialized", attr); |
| return EINVAL; |
| } |
| |
| if (inheritsched != PTHREAD_INHERIT_SCHED && inheritsched != PTHREAD_EXPLICIT_SCHED) { |
| LOG_DBG("Invalid inheritsched %d", inheritsched); |
| return EINVAL; |
| } |
| |
| attr->inheritsched = inheritsched; |
| return 0; |
| } |
| |
| static void posix_thread_recycle_work_handler(struct k_work *work) |
| { |
| ARG_UNUSED(work); |
| posix_thread_recycle(); |
| } |
| static K_WORK_DELAYABLE_DEFINE(posix_thread_recycle_work, posix_thread_recycle_work_handler); |
| |
| static void posix_thread_finalize(struct posix_thread *t, void *retval) |
| { |
| sys_snode_t *node_l; |
| pthread_key_obj *key_obj; |
| pthread_thread_data *thread_spec_data; |
| |
| SYS_SLIST_FOR_EACH_NODE(&t->key_list, node_l) { |
| thread_spec_data = (pthread_thread_data *)node_l; |
| if (thread_spec_data != NULL) { |
| key_obj = thread_spec_data->key; |
| if (key_obj->destructor != NULL) { |
| (key_obj->destructor)(thread_spec_data->spec_data); |
| } |
| } |
| } |
| |
| /* move thread from run_q to done_q */ |
| SYS_SEM_LOCK(&pthread_pool_lock) { |
| sys_dlist_remove(&t->q_node); |
| posix_thread_q_set(t, POSIX_THREAD_DONE_Q); |
| t->retval = retval; |
| } |
| |
| /* trigger recycle work */ |
| (void)k_work_schedule(&posix_thread_recycle_work, K_MSEC(CONFIG_PTHREAD_RECYCLER_DELAY_MS)); |
| |
| /* abort the underlying k_thread */ |
| k_thread_abort(&t->thread); |
| } |
| |
| FUNC_NORETURN |
| static void zephyr_thread_wrapper(void *arg1, void *arg2, void *arg3) |
| { |
| int err; |
| int barrier; |
| void *(*fun_ptr)(void *arg) = arg2; |
| struct posix_thread *t = CONTAINER_OF(k_current_get(), struct posix_thread, thread); |
| |
| if (IS_ENABLED(CONFIG_PTHREAD_CREATE_BARRIER)) { |
| /* cross the barrier so that pthread_create() can continue */ |
| barrier = POINTER_TO_UINT(arg3); |
| err = pthread_barrier_wait(&barrier); |
| __ASSERT_NO_MSG(err == 0 || err == PTHREAD_BARRIER_SERIAL_THREAD); |
| } |
| |
| posix_thread_finalize(t, fun_ptr(arg1)); |
| |
| CODE_UNREACHABLE; |
| } |
| |
| static void posix_thread_recycle(void) |
| { |
| struct posix_thread *t; |
| struct posix_thread *safe_t; |
| sys_dlist_t recyclables = SYS_DLIST_STATIC_INIT(&recyclables); |
| |
| SYS_SEM_LOCK(&pthread_pool_lock) { |
| SYS_DLIST_FOR_EACH_CONTAINER_SAFE(&posix_thread_q[POSIX_THREAD_DONE_Q], t, safe_t, |
| q_node) { |
| if (t->attr.detachstate == PTHREAD_CREATE_JOINABLE) { |
| /* thread has not been joined yet */ |
| continue; |
| } |
| |
| sys_dlist_remove(&t->q_node); |
| sys_dlist_append(&recyclables, &t->q_node); |
| } |
| } |
| |
| if (sys_dlist_is_empty(&recyclables)) { |
| return; |
| } |
| |
| LOG_DBG("Recycling %zu threads", sys_dlist_len(&recyclables)); |
| |
| SYS_DLIST_FOR_EACH_CONTAINER(&recyclables, t, q_node) { |
| if (t->attr.caller_destroys) { |
| t->attr = (struct posix_thread_attr){0}; |
| } else { |
| (void)pthread_attr_destroy((pthread_attr_t *)&t->attr); |
| } |
| } |
| |
| SYS_SEM_LOCK(&pthread_pool_lock) { |
| while (!sys_dlist_is_empty(&recyclables)) { |
| t = CONTAINER_OF(sys_dlist_get(&recyclables), struct posix_thread, q_node); |
| posix_thread_q_set(t, POSIX_THREAD_READY_Q); |
| } |
| } |
| } |
| |
| /** |
