| .. zephyr:code-sample:: timeaware-gpio |
| :name: Time-aware GPIO |
| :relevant-api: tgpio_interface |
| |
| Synchronize clocks. |
| |
| Overview |
| ******** |
| |
| A sample application that can be used with any supported boards. eg. RPL. |
| prints configuration info to the console. Below functionalities are tested: |
| |
| 1. Periodic pulse generation (an Oscilloscope or loopback may be required) |
| 2. Input pulse timestamping (a pulse generator or loopback may be required) |
| |
| Building and Running |
| ******************** |
| |
| This application can be built and executed as follows: |
| |
| .. zephyr-app-commands:: |
| :zephyr-app: samples/drivers/misc/timeaware_gpio |
| :board: intel_rpl_crb |
| :host-os: unix |
| :goals: build |
| |
| |
| To build for another supported board, change "intel_rpl_crb" to that board's |
| name (if supported). |
| |
| Sample Output |
| ============= |
| |
| .. code-block:: console |
| |
| *** Booting Zephyr OS build zephyr-v3.4.0-4166-g52b34a310c67 *** |
| [TGPIO] Bind Success |
| [TGPIO] Time now: 00000001477ed72f |
| [TGPIO] Running rate: 19200000 |
| [TGPIO] Periodic pulses start at: 0000000148a3cf2f |
| [TGPIO] timestamp: 0000000000000000, event count: 0000000000000000 |
| [TGPIO] timestamp: 0000000148a3cf31, event count: 0000000000000001 |
| [TGPIO] timestamp: 0000000149c8c731, event count: 0000000000000002 |
| [TGPIO] timestamp: 000000014aedbf31, event count: 0000000000000003 |
| [TGPIO] timestamp: 000000014c12b731, event count: 0000000000000004 |
| [TGPIO] timestamp: 000000014d37af31, event count: 0000000000000005 |
| [TGPIO] timestamp: 000000014e5ca731, event count: 0000000000000006 |
| [TGPIO] timestamp: 000000014f819f31, event count: 0000000000000007 |
| [TGPIO] timestamp: 0000000150a69731, event count: 0000000000000008 |
| [TGPIO] timestamp: 0000000151cb8f31, event count: 0000000000000009 |
| [TGPIO] timestamp: 0000000152f08731, event count: 000000000000000a |
| [TGPIO] timestamp: 0000000154157f31, event count: 000000000000000b |