| # Copyright (c) 2020 Stephanos Ioannidis <root@stephanos.io> |
| # Copyright (c) 2020-2021 Gerson Fernando Budke <nandojve@gmail.com> |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| include: |
| - name: ethernet-controller.yaml |
| - name: pinctrl-device.yaml |
| |
| properties: |
| reg: |
| required: true |
| |
| phy-handle: |
| required: true |
| |
| num-queues: |
| type: int |
| required: true |
| description: | |
| Number of hardware TX and RX queues. |
| |
| max-frame-size: |
| type: int |
| default: 1518 |
| description: | |
| Maximum ethernet frame size. The current ethernet frame sizes |
| supported by hardware are 1518, 1536 and 10240 (jumbo frames). This |
| means that normally gmac will reject any frame above max-frame-size |
| value. The default value is 1518, which represents an usual |
| IEEE 802.3 ethernet frame: |
| |
| Ethernet Frame [ 14 MAC HEADER | 1500 MTU | 4 FCS ] = 1518 bytes |
| |
| When using value 1536 it is possible extend ethernet MAC HEADER up |
| to 32 bytes. The hardware have support to jumbo frames and it can be |
| enabled by selecting the value 10240. |
| |
| max-speed: |
| type: int |
| default: 100 |
| description: | |
| This specifies maximum speed in Mbit/s supported by the device. The |
| gmac driver supports 10Mbit/s and 100Mbit/s. Using 100, as default |
| value, enables driver to configure 10 and 100Mbit/s speeds. |
| |
| mac-eeprom: |
| type: phandle |
| description: phandle to I2C eeprom device node. |
| |
| phy-connection-type: |
| default: "rmii" |