| * @brief Create a new thread. |
| * |
| * Pthread attribute should not be NULL. API will return Error on NULL |
| * attribute value. |
| * |
| * See IEEE 1003.1 |
| */ |
| int pthread_create(pthread_t *th, const pthread_attr_t *_attr, void *(*threadroutine)(void *), |
| void *arg) |
| { |
| int err; |
| pthread_barrier_t barrier; |
| struct posix_thread *t = NULL; |
| |
| if (!(_attr == NULL || __attr_is_runnable((struct posix_thread_attr *)_attr))) { |
| return EINVAL; |
| } |
| |
| /* reclaim resources greedily */ |
| posix_thread_recycle(); |
| |
| SYS_SEM_LOCK(&pthread_pool_lock) { |
| if (!sys_dlist_is_empty(&posix_thread_q[POSIX_THREAD_READY_Q])) { |
| t = CONTAINER_OF(sys_dlist_get(&posix_thread_q[POSIX_THREAD_READY_Q]), |
| struct posix_thread, q_node); |
| |
| /* initialize thread state */ |
| posix_thread_q_set(t, POSIX_THREAD_RUN_Q); |
| sys_slist_init(&t->key_list); |
| sys_slist_init(&t->cleanup_list); |
| } |
| } |
| |
| if (t != NULL && IS_ENABLED(CONFIG_PTHREAD_CREATE_BARRIER)) { |
| err = pthread_barrier_init(&barrier, NULL, 2); |
| if (err != 0) { |
| /* cannot allocate barrier. move thread back to ready_q */ |
| SYS_SEM_LOCK(&pthread_pool_lock) { |
| sys_dlist_remove(&t->q_node); |
| posix_thread_q_set(t, POSIX_THREAD_READY_Q); |
| } |
| t = NULL; |
| } |
| } |
| |
| if (t == NULL) { |
| /* no threads are ready */ |
| LOG_DBG("No threads are ready"); |
| return EAGAIN; |
| } |
| |
| if (_attr == NULL) { |
| err = pthread_attr_init((pthread_attr_t *)&t->attr); |
| if (err == 0 && !__attr_is_runnable(&t->attr)) { |
| (void)pthread_attr_destroy((pthread_attr_t *)&t->attr); |
| err = EINVAL; |
| } |
| if (err != 0) { |
| /* cannot allocate pthread attributes (e.g. stack) */ |
| SYS_SEM_LOCK(&pthread_pool_lock) { |
| sys_dlist_remove(&t->q_node); |
| posix_thread_q_set(t, POSIX_THREAD_READY_Q); |
| } |
| return err; |
| } |
| /* caller not responsible for destroying attr */ |
| t->attr.caller_destroys = false; |
| } else { |
| /* copy user-provided attr into thread, caller must destroy attr at a later time */ |
| t->attr = *(struct posix_thread_attr *)_attr; |
| } |
| |
| if (t->attr.inheritsched == PTHREAD_INHERIT_SCHED) { |
| int pol; |
| |
| t->attr.priority = |
| zephyr_to_posix_priority(k_thread_priority_get(k_current_get()), &pol); |
| t->attr.schedpolicy = pol; |
| } |
| |
| /* spawn the thread */ |
| k_thread_create( |
| &t->thread, t->attr.stack, __get_attr_stacksize(&t->attr) + t->attr.guardsize, |
| zephyr_thread_wrapper, (void *)arg, threadroutine, |
| IS_ENABLED(CONFIG_PTHREAD_CREATE_BARRIER) ? UINT_TO_POINTER(barrier) : NULL, |
| posix_to_zephyr_priority(t->attr.priority, t->attr.schedpolicy), 0, K_NO_WAIT); |
| |
| if (IS_ENABLED(CONFIG_PTHREAD_CREATE_BARRIER)) { |
| /* wait for the spawned thread to cross our barrier */ |
| err = pthread_barrier_wait(&barrier); |
| __ASSERT_NO_MSG(err == 0 || err == PTHREAD_BARRIER_SERIAL_THREAD); |
| err = pthread_barrier_destroy(&barrier); |
| __ASSERT_NO_MSG(err == 0); |
| } |
| |
| /* finally provide the initialized thread to the caller */ |
| *th = mark_pthread_obj_initialized(posix_thread_to_offset(t)); |
| |
| LOG_DBG("Created pthread %p", &t->thread); |
