| .. _cy8cproto_062_4343w: |
| |
| INFINEON CY8CPROTO-062-4343W |
| ############################ |
| |
| Overview |
| ******** |
| |
| The CY8CPROTO-062-4343W PSoC 6 Wi-Fi BT Prototyping Kit is a low-cost hardware |
| platform that enables design and debug of PSoC 6 MCUs. It comes with a Murata |
| LBEE5KL1DX module, based on the CYW4343W combo device, industry-leading CAPSENSE |
| for touch buttons and slider, on-board debugger/programmer with KitProg3, microSD |
| card interface, 512-Mb Quad-SPI NOR flash, PDM-PCM microphone, and a thermistor. |
| |
| This kit is designed with a snap-away form-factor, allowing the user to separate |
| the different components and features that come with this kit and use independently. |
| In addition, support for Digilent's Pmod interface is also provided with this kit. |
| |
| .. image:: img/board.jpg |
| :align: center |
| :alt: CY8CPROTO-062-4343W |
| |
| Hardware |
| ******** |
| |
| For more information about the PSoC 62 MCU SoC and CY8CPROTO-062-4343W board: |
| |
| - `PSoC 62 MCU SoC Website`_ |
| - `PSoC 62 MCU Datasheet`_ |
| - `PSoC 62 MCU Architecture Reference Manual`_ |
| - `PSoC 62 MCU Register Reference Manual`_ |
| - `CY8CPROTO-062-4343W PSoC 6 Wi-Fi BT Website`_ |
| - `CY8CPROTO-062-4343W PSoC 6 Wi-Fi BT User Guide`_ |
| - `CY8CPROTO-062-4343W PSoC 6 Wi-Fi BT Schematics`_ |
| |
| Kit Features: |
| ============= |
| |
| - Support of up to 2MB Flash and 1MB SRAM |
| - Dedicated SDHC to interface with WICED wireless devices. |
| - Delivers dual-cores, with a 150-MHz Arm Cortex-M4 as the primary |
| application processor and a 100-MHz Arm Cortex-M0+ as the secondary |
| processor for low-power operations. |
| - Supports Full-Speed USB, capacitive-sensing with CAPSENSE, a PDM-PCM |
| digital microphone interface, a Quad-SPI interface, 13 serial communication |
| blocks, 7 programmable analog blocks, and 56 programmable digital blocks. |
| |
| Kit Contents: |
| ============= |
| |
| - PSoC 6 Wi-Fi BT Prototyping Board |
| - USB Type-A to Micro-B cable |
| - Quick Start Guide |
| |
| Supported Features |
| ================== |
| |
| The board configuration supports the following hardware features: |
| |
| +-----------+------------+-----------------------+ |
| | Interface | Controller | Driver/Component | |
| +===========+============+=======================+ |
| | NVIC | on-chip | nested vectored | |
| | | | interrupt controller | |
| +-----------+------------+-----------------------+ |
| | SYSTICK | on-chip | system clock | |
| +-----------+------------+-----------------------+ |
| | GPIO | on-chip | GPIO | |
| +-----------+------------+-----------------------+ |
| | UART | on-chip | serial port-polling; | |
| | | | serial port-interrupt | |
| +-----------+------------+-----------------------+ |
| |
| |
| The default configuration can be found in the Kconfig |
| |
| :zephyr_file:`boards/cypress/cy8cproto_062_4343w/cy8cproto_062_4343w_defconfig` |
| |
| |
| System Clock |
| ============ |
| |
| The PSoC 62 MCU SoC is configured to use the internal IMO+FLL as a source for |
| the system clock. CM0+ works at 50MHz, CM4 - at 100MHz. Other sources for the |
| system clock are provided in the SOC, depending on your system requirements. |
| |
| |
| Fetch Binary Blobs |
| ****************** |
| |
| cy8cproto_062_4343w board optionally uses binary blobs for features |
| (e.g WIFI/Bluetooth chip firmware, CM0p prebuilt images, etc). |
| |
| To fetch Binary Blobs: |
| |
| .. code-block:: console |
| |
| west blobs fetch hal_infineon |
| |
| |
| Build blinking led sample |
| ************************* |
| |
