| /* |
| * Copyright (c) 2010-2016 Wind River Systems, Inc. |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /** |
| * @file |
| * |
| * @brief Kernel semaphore object. |
| * |
| * The semaphores are of the 'counting' type, i.e. each 'give' operation will |
| * increment the internal count by 1, if no thread is pending on it. The 'init' |
| * call initializes the count to 'initial_count'. Following multiple 'give' |
| * operations, the same number of 'take' operations can be performed without |
| * the calling thread having to pend on the semaphore, or the calling task |
| * having to poll. |
| */ |
| |
| #include <zephyr/kernel.h> |
| #include <zephyr/kernel_structs.h> |
| |
| #include <zephyr/toolchain.h> |
| #include <zephyr/wait_q.h> |
| #include <zephyr/sys/dlist.h> |
| #include <ksched.h> |
| #include <zephyr/init.h> |
| #include <zephyr/syscall_handler.h> |
| #include <zephyr/tracing/tracing.h> |
| #include <zephyr/sys/check.h> |
| |
| /* We use a system-wide lock to synchronize semaphores, which has |
| * unfortunate performance impact vs. using a per-object lock |
| * (semaphores are *very* widely used). But per-object locks require |
| * significant extra RAM. A properly spin-aware semaphore |
| * implementation would spin on atomic access to the count variable, |
| * and not a spinlock per se. Useful optimization for the future... |
| */ |
| static struct k_spinlock lock; |
| |
| int z_impl_k_sem_init(struct k_sem *sem, unsigned int initial_count, |
| unsigned int limit) |
| { |
| /* |
| * Limit cannot be zero and count cannot be greater than limit |
| */ |
| CHECKIF(limit == 0U || limit > K_SEM_MAX_LIMIT || initial_count > limit) { |
| SYS_PORT_TRACING_OBJ_FUNC(k_sem, init, sem, -EINVAL); |
| |
| return -EINVAL; |
| } |
| |
| sem->count = initial_count; |
| sem->limit = limit; |
| |
| SYS_PORT_TRACING_OBJ_FUNC(k_sem, init, sem, 0); |
| |
| z_waitq_init(&sem->wait_q); |
| #if defined(CONFIG_POLL) |
| sys_dlist_init(&sem->poll_events); |
| #endif |
| z_object_init(sem); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_USERSPACE |
| int z_vrfy_k_sem_init(struct k_sem *sem, unsigned int initial_count, |
| unsigned int limit) |
| { |
| Z_OOPS(Z_SYSCALL_OBJ_INIT(sem, K_OBJ_SEM)); |
| return z_impl_k_sem_init(sem, initial_count, limit); |
| } |
| #include <syscalls/k_sem_init_mrsh.c> |
| #endif |
| |
| static inline void handle_poll_events(struct k_sem *sem) |
| { |
| #ifdef CONFIG_POLL |
| z_handle_obj_poll_events(&sem->poll_events, K_POLL_STATE_SEM_AVAILABLE); |
| #else |
| ARG_UNUSED(sem); |
| #endif |
| } |
| |
| void z_impl_k_sem_give(struct k_sem *sem) |
| { |
| k_spinlock_key_t key = k_spin_lock(&lock); |
| struct k_thread *thread; |
| |
| SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_sem, give, sem); |
| |
| thread = z_unpend_first_thread(&sem->wait_q); |
| |
| if (thread != NULL) { |
| arch_thread_return_value_set(thread, 0); |
| z_ready_thread(thread); |
| } else { |
| sem->count += (sem->count != sem->limit) ? 1U : 0U; |
| handle_poll_events(sem); |
| } |
| |
| z_reschedule(&lock, key); |
| |
| SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_sem, give, sem); |
| } |
| |
| #ifdef CONFIG_USERSPACE |
| static inline void z_vrfy_k_sem_give(struct k_sem *sem) |
| { |
| Z_OOPS(Z_SYSCALL_OBJ(sem, K_OBJ_SEM)); |
| z_impl_k_sem_give(sem); |
| } |
| #include <syscalls/k_sem_give_mrsh.c> |
| #endif |
| |
| int z_impl_k_sem_take(struct k_sem *sem, k_timeout_t timeout) |
| { |
| int ret = 0; |
| |
| __ASSERT(((arch_is_in_isr() == false) || |
| K_TIMEOUT_EQ(timeout, K_NO_WAIT)), ""); |
| |
| k_spinlock_key_t key = k_spin_lock(&lock); |
| |
| SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_sem, take, sem, timeout); |
| |
| if (likely(sem->count > 0U)) { |
| sem->count--; |
| k_spin_unlock(&lock, key); |
| ret = 0; |
| goto out; |
| } |
| |
| if (K_TIMEOUT_EQ(timeout, K_NO_WAIT)) { |
| k_spin_unlock(&lock, key); |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| SYS_PORT_TRACING_OBJ_FUNC_BLOCKING(k_sem, take, sem, timeout); |
| |
| ret = z_pend_curr(&lock, key, &sem->wait_q, timeout); |
| |
| out: |
| SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_sem, take, sem, timeout, ret); |
| |
| return ret; |
| } |
| |
| void z_impl_k_sem_reset(struct k_sem *sem) |
| { |
| struct k_thread *thread; |
| k_spinlock_key_t key = k_spin_lock(&lock); |
| |
| while (true) { |
| thread = z_unpend_first_thread(&sem->wait_q); |
| if (thread == NULL) { |
| break; |
| } |
| arch_thread_return_value_set(thread, -EAGAIN); |
| z_ready_thread(thread); |
| } |
| sem->count = 0; |
| |
| SYS_PORT_TRACING_OBJ_FUNC(k_sem, reset, sem); |
| |
| handle_poll_events(sem); |
| |
| z_reschedule(&lock, key); |
| } |
| |
| #ifdef CONFIG_USERSPACE |
| static inline int z_vrfy_k_sem_take(struct k_sem *sem, k_timeout_t timeout) |
| { |
| Z_OOPS(Z_SYSCALL_OBJ(sem, K_OBJ_SEM)); |
| return z_impl_k_sem_take((struct k_sem *)sem, timeout); |
| } |
| #include <syscalls/k_sem_take_mrsh.c> |
| |
| static inline void z_vrfy_k_sem_reset(struct k_sem *sem) |
| { |
| Z_OOPS(Z_SYSCALL_OBJ(sem, K_OBJ_SEM)); |
| z_impl_k_sem_reset(sem); |
| } |
| #include <syscalls/k_sem_reset_mrsh.c> |
| |
| static inline unsigned int z_vrfy_k_sem_count_get(struct k_sem *sem) |
| { |
| Z_OOPS(Z_SYSCALL_OBJ(sem, K_OBJ_SEM)); |
| return z_impl_k_sem_count_get(sem); |
| } |
| #include <syscalls/k_sem_count_get_mrsh.c> |
| |
| #endif |