| |
| return 0; |
| } |
| |
| int pthread_getconcurrency(void) |
| { |
| int ret = 0; |
| |
| SYS_SEM_LOCK(&pthread_pool_lock) { |
| ret = pthread_concurrency; |
| } |
| |
| return ret; |
| } |
| |
| int pthread_setconcurrency(int new_level) |
| { |
| if (new_level < 0) { |
| return EINVAL; |
| } |
| |
| if (new_level > CONFIG_MP_MAX_NUM_CPUS) { |
| return EAGAIN; |
| } |
| |
| SYS_SEM_LOCK(&pthread_pool_lock) { |
| pthread_concurrency = new_level; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * @brief Set cancelability State. |
| * |
| * See IEEE 1003.1 |
| */ |
| int pthread_setcancelstate(int state, int *oldstate) |
| { |
| int ret = EINVAL; |
| bool cancel_pending = false; |
| struct posix_thread *t = NULL; |
| bool cancel_type = -1; |
| |
| if (state != PTHREAD_CANCEL_ENABLE && state != PTHREAD_CANCEL_DISABLE) { |
| LOG_DBG("Invalid pthread state %d", state); |
| return EINVAL; |
| } |
| |
| SYS_SEM_LOCK(&pthread_pool_lock) { |
| t = to_posix_thread(pthread_self()); |
| if (t == NULL) { |
| ret = EINVAL; |
| SYS_SEM_LOCK_BREAK; |
| } |
| |
| if (oldstate != NULL) { |
| *oldstate = t->attr.cancelstate; |
| } |
| |
| t->attr.cancelstate = state; |
| cancel_pending = t->attr.cancelpending; |
| cancel_type = t->attr.canceltype; |
| |
| ret = 0; |
| } |
| |
| if (ret == 0 && state == PTHREAD_CANCEL_ENABLE && |
| cancel_type == PTHREAD_CANCEL_ASYNCHRONOUS && cancel_pending) { |
| posix_thread_finalize(t, PTHREAD_CANCELED); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * @brief Set cancelability Type. |
| * |
| * See IEEE 1003.1 |
| */ |
| int pthread_setcanceltype(int type, int *oldtype) |
| { |
| int ret = EINVAL; |
| struct posix_thread *t; |
| |
| if (type != PTHREAD_CANCEL_DEFERRED && type != PTHREAD_CANCEL_ASYNCHRONOUS) { |
| LOG_DBG("Invalid pthread cancel type %d", type); |
| return EINVAL; |
| } |
| |
| SYS_SEM_LOCK(&pthread_pool_lock) { |
| t = to_posix_thread(pthread_self()); |
| if (t == NULL) { |
| ret = EINVAL; |
| SYS_SEM_LOCK_BREAK; |
| } |
| |
| if (oldtype != NULL) { |
| *oldtype = t->attr.canceltype; |
| } |
| t->attr.canceltype = type; |
| |
| ret = 0; |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * @brief Create a cancellation point in the calling thread. |
| * |
| * See IEEE 1003.1 |
| */ |
| void pthread_testcancel(void) |
| { |
| bool cancel_pended = false; |
| struct posix_thread *t = NULL; |
| |
| SYS_SEM_LOCK(&pthread_pool_lock) { |
| t = to_posix_thread(pthread_self()); |
| if (t == NULL) { |
| SYS_SEM_LOCK_BREAK; |
| } |
| if (t->attr.cancelstate != PTHREAD_CANCEL_ENABLE) { |
| SYS_SEM_LOCK_BREAK; |
| } |
| if (t->attr.cancelpending) { |
| cancel_pended = true; |
| t->attr.cancelstate = PTHREAD_CANCEL_DISABLE; |
| } |
| } |
| |
| if (cancel_pended) { |
| posix_thread_finalize(t, PTHREAD_CANCELED); |
| } |
| } |
| |
| /** |
| * @brief Cancel execution of a thread. |
| * |
| * See IEEE 1003.1 |
| */ |
| int pthread_cancel(pthread_t pthread) |
| { |
| int ret = ESRCH; |
| bool cancel_state = PTHREAD_CANCEL_ENABLE; |
| bool cancel_type = PTHREAD_CANCEL_DEFERRED; |
| struct posix_thread *t = NULL; |
| |
| SYS_SEM_LOCK(&pthread_pool_lock) { |
| t = to_posix_thread(pthread); |
