| /* |
| * Copyright (c) 2022-2023 Marcin Niestroj |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /dts-v1/; |
| #include "xiao_ble_common.dtsi" |
| #include <zephyr/dt-bindings/i2c/i2c.h> |
| #include <zephyr/dt-bindings/gpio/nordic-nrf-gpio.h> |
| |
| / { |
| model = "Seeed XIAO BLE Sense"; |
| compatible = "seeed,xiao-ble", "seeed,xiao-ble-sense"; |
| |
| msm261d3526hicpm-c-en { |
| compatible = "regulator-fixed"; |
| enable-gpios = <&gpio1 10 (NRF_GPIO_DRIVE_S0H1 | GPIO_ACTIVE_HIGH)>; |
| regulator-name = "MSM261D3526HICPM-C-EN"; |
| }; |
| |
| lsm6ds3tr-c-en { |
| compatible = "regulator-fixed-sync", "regulator-fixed"; |
| enable-gpios = <&gpio1 8 (NRF_GPIO_DRIVE_S0H1 | GPIO_ACTIVE_HIGH)>; |
| regulator-name = "LSM6DS3TR_C_EN"; |
| regulator-boot-on; |
| startup-delay-us = <3000>; |
| }; |
| }; |
| |
| &i2c0 { |
| compatible = "nordic,nrf-twim"; |
| /* Cannot be used together with spi0. */ |
| status = "okay"; |
| pinctrl-0 = <&i2c0_default>; |
| pinctrl-1 = <&i2c0_sleep>; |
| pinctrl-names = "default", "sleep"; |
| clock-frequency = <I2C_BITRATE_FAST>; |
| |
| lsm6ds3tr_c: lsm6ds3tr-c@6a { |
| compatible = "st,lsm6dsl"; |
| reg = <0x6a>; |
| irq-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; |
| status = "okay"; |
| }; |
| }; |
| |
| &pdm0 { |
| pinctrl-0 = <&pdm0_default>; |
| pinctrl-1 = <&pdm0_sleep>; |
| pinctrl-names = "default", "sleep"; |
| clock-source = "PCLK32M"; |
| }; |