| #!/usr/bin/env bash |
| # Copyright 2023 Nordic Semiconductor |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| source $(dirname "${BASH_SOURCE[0]}")/../../_mesh_test.sh |
| |
| # Test Proxy advertisement Coex |
| |
| # This test verifies correct Proxy advertisement behavior for a device |
| # where the Proxy adv requirements changes over time, both for single |
| # and multiple subnets. The TX device is the DUT in this instance, while |
| # the RX device scans and verifies that the correct proxy adv messages of |
| # the different subnets is sent within the expected time delta. |
| |
| # Note 1: The maximum allowed timeslot for a subnet to advertise proxy |
| # in this scenario is 10 seconds when there is more than one subnet that |
| # has active proxy adv work. This is reflected in the scanning criteria |
| # on the RX device. |
| |
| # Note 2: The expected message received count for each event is based on |
| # what would be a reasonable/acceptable to receive within a given time |
| # window. The Mesh Protocol specification does not specify exactly the |
| # timing for Proxy ADV messages. |
| |
| # Note 3: The proxy transmitting device mandates emitting of the secure |
| # network beacons. This allows to check that proxy goes back to normal |
| # behavior after the device advertises the secure network beacons. |
| |
| # Test procedure: |
| # 1. (0-20 seconds) A single subnet is active on the TX device with GATT |
| # Proxy enabled. RX device verifies that the single subnet has exclusive |
| # access to the adv medium. |
| # 2. (20-50 seconds) Two additional subnets are added to the TX device. RX |
| # device checks that the subnets are sharing the adv medium, advertising |
| # NET_ID beacons. |
| # 3. (50-110 seconds) The second subnet enables Node Identity. RX device |
| # checks that NODE_ID is advertised by this subnet, and that the two |
| # others continues to advertise NET_ID. |
| # 4. (110-130 seconds) The first and second subnet gets solicited. RX device |
| # checks that PRIVATE_NET_ID is advertised by these subnets. |
| # 5. (130-150 seconds) The second and third subnet are disabled on the TX |
| # device. RX device verifies that the single subnet has exclusive access |
| # to the adv medium again. |
| |
| |
| overlay=overlay_gatt_conf |
| RunTest proxy_adv_multi_subnet_coex \ |
| beacon_tx_proxy_adv_multi_subnet_coex \ |
| beacon_rx_proxy_adv_multi_subnet_coex \ |
| beacon_tx_proxy_adv_solicit_trigger |
| |
| overlay=overlay_gatt_conf_overlay_psa_conf |
| RunTest proxy_adv_multi_subnet_coex \ |
| beacon_tx_proxy_adv_multi_subnet_coex \ |
| beacon_rx_proxy_adv_multi_subnet_coex \ |
| beacon_tx_proxy_adv_solicit_trigger |