| if (t == NULL) { |
| ret = ESRCH; |
| SYS_SEM_LOCK_BREAK; |
| } |
| |
| if (!__attr_is_initialized(&t->attr)) { |
| /* thread has already terminated */ |
| ret = ESRCH; |
| SYS_SEM_LOCK_BREAK; |
| } |
| |
| ret = 0; |
| t->attr.cancelpending = true; |
| cancel_state = t->attr.cancelstate; |
| cancel_type = t->attr.canceltype; |
| } |
| |
| if (ret == 0 && cancel_state == PTHREAD_CANCEL_ENABLE && |
| cancel_type == PTHREAD_CANCEL_ASYNCHRONOUS) { |
| posix_thread_finalize(t, PTHREAD_CANCELED); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * @brief Set thread scheduling policy and parameters. |
| * |
| * See IEEE 1003.1 |
| */ |
| int pthread_setschedparam(pthread_t pthread, int policy, const struct sched_param *param) |
| { |
| int ret = ESRCH; |
| int new_prio = K_LOWEST_APPLICATION_THREAD_PRIO; |
| struct posix_thread *t = NULL; |
| |
| if (param == NULL || !valid_posix_policy(policy) || |
| !is_posix_policy_prio_valid(param->sched_priority, policy)) { |
| return EINVAL; |
| } |
| |
| SYS_SEM_LOCK(&pthread_pool_lock) { |
| t = to_posix_thread(pthread); |
| if (t == NULL) { |
| ret = ESRCH; |
| SYS_SEM_LOCK_BREAK; |
| } |
| |
| ret = 0; |
| new_prio = posix_to_zephyr_priority(param->sched_priority, policy); |
| } |
| |
| if (ret == 0) { |
| k_thread_priority_set(&t->thread, new_prio); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * @brief Set thread scheduling priority. |
| * |
| * See IEEE 1003.1 |
| */ |
| int pthread_setschedprio(pthread_t thread, int prio) |
| { |
| int ret; |
| int new_prio = K_LOWEST_APPLICATION_THREAD_PRIO; |
| struct posix_thread *t = NULL; |
| int policy = -1; |
| struct sched_param param; |
| |
| ret = pthread_getschedparam(thread, &policy, ¶m); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| if (!is_posix_policy_prio_valid(prio, policy)) { |
| return EINVAL; |
| } |
| |
| ret = ESRCH; |
| SYS_SEM_LOCK(&pthread_pool_lock) { |
| t = to_posix_thread(thread); |
| if (t == NULL) { |
| ret = ESRCH; |
| SYS_SEM_LOCK_BREAK; |
| } |
| |
| ret = 0; |
| new_prio = posix_to_zephyr_priority(prio, policy); |
| } |
| |
| if (ret == 0) { |
| k_thread_priority_set(&t->thread, new_prio); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * @brief Initialise threads attribute object |
| * |
| * See IEEE 1003.1 |
| */ |
| int pthread_attr_init(pthread_attr_t *_attr) |
| { |
| struct posix_thread_attr *const attr = (struct posix_thread_attr *)_attr; |
| |
| if (attr == NULL) { |
| LOG_DBG("Invalid attr pointer"); |
| return ENOMEM; |
| } |
| |
| BUILD_ASSERT(DYNAMIC_STACK_SIZE <= PTHREAD_STACK_MAX); |
| |
| *attr = (struct posix_thread_attr){0}; |
| attr->guardsize = CONFIG_POSIX_PTHREAD_ATTR_GUARDSIZE_DEFAULT; |
| attr->contentionscope = PTHREAD_SCOPE_SYSTEM; |
| attr->inheritsched = PTHREAD_INHERIT_SCHED; |
| |
| if (DYNAMIC_STACK_SIZE > 0) { |
| attr->stack = k_thread_stack_alloc(DYNAMIC_STACK_SIZE + attr->guardsize, |
| k_is_user_context() ? K_USER : 0); |
| if (attr->stack == NULL) { |
| LOG_DBG("Did not auto-allocate thread stack"); |
| } else { |
| __set_attr_stacksize(attr, DYNAMIC_STACK_SIZE); |
| __ASSERT_NO_MSG(__attr_is_initialized(attr)); |
| LOG_DBG("Allocated thread stack %zu@%p", __get_attr_stacksize(attr), |
