blob: f147cde77189ae144acba1f27226335cd8ec0ca3 [file] [log] [blame]
/**
* @file
* @brief SPI Devicetree macro public API header file.
*/
/*
* Copyright (c) 2020 Nordic Semiconductor
*
* SPDX-License-Identifier: Apache-2.0
*/
#ifndef ZEPHYR_INCLUDE_DEVICETREE_SPI_H_
#define ZEPHYR_INCLUDE_DEVICETREE_SPI_H_
#ifdef __cplusplus
extern "C" {
#endif
/**
* @defgroup devicetree-spi Devicetree SPI API
* @ingroup devicetree
* @{
*/
/**
* @brief Does a SPI controller node have chip select GPIOs configured?
*
* SPI bus controllers use the "cs-gpios" property for configuring
* chip select GPIOs. Its value is a phandle-array which specifies the
* chip select lines.
*
* Example devicetree fragment:
*
* spi1: spi@... {
* compatible = "vnd,spi";
* cs-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>,
* <&gpio2 20 GPIO_ACTIVE_LOW>;
* };
*
* spi2: spi@... {
* compatible = "vnd,spi";
* };
*
* Example usage:
*
* DT_SPI_HAS_CS_GPIOS(DT_NODELABEL(spi1)) // 1
* DT_SPI_HAS_CS_GPIOS(DT_NODELABEL(spi2)) // 0
*
* @param spi a SPI bus controller node identifier
* @return 1 if "spi" has a cs-gpios property, 0 otherwise
*/
#define DT_SPI_HAS_CS_GPIOS(spi) DT_NODE_HAS_PROP(spi, cs_gpios)
/**
* @brief Number of chip select GPIOs in a SPI controller's cs-gpios property
*
* Example devicetree fragment:
*
* spi1: spi@... {
* compatible = "vnd,spi";
* cs-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>,
* <&gpio2 20 GPIO_ACTIVE_LOW>;
* };
*
* spi2: spi@... {
* compatible = "vnd,spi";
* };
*
* Example usage:
*
* DT_SPI_NUM_CS_GPIOS(DT_NODELABEL(spi1)) // 2
* DT_SPI_NUM_CS_GPIOS(DT_NODELABEL(spi2)) // 0
*
* @param spi a SPI bus controller node identifier
* @return Logical length of spi's cs-gpios property, or 0 if "spi" doesn't
* have a cs-gpios property
*/
#define DT_SPI_NUM_CS_GPIOS(spi) \
COND_CODE_1(DT_SPI_HAS_CS_GPIOS(spi), \
(DT_PROP_LEN(spi, cs_gpios)), (0))
/**
* @brief Does a SPI device have a chip select line configured?
* Example devicetree fragment:
*
* spi1: spi@... {
* compatible = "vnd,spi";
* cs-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>,
* <&gpio2 20 GPIO_ACTIVE_LOW>;
*
* a: spi-dev-a@0 {
* reg = <0>;
* };
*
* b: spi-dev-b@1 {
* reg = <1>;
* };
* };
*
* spi2: spi@... {
* compatible = "vnd,spi";
* c: spi-dev-c@0 {
* reg = <0>;
* };
* };
*
* Example usage:
*
* DT_SPI_DEV_HAS_CS_GPIOS(DT_NODELABEL(a)) // 1
* DT_SPI_DEV_HAS_CS_GPIOS(DT_NODELABEL(b)) // 1
* DT_SPI_DEV_HAS_CS_GPIOS(DT_NODELABEL(c)) // 0
*
* @param spi_dev a SPI device node identifier
* @return 1 if spi_dev's bus node DT_BUS(spi_dev) has a chip select
* pin at index DT_REG_ADDR(spi_dev), 0 otherwise
*/
#define DT_SPI_DEV_HAS_CS_GPIOS(spi_dev) DT_SPI_HAS_CS_GPIOS(DT_BUS(spi_dev))
/**
* @brief Get a SPI device's chip select GPIO controller's node identifier
*
* Example devicetree fragment:
*
* gpio1: gpio@... { ... };
*
* gpio2: gpio@... { ... };
*
* spi@... {
* compatible = "vnd,spi";
* cs-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>,
* <&gpio2 20 GPIO_ACTIVE_LOW>;
*
* a: spi-dev-a@0 {
* reg = <0>;
* };
*
* b: spi-dev-b@1 {
* reg = <1>;
* };
* };
*
* Example usage:
*
* DT_SPI_DEV_CS_GPIOS_CTLR(DT_NODELABEL(a)) // DT_NODELABEL(gpio1)
* DT_SPI_DEV_CS_GPIOS_CTLR(DT_NODELABEL(b)) // DT_NODELABEL(gpio2)
*
* @param spi_dev a SPI device node identifier
* @return node identifier for spi_dev's chip select GPIO controller
*/
#define DT_SPI_DEV_CS_GPIOS_CTLR(spi_dev) \
DT_GPIO_CTLR_BY_IDX(DT_BUS(spi_dev), cs_gpios, DT_REG_ADDR(spi_dev))
/**
* @brief Get a SPI device's chip select GPIO controller's label property
*
* Example devicetree fragment:
*
* gpio1: gpio@... {
* label = "GPIO_1";
* };
*
* gpio2: gpio@... {
* label = "GPIO_2";
* };
*
* spi1: spi@... {
* compatible = "vnd,spi";
* cs-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>,
* <&gpio2 20 GPIO_ACTIVE_LOW>;
*
* a: spi-dev-a@0 {
* reg = <0>;
* };
*
* b: spi-dev-b@1 {
* reg = <1>;
* };
* };
*
* Example usage:
*
* DT_SPI_DEV_CS_GPIOS_LABEL(DT_NODELABEL(a)) // "GPIO_1"
* DT_SPI_DEV_CS_GPIOS_LABEL(DT_NODELABEL(b)) // "GPIO_2"
*
* @param spi_dev a SPI device node identifier
* @return label property of spi_dev's chip select GPIO controller
*/
#define DT_SPI_DEV_CS_GPIOS_LABEL(spi_dev) \
DT_GPIO_LABEL_BY_IDX(DT_BUS(spi_dev), cs_gpios, DT_REG_ADDR(spi_dev))
/**
* @brief Get a SPI device's chip select GPIO pin number
*
* It's an error if the GPIO specifier for spi_dev's entry in its
* bus node's cs-gpios property has no pin cell.
