| /* |
| * Copyright (c) 2018 Justin Watson |
| * Copyright (c) 2020 Gerson Fernando Budke <nandojve@gmail.com> |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define DT_DRV_COMPAT atmel_sam4l_gpio |
| |
| #include <errno.h> |
| #include <zephyr/kernel.h> |
| #include <zephyr/device.h> |
| #include <zephyr/init.h> |
| #include <soc.h> |
| #include <zephyr/drivers/gpio.h> |
| |
| #include "gpio_utils.h" |
| |
| typedef void (*config_func_t)(const struct device *dev); |
| |
| struct gpio_sam_config { |
| /* gpio_driver_config needs to be first */ |
| struct gpio_driver_config common; |
| Gpio *regs; |
| config_func_t config_func; |
| uint32_t periph_id; |
| }; |
| |
| struct gpio_sam_runtime { |
| /* gpio_driver_data needs to be first */ |
| struct gpio_driver_data common; |
| sys_slist_t cb; |
| }; |
| |
| #define GPIO_SAM_ALL_PINS 0xFFFFFFFF |
| |
| static int gpio_sam_port_configure(const struct device *dev, |
| uint32_t mask, |
| gpio_flags_t flags) |
| { |
| const struct gpio_sam_config * const cfg = dev->config; |
| Gpio * const gpio = cfg->regs; |
| |
| /* No hardware support */ |
| if (flags & GPIO_SINGLE_ENDED) { |
| return -ENOTSUP; |
| } |
| |
| if (!(flags & (GPIO_OUTPUT | GPIO_INPUT))) { |
| gpio->IERC = mask; |
| gpio->PUERC = mask; |
| gpio->PDERC = mask; |
| gpio->GPERS = mask; |
| gpio->ODERC = mask; |
| gpio->STERC = mask; |
| |
| return 0; |
| } |
| |
| /* |
| * Always enable schmitt-trigger because SAM4L GPIO Ctrl |
| * is Input only or Input/Output. |
| */ |
| gpio->STERS = mask; |
| |
| if (flags & GPIO_OUTPUT) { |
| if (flags & GPIO_OUTPUT_INIT_HIGH) { |
| gpio->OVRS = mask; |
| } |
| if (flags & GPIO_OUTPUT_INIT_LOW) { |
| gpio->OVRC = mask; |
| } |
| gpio->ODERS = mask; |
| } else { |
| gpio->ODERC = mask; |
| } |
| |
| gpio->PUERC = mask; |
| gpio->PDERC = mask; |
| if (flags & GPIO_PULL_UP) { |
| gpio->PUERS = mask; |
| } else if (flags & GPIO_PULL_DOWN) { |
| gpio->PDERS = mask; |
| } |
| |
| /* Enable the GPIO to control the pin (instead of a peripheral). */ |
| gpio->GPERS = mask; |
| |
| return 0; |
| } |
| |
| static int gpio_sam_config(const struct device *dev, |
| gpio_pin_t pin, |
| gpio_flags_t flags) |
| { |
| return gpio_sam_port_configure(dev, BIT(pin), flags); |
| } |
| |
| static int gpio_sam_port_get_raw(const struct device *dev, |
| uint32_t *value) |
| { |
| const struct gpio_sam_config * const cfg = dev->config; |
| Gpio * const gpio = cfg->regs; |
| |
| *value = gpio->PVR; |
| |
| return 0; |
| } |
| |
| static int gpio_sam_port_set_masked_raw(const struct device *dev, |
| uint32_t mask, |
| uint32_t value) |
| { |
| const struct gpio_sam_config * const cfg = dev->config; |
| Gpio * const gpio = cfg->regs; |
| |
| gpio->OVR = (gpio->PVR & ~mask) | (mask & value); |
| |
| return 0; |
| } |
| |
| static int gpio_sam_port_set_bits_raw(const struct device *dev, |
| uint32_t mask) |
| { |
| const struct gpio_sam_config * const cfg = dev->config; |
| Gpio * const gpio = cfg->regs; |
| |
| gpio->OVRS = mask; |
| |
| return 0; |
| } |
| |
| static int gpio_sam_port_clear_bits_raw(const struct device *dev, |
| uint32_t mask) |
| { |
| const struct gpio_sam_config * const cfg = dev->config; |
| Gpio * const gpio = cfg->regs; |
| |
| gpio->OVRC = mask; |
| |
| return 0; |
| } |
| |
| static int gpio_sam_port_toggle_bits(const struct device *dev, |
| uint32_t mask) |
| { |
| const struct gpio_sam_config * const cfg = dev->config; |
| Gpio * const gpio = cfg->regs; |
| |
| gpio->OVRT = mask; |
| |
| return 0; |
| } |
| |
| static int gpio_sam_port_interrupt_configure(const struct device *dev, |
| uint32_t mask, |
| enum gpio_int_mode mode, |
| enum gpio_int_trig trig) |
| { |
| const struct gpio_sam_config * const cfg = dev->config; |
| Gpio * const gpio = cfg->regs; |
| |
| if (mode == GPIO_INT_MODE_LEVEL) { |
| return -ENOTSUP; |
| } |
| |
| gpio->IERC = mask; |
| gpio->IMR0C = mask; |
| gpio->IMR1C = mask; |
| |
| if (trig != GPIO_INT_TRIG_BOTH) { |
| if (trig == GPIO_INT_TRIG_HIGH) { |
| gpio->IMR0S = mask; |
| } else { |
| gpio->IMR1S = mask; |
| } |
| } |
| |
| if (mode != GPIO_INT_MODE_DISABLED) { |
| gpio->IFRC = mask; |
| gpio->IERS = mask; |
| } |
| |
| return 0; |
| } |
| |
| static int gpio_sam_pin_interrupt_configure(const struct device *dev, |
| gpio_pin_t pin, |
| enum gpio_int_mode mode, |
| enum gpio_int_trig trig) |
| { |
| return gpio_sam_port_interrupt_configure(dev, BIT(pin), mode, trig); |
| } |
| |
| static void gpio_sam_isr(const struct device *dev) |
| { |
| const struct gpio_sam_config * const cfg = dev->config; |
| Gpio * const gpio = cfg->regs; |
| struct gpio_sam_runtime *context = dev->data; |
| uint32_t int_stat; |
| |
| int_stat = gpio->IFR; |
| gpio->IFRC = int_stat; |
| |
| gpio_fire_callbacks(&context->cb, dev, int_stat); |
| } |
| |
| static int gpio_sam_manage_callback(const struct device *port, |
| struct gpio_callback *callback, |
| bool set) |
| { |
| struct gpio_sam_runtime *context = port->data; |
| |
| return gpio_manage_callback(&context->cb, callback, set); |
| } |
| |
| static const struct gpio_driver_api gpio_sam_api = { |
| .pin_configure = gpio_sam_config, |
| .port_get_raw = gpio_sam_port_get_raw, |
| .port_set_masked_raw = gpio_sam_port_set_masked_raw, |
| .port_set_bits_raw = gpio_sam_port_set_bits_raw, |
| .port_clear_bits_raw = gpio_sam_port_clear_bits_raw, |
| .port_toggle_bits = gpio_sam_port_toggle_bits, |
| .pin_interrupt_configure = gpio_sam_pin_interrupt_configure, |
| .manage_callback = gpio_sam_manage_callback, |
| }; |
| |
| int gpio_sam_init(const struct device *dev) |
| { |
| const struct gpio_sam_config * const cfg = dev->config; |
| |
| soc_pmc_peripheral_enable(cfg->periph_id); |
| |
| cfg->config_func(dev); |
| |
| return 0; |
| } |
| |