| attr->stack); |
| } |
| } |
| |
| /* caller responsible for destroying attr */ |
| attr->initialized = true; |
| |
| LOG_DBG("Initialized attr %p", _attr); |
| |
| return 0; |
| } |
| |
| /** |
| * @brief Get thread scheduling policy and parameters |
| * |
| * See IEEE 1003.1 |
| */ |
| int pthread_getschedparam(pthread_t pthread, int *policy, struct sched_param *param) |
| { |
| int ret = ESRCH; |
| struct posix_thread *t; |
| |
| if (policy == NULL || param == NULL) { |
| return EINVAL; |
| } |
| |
| SYS_SEM_LOCK(&pthread_pool_lock) { |
| t = to_posix_thread(pthread); |
| if (t == NULL) { |
| ret = ESRCH; |
| SYS_SEM_LOCK_BREAK; |
| } |
| |
| if (!__attr_is_initialized(&t->attr)) { |
| ret = ESRCH; |
| SYS_SEM_LOCK_BREAK; |
| } |
| |
| ret = 0; |
| param->sched_priority = |
| zephyr_to_posix_priority(k_thread_priority_get(&t->thread), policy); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * @brief Dynamic package initialization |
| * |
| * See IEEE 1003.1 |
| */ |
| int pthread_once(pthread_once_t *once, void (*init_func)(void)) |
| { |
| int ret = EINVAL; |
| bool run_init_func = false; |
| struct pthread_once *const _once = (struct pthread_once *)once; |
| |
| if (init_func == NULL) { |
| return EINVAL; |
| } |
| |
| SYS_SEM_LOCK(&pthread_pool_lock) { |
| if (!_once->flag) { |
| run_init_func = true; |
| _once->flag = true; |
| } |
| ret = 0; |
| } |
| |
| if (ret == 0 && run_init_func) { |
| init_func(); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * @brief Terminate calling thread. |
| * |
| * See IEEE 1003.1 |
| */ |
| FUNC_NORETURN |
| void pthread_exit(void *retval) |
| { |
| struct posix_thread *self = NULL; |
| |
| SYS_SEM_LOCK(&pthread_pool_lock) { |
| self = to_posix_thread(pthread_self()); |
| if (self == NULL) { |
| SYS_SEM_LOCK_BREAK; |
| } |
| |
| /* Mark a thread as cancellable before exiting */ |
| self->attr.cancelstate = PTHREAD_CANCEL_ENABLE; |
| } |
| |
| if (self == NULL) { |
| /* not a valid posix_thread */ |
| LOG_DBG("Aborting non-pthread %p", k_current_get()); |
| k_thread_abort(k_current_get()); |
| |
| CODE_UNREACHABLE; |
| } |
| |
| posix_thread_finalize(self, retval); |
| CODE_UNREACHABLE; |
| } |
| |
| /** |
| * @brief Wait for a thread termination. |
| * |
| * See IEEE 1003.1 |
| */ |
| int pthread_join(pthread_t pthread, void **status) |
| { |
| int ret = ESRCH; |
| struct posix_thread *t = NULL; |
| |
| if (pthread == pthread_self()) { |
| LOG_DBG("Pthread attempted to join itself (%x)", pthread); |
| return EDEADLK; |
| } |
| |
| SYS_SEM_LOCK(&pthread_pool_lock) { |
| t = to_posix_thread(pthread); |
| if (t == NULL) { |
| ret = ESRCH; |
| SYS_SEM_LOCK_BREAK; |
| } |
| |
| LOG_DBG("Pthread %p joining..", &t->thread); |
| |
| if (t->attr.detachstate != PTHREAD_CREATE_JOINABLE) { |
| /* undefined behaviour */ |
| ret = EINVAL; |
| SYS_SEM_LOCK_BREAK; |
| } |
| |
| if (posix_thread_q_get(t) == POSIX_THREAD_READY_Q) { |
| ret = ESRCH; |
| SYS_SEM_LOCK_BREAK; |
| } |
| |
| /* |
| * thread is joinable and is in run_q or done_q. |
| * let's ensure that the thread cannot be joined again after this point. |
| */ |
| ret = 0; |
| t->attr.detachstate = PTHREAD_CREATE_DETACHED; |
