blob: 20addc2f1c1dddc9ba6311805fde221357a6ddf2 [file] [log] [blame]
# USB device stack configuration options
# Copyright (c) 2016 Wind River Systems, Inc.
# SPDX-License-Identifier: Apache-2.0
menuconfig USB_DEVICE_STACK
bool "USB Device Support"
select USB_DEVICE_DRIVER
select HWINFO
help
Enable USB device stack.
if USB_DEVICE_STACK
module = USB_DEVICE
module-str = usb device
source "subsys/logging/Kconfig.template.log_config"
config USB_DEVICE_VID
hex "USB Vendor ID"
default 0x2FE3
help
USB device vendor ID. MUST be configured by vendor.
config USB_DEVICE_PID
hex "USB Product ID"
default 0x0100
help
USB device product ID. MUST be configured by vendor.
config USB_DEVICE_MANUFACTURER
string "USB manufacturer name"
default "ZEPHYR"
help
USB device Manufacturer string. MUST be configured by vendor.
config USB_DEVICE_PRODUCT
string "USB product name"
default "USB-DEV"
help
USB device Product string. MUST be configured by vendor.
config USB_DEVICE_SN
string "USB device Serial Number String"
default "0123456789ABCDEF"
help
Placeholder for USB device Serial Number String.
Serial Number String will be derived from
Hardware Information Driver (HWINFO).
config USB_COMPOSITE_DEVICE
bool "Composite device driver"
help
Enable composite USB device driver.
config USB_MAX_NUM_TRANSFERS
int "Set number of USB transfer data buffers"
range 1 32
default 4
help
Allocates buffers used for parallel transfers. Increase this number
according to USB devices count.
config USB_DEVICE_BLUETOOTH_BIG_BUF
bool
# Hidden option to simplify bluetooth buffer requirement
# TODO: Add BUF reserve in H4 mode and ISO?
default y if BT_BUF_ACL_RX_SIZE > 123 # 4 byte header
default y if BT_BUF_ACL_TX_SIZE > 123 # 4 byte header
default y if BT_BUF_EVT_RX_SIZE > 125 # 2 byte header
default y if BT_BUF_CMD_TX_SIZE > 124 # 3 byte header
config USB_REQUEST_BUFFER_SIZE
int "Set buffer size for Standard, Class and Vendor request handlers"
range 64 512 if USB_DEVICE_NETWORK_RNDIS
range 8 65536
default 256 if USB_DEVICE_NETWORK_RNDIS
default 266 if (USB_DEVICE_BLUETOOTH && USB_DEVICE_BLUETOOTH_BIG_BUF)
default 1024 if USB_DEVICE_LOOPBACK
default 128
config USB_MAX_ALT_SETTING
int "Size of the array where alternate settings are stored"
range 0 16
default 8
help
Size of the array where alternate settings are stored.
Should not be smaller than the number of interfaces.
config USB_NUMOF_EP_WRITE_RETRIES
int "Number of endpoint write retries"
default 3
help
Number of endpoint write retries.
config USB_DEVICE_SOF
bool "Start of Frame processing in events"
default y if (USB_DEVICE_AUDIO && NRFX_USBD)
config USB_DEVICE_BOS
bool "USB Binary Device Object Store (BOS)"
config USB_DEVICE_OS_DESC
bool "MS OS Descriptors support"
config USB_SELF_POWERED
bool "Set Self-powered characteristic"
default y
help
Set Self-powered characteristic in bmAttributes to indicate
self powered USB device.
config USB_MAX_POWER
int "Set bMaxPower value"
default 50
range 0 250
help
Set bMaxPower value in the Standard Configuration Descriptor,
the result is 2mA times the value provided.
config USB_WORKQUEUE
bool "Use a dedicate work queue in the USB subsystem"
default y if USB_CDC_ACM
help
This option provides a dedicated work queue that is used for
all offloaded operations initiated by the USB subsystem.
This prevents deadlock situations where tasks on the system
workqueue inadvertently initiate operations that block, such
as UART transmission on CDC-ACM, preventing the system work
queue from making progress on the USB tasks that would
release the task.
Without this the system work queue is used for all USB
offloaded transfers.
config USB_WORKQUEUE_STACK_SIZE
int "USB workqueue stack size"
depends on USB_WORKQUEUE
default 4096 if COVERAGE
default 1024
config USB_WORKQUEUE_PRIORITY
int "USB workqueue priority"
depends on USB_WORKQUEUE
default -2 if COOP_ENABLED && !PREEMPT_ENABLED
default 0 if !COOP_ENABLED
default -1
help
By default, USB work queue priority is the lowest cooperative
priority. This means that any work handler, once started, won't
be preempted by any other thread until finished.
config USB_DEVICE_INITIALIZE_AT_BOOT
bool "Initialize USB device support at boot"
depends on USB_CDC_ACM
help
Use CDC ACM UART as backend for console, shell, or logging.
source "subsys/usb/device/class/Kconfig"
endif # USB_DEVICE_STACK