*
* Example devicetree fragment:
*
* spi1: spi@... {
* compatible = "vnd,spi";
* cs-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>,
* <&gpio2 20 GPIO_ACTIVE_LOW>;
*
* a: spi-dev-a@0 {
* reg = <0>;
* };
*
* b: spi-dev-b@1 {
* reg = <1>;
* };
* };
*
* Example usage:
*
* DT_SPI_DEV_CS_GPIOS_PIN(DT_NODELABEL(a)) // 10
* DT_SPI_DEV_CS_GPIOS_PIN(DT_NODELABEL(b)) // 20
*
* @param spi_dev a SPI device node identifier
* @return pin number of spi_dev's chip select GPIO
*/
#define DT_SPI_DEV_CS_GPIOS_PIN(spi_dev) \
DT_GPIO_PIN_BY_IDX(DT_BUS(spi_dev), cs_gpios, DT_REG_ADDR(spi_dev))
/**
* @brief Get a SPI device's chip select GPIO flags
*
* Example devicetree fragment:
*
* spi1: spi@... {
* compatible = "vnd,spi";
* cs-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
*
* a: spi-dev-a@0 {
* reg = <0>;
* };
* };
*
* Example usage:
*
* DT_SPI_DEV_CS_GPIOS_FLAGS(DT_NODELABEL(a)) // GPIO_ACTIVE_LOW
*
* If the GPIO specifier for spi_dev's entry in its bus node's
* cs-gpios property has no flags cell, this expands to zero.
*
* @param spi_dev a SPI device node identifier
* @return flags value of spi_dev's chip select GPIO specifier, or
* zero if there is none
*/
#define DT_SPI_DEV_CS_GPIOS_FLAGS(spi_dev) \
DT_GPIO_FLAGS_BY_IDX(DT_BUS(spi_dev), cs_gpios, DT_REG_ADDR(spi_dev))
/**
* @brief Equivalent to DT_SPI_DEV_HAS_CS_GPIOS(DT_DRV_INST(inst)).
* @param inst DT_DRV_COMPAT instance number
* @return 1 if the instance's bus has a CS pin at index
* DT_INST_REG_ADDR(inst), 0 otherwise
* @see DT_SPI_DEV_HAS_CS_GPIOS()
*/
#define DT_INST_SPI_DEV_HAS_CS_GPIOS(inst) \
DT_SPI_DEV_HAS_CS_GPIOS(DT_DRV_INST(inst))
/**
* @brief Get GPIO controller node identifier for a SPI device instance
* This is equivalent to DT_SPI_DEV_CS_GPIOS_CTLR(DT_DRV_INST(inst)).
* @param inst DT_DRV_COMPAT instance number
* @return node identifier for instance's chip select GPIO controller
* @see DT_SPI_DEV_CS_GPIOS_CTLR()
*/
#define DT_INST_SPI_DEV_CS_GPIOS_CTLR(inst) \
DT_SPI_DEV_CS_GPIOS_CTLR(DT_DRV_INST(inst))
/**
* @brief Get GPIO controller name for a SPI device instance
* This is equivalent to DT_SPI_DEV_CS_GPIOS_LABEL(DT_DRV_INST(inst)).
* @param inst DT_DRV_COMPAT instance number
* @return label property of the instance's chip select GPIO controller
* @see DT_SPI_DEV_CS_GPIOS_LABEL()
*/
#define DT_INST_SPI_DEV_CS_GPIOS_LABEL(inst) \
DT_SPI_DEV_CS_GPIOS_LABEL(DT_DRV_INST(inst))
/**
* @brief Equivalent to DT_SPI_DEV_CS_GPIOS_PIN(DT_DRV_INST(inst)).
* @param inst DT_DRV_COMPAT instance number
* @return pin number of the instance's chip select GPIO
* @see DT_SPI_DEV_CS_GPIOS_PIN()
*/
#define DT_INST_SPI_DEV_CS_GPIOS_PIN(inst) \
DT_SPI_DEV_CS_GPIOS_PIN(DT_DRV_INST(inst))
/**
* @brief DT_SPI_DEV_CS_GPIOS_FLAGS(DT_DRV_INST(inst)).
* @param inst DT_DRV_COMPAT instance number
* @return flags value of the instance's chip select GPIO specifier,
* or zero if there is none
* @see DT_SPI_DEV_CS_GPIOS_FLAGS()
*/
#define DT_INST_SPI_DEV_CS_GPIOS_FLAGS(inst) \
DT_SPI_DEV_CS_GPIOS_FLAGS(DT_DRV_INST(inst))
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* ZEPHYR_INCLUDE_DEVICETREE_SPI_H_ */