| } |
| |
| switch (ret) { |
| case ESRCH: |
| LOG_DBG("Pthread %p has already been joined", &t->thread); |
| return ret; |
| case EINVAL: |
| LOG_DBG("Pthread %p is not a joinable", &t->thread); |
| return ret; |
| case 0: |
| break; |
| } |
| |
| ret = k_thread_join(&t->thread, K_FOREVER); |
| /* other possibilities? */ |
| __ASSERT_NO_MSG(ret == 0); |
| |
| LOG_DBG("Joined pthread %p", &t->thread); |
| |
| if (status != NULL) { |
| LOG_DBG("Writing status to %p", status); |
| *status = t->retval; |
| } |
| |
| posix_thread_recycle(); |
| |
| return 0; |
| } |
| |
| /** |
| * @brief Detach a thread. |
| * |
| * See IEEE 1003.1 |
| */ |
| int pthread_detach(pthread_t pthread) |
| { |
| int ret = ESRCH; |
| struct posix_thread *t = NULL; |
| |
| SYS_SEM_LOCK(&pthread_pool_lock) { |
| t = to_posix_thread(pthread); |
| if (t == NULL) { |
| ret = ESRCH; |
| SYS_SEM_LOCK_BREAK; |
| } |
| |
| if (posix_thread_q_get(t) == POSIX_THREAD_READY_Q || |
| t->attr.detachstate != PTHREAD_CREATE_JOINABLE) { |
| LOG_DBG("Pthread %p cannot be detached", &t->thread); |
| ret = EINVAL; |
| SYS_SEM_LOCK_BREAK; |
| } |
| |
| ret = 0; |
| t->attr.detachstate = PTHREAD_CREATE_DETACHED; |
| } |
| |
| if (ret == 0) { |
| LOG_DBG("Pthread %p detached", &t->thread); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * @brief Get detach state attribute in thread attributes object. |
| * |
| * See IEEE 1003.1 |
| */ |
| int pthread_attr_getdetachstate(const pthread_attr_t *_attr, int *detachstate) |
| { |
| const struct posix_thread_attr *attr = (const struct posix_thread_attr *)_attr; |
| |
| if (!__attr_is_initialized(attr) || (detachstate == NULL)) { |
| return EINVAL; |
| } |
| |
| *detachstate = attr->detachstate; |
| return 0; |
| } |
| |
| /** |
| * @brief Set detach state attribute in thread attributes object. |
| * |
| * See IEEE 1003.1 |
| */ |
| int pthread_attr_setdetachstate(pthread_attr_t *_attr, int detachstate) |
| { |
| struct posix_thread_attr *attr = (struct posix_thread_attr *)_attr; |
| |
| if (!__attr_is_initialized(attr) || ((detachstate != PTHREAD_CREATE_DETACHED) && |
| (detachstate != PTHREAD_CREATE_JOINABLE))) { |
| return EINVAL; |
| } |
| |
| attr->detachstate = detachstate; |
| return 0; |
| } |
| |
| /** |
| * @brief Get scheduling policy attribute in Thread attributes. |
| * |
| * See IEEE 1003.1 |
| */ |
| int pthread_attr_getschedpolicy(const pthread_attr_t *_attr, int *policy) |
| { |
| const struct posix_thread_attr *attr = (const struct posix_thread_attr *)_attr; |
| |
| if (!__attr_is_initialized(attr) || (policy == NULL)) { |
| return EINVAL; |
| } |
| |
| *policy = attr->schedpolicy; |
| return 0; |
| } |
| |
| /** |
| * @brief Set scheduling policy attribute in Thread attributes object. |
| * |
| * See IEEE 1003.1 |
| */ |
| int pthread_attr_setschedpolicy(pthread_attr_t *_attr, int policy) |
| { |
| struct posix_thread_attr *attr = (struct posix_thread_attr *)_attr; |
| |
| if (!__attr_is_initialized(attr) || !valid_posix_policy(policy)) { |
| return EINVAL; |
| } |
| |
| attr->schedpolicy = policy; |
| return 0; |
| } |
| |
| /** |
| * @brief Get stack size attribute in thread attributes object. |
| * |