| Here is an example for the :zephyr:code-sample:`blinky` application. |
| |
| .. code-block:: console |
| |
| cd zephyr |
| west build -p auto -b cy8cproto_062_4343w samples/basic/blink |
| |
| OpenOCD Installation |
| ==================== |
| |
| To get the OpenOCD package, it is required that you |
| |
| 1. Download the software ModusToolbox 3.1. https://softwaretools.infineon.com/tools/com.ifx.tb.tool.modustoolbox |
| 2. Once downloaded add the path to access the Scripts folder provided by ModusToolbox |
| export PATH=$PATH:/path/to/ModusToolbox/tools_3.1/openocd/scripts |
| 3. Add the OpenOCD executable file's path to west flash/debug. |
| 4. Flash using: west flash --openocd path/to/infineon/openocd/bin/openocd |
| 5. Debug using: west debug --openocd path/to/infineon/openocd/bin/openocd |
| |
| |
| Programming and Debugging |
| ************************* |
| |
| The CY8CPROTO-062-4343W includes an onboard programmer/debugger (KitProg2) with |
| mass storage programming to provide debugging, flash programming, and serial |
| communication over USB. Flash and debug commands must be pointed to the Cypress |
| OpenOCD you downloaded above. |
| |
| On Windows: |
| |
| .. code-block:: console |
| |
| west flash --openocd path/to/infineon/openocd/bin/openocd.exe |
| west debug --openocd path/to/infineon/openocd/bin/openocd.exe |
| |
| On Linux: |
| |
| .. code-block:: console |
| |
| west flash --openocd path/to/infineon/openocd/bin/openocd |
| west debug --openocd path/to/infineon/openocd/bin/openocd |
| |
| Once the gdb console starts after executing the west debug command, you may |
| now set breakpoints and perform other standard GDB debugging on the PSoC 6 CM4 core. |
| |
| Errata |
| ====== |
| |
| +------------------------------------------------+----------------------------------------+ |
| | Problem | Solution | |
| +================================================+========================================+ |
| | The GPIO_INT_TRIG_BOTH interrupt is not raised | This will be fixed in a future release.| |
| | when the associated GPIO is asserted. | | |
| +------------------------------------------------+----------------------------------------+ |
| | GDB experiences a timeout error connecting to | This will be fixed in a future release.| |
| | a server instance started by west debugserver. | | |
| +------------------------------------------------+----------------------------------------+ |
| |
| .. _PSoC 62 MCU SoC Website: |
| https://www.cypress.com/products/32-bit-arm-cortex-m4-psoc-6 |
| |
| .. _PSoC 62 MCU Datasheet: |
| https://www.cypress.com/documentation/datasheets/psoc-6-mcu-psoc-62-datasheet-programmable-system-chip-psoc-preliminary |
| |
| .. _PSoC 62 MCU Architecture Reference Manual: |
| https://www.cypress.com/documentation/technical-reference-manuals/psoc-6-mcu-psoc-62-architecture-technical-reference-manual |
| |
| .. _PSoC 62 MCU Register Reference Manual: |
| https://www.cypress.com/documentation/technical-reference-manuals/psoc-6-mcu-psoc-62-register-technical-reference-manual-trm |
| |
| .. _CY8CPROTO-062-4343W PSoC 6 Wi-Fi BT Website: |
| https://www.infineon.com/cms/en/product/evaluation-boards/cy8cproto-062-4343w/ |
| |
| .. _CY8CPROTO-062-4343W PSoC 6 Wi-Fi BT User Guide: |
| https://www.infineon.com/cms/en/product/evaluation-boards/cy8cproto-062-4343w/#!?fileId=8ac78c8c7d0d8da4017d0f0118571844 |
| |
| .. _CY8CPROTO-062-4343W PSoC 6 Wi-Fi BT Schematics: |
| https://www.infineon.com/cms/en/product/evaluation-boards/cy8cproto-062-4343w/#!?fileId=8ac78c8c7d0d8da4017d0f01126b183f |
| |
| .. _Infineon OpenOCD: |
| https://github.com/infineon/openocd/releases/tag/release-v4.3.0 |