| * See IEEE 1003.1 |
| */ |
| int pthread_attr_getstacksize(const pthread_attr_t *_attr, size_t *stacksize) |
| { |
| const struct posix_thread_attr *attr = (const struct posix_thread_attr *)_attr; |
| |
| if (!__attr_is_initialized(attr) || (stacksize == NULL)) { |
| return EINVAL; |
| } |
| |
| *stacksize = __get_attr_stacksize(attr); |
| return 0; |
| } |
| |
| /** |
| * @brief Set stack size attribute in thread attributes object. |
| * |
| * See IEEE 1003.1 |
| */ |
| int pthread_attr_setstacksize(pthread_attr_t *_attr, size_t stacksize) |
| { |
| int ret; |
| void *new_stack; |
| struct posix_thread_attr *attr = (struct posix_thread_attr *)_attr; |
| |
| if (!__attr_is_initialized(attr) || stacksize == 0 || stacksize < PTHREAD_STACK_MIN || |
| stacksize > PTHREAD_STACK_MAX) { |
| return EINVAL; |
| } |
| |
| if (__get_attr_stacksize(attr) == stacksize) { |
| return 0; |
| } |
| |
| new_stack = |
| k_thread_stack_alloc(stacksize + attr->guardsize, k_is_user_context() ? K_USER : 0); |
| if (new_stack == NULL) { |
| if (stacksize < __get_attr_stacksize(attr)) { |
| __set_attr_stacksize(attr, stacksize); |
| return 0; |
| } |
| |
| LOG_DBG("k_thread_stack_alloc(%zu) failed", |
| __get_attr_stacksize(attr) + attr->guardsize); |
| return ENOMEM; |
| } |
| LOG_DBG("Allocated thread stack %zu@%p", stacksize + attr->guardsize, new_stack); |
| |
| if (attr->stack != NULL) { |
| ret = k_thread_stack_free(attr->stack); |
| if (ret == 0) { |
| LOG_DBG("Freed attr %p thread stack %zu@%p", _attr, |
| __get_attr_stacksize(attr), attr->stack); |
| } |
| } |
| |
| __set_attr_stacksize(attr, stacksize); |
| attr->stack = new_stack; |
| |
| return 0; |
| } |
| |
| /** |
| * @brief Get stack attributes in thread attributes object. |
| * |
| * See IEEE 1003.1 |
| */ |
| int pthread_attr_getstack(const pthread_attr_t *_attr, void **stackaddr, size_t *stacksize) |
| { |
| const struct posix_thread_attr *attr = (const struct posix_thread_attr *)_attr; |
| |
| if (!__attr_is_initialized(attr) || (stackaddr == NULL) || (stacksize == NULL)) { |
| return EINVAL; |
| } |
| |
| *stackaddr = attr->stack; |
| *stacksize = __get_attr_stacksize(attr); |
| return 0; |
| } |
| |
| int pthread_attr_getguardsize(const pthread_attr_t *ZRESTRICT _attr, size_t *ZRESTRICT guardsize) |
| { |
| struct posix_thread_attr *const attr = (struct posix_thread_attr *)_attr; |
| |
| if (!__attr_is_initialized(attr) || guardsize == NULL) { |
| return EINVAL; |
| } |
| |
| *guardsize = attr->guardsize; |
| |
| return 0; |
| } |
| |
| int pthread_attr_setguardsize(pthread_attr_t *_attr, size_t guardsize) |
| { |
| struct posix_thread_attr *const attr = (struct posix_thread_attr *)_attr; |
| |
| if (!__attr_is_initialized(attr) || guardsize > PTHREAD_GUARD_MAX) { |
| return EINVAL; |
| } |
| |
| attr->guardsize = guardsize; |
| |
| return 0; |
| } |
| |
| /** |
| * @brief Get thread attributes object scheduling parameters. |
| * |
| * See IEEE 1003.1 |
| */ |
| int pthread_attr_getschedparam(const pthread_attr_t *_attr, struct sched_param *schedparam) |
| { |
| struct posix_thread_attr *attr = (struct posix_thread_attr *)_attr; |
| |
| if (!__attr_is_initialized(attr) || (schedparam == NULL)) { |
| return EINVAL; |
| } |
| |
| schedparam->sched_priority = attr->priority; |
| return 0; |
| } |
| |
| /** |
| * @brief Destroy thread attributes object. |
| * |
| * See IEEE 1003.1 |
| */ |
| int pthread_attr_destroy(pthread_attr_t *_attr) |
| { |
| int ret; |
| struct posix_thread_attr *attr = (struct posix_thread_attr *)_attr; |
| |
| if (!__attr_is_initialized(attr)) { |
| return EINVAL; |
| } |
| |
| ret = k_thread_stack_free(attr->stack); |
| if (ret == 0) { |
| LOG_DBG("Freed attr %p thread stack %zu@%p", _attr, __get_attr_stacksize(attr), |
| attr->stack); |
| } |
| |
| *attr = (struct posix_thread_attr){0}; |
| LOG_DBG("Destroyed attr %p", _attr); |
| |
| return 0; |
| } |
| |
| int pthread_setname_np(pthread_t thread, const char *name) |
| { |
| #ifdef CONFIG_THREAD_NAME |
| k_tid_t kthread; |
| |
| thread = get_posix_thread_idx(thread); |
| if (thread >= ARRAY_SIZE(posix_thread_pool)) { |
| return ESRCH; |
| } |
| |
| kthread = &posix_thread_pool[thread].thread; |
| |
| if (name == NULL) { |
| return EINVAL; |
| } |
| |
| return k_thread_name_set(kthread, name); |
| #else |
| ARG_UNUSED(thread); |
| ARG_UNUSED(name); |
| return 0; |
| #endif |
| } |
| |
| int pthread_getname_np(pthread_t thread, char *name, size_t len) |
| { |
| #ifdef CONFIG_THREAD_NAME |
| k_tid_t kthread; |
| |
| thread = get_posix_thread_idx(thread); |
| if (thread >= ARRAY_SIZE(posix_thread_pool)) { |
| return ESRCH; |
| } |
| |
| if (name == NULL) { |
| return EINVAL; |
| } |
| |
| memset(name, '\0', len); |
| kthread = &posix_thread_pool[thread].thread; |
| return k_thread_name_copy(kthread, name, len - 1); |
| #else |
| ARG_UNUSED(thread); |
| ARG_UNUSED(name); |
| ARG_UNUSED(len); |
| return 0; |
| #endif |
| } |
| |
| int pthread_atfork(void (*prepare)(void), void (*parent)(void), void (*child)(void)) |
| { |
| ARG_UNUSED(prepare); |
| ARG_UNUSED(parent); |
| ARG_UNUSED(child); |
| |
| return ENOSYS; |
| } |
| |
| /* this should probably go into signal.c but we need access to the lock */ |
| int pthread_sigmask(int how, const sigset_t *ZRESTRICT set, sigset_t *ZRESTRICT oset) |
| { |
| int ret = ESRCH; |
| struct posix_thread *t = NULL; |
| |
| if (!(how == SIG_BLOCK || how == SIG_SETMASK || how == SIG_UNBLOCK)) { |
| return EINVAL; |
| } |
| |
| SYS_SEM_LOCK(&pthread_pool_lock) { |
| t = to_posix_thread(pthread_self()); |
| if (t == NULL) { |
| ret = ESRCH; |
| SYS_SEM_LOCK_BREAK; |
| } |
| |
| if (oset != NULL) { |
| *oset = t->sigset; |
| } |
| |
| ret = 0; |
| if (set == NULL) { |
| SYS_SEM_LOCK_BREAK; |
| } |
| |
| switch (how) { |
| case SIG_BLOCK: |
| for (size_t i = 0; i < ARRAY_SIZE(set->sig); ++i) { |
| t->sigset.sig[i] |= set->sig[i]; |
| } |
| break; |
| case SIG_SETMASK: |
| t->sigset = *set; |
| break; |
| case SIG_UNBLOCK: |
| for (size_t i = 0; i < ARRAY_SIZE(set->sig); ++i) { |
| t->sigset.sig[i] &= ~set->sig[i]; |
| } |
| break; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int posix_thread_pool_init(void) |
| { |
| ARRAY_FOR_EACH_PTR(posix_thread_pool, th) { |
| posix_thread_q_set(th, POSIX_THREAD_READY_Q); |
| } |
| |
| return 0; |
| } |
| SYS_INIT(posix_thread_pool_init, PRE_KERNEL_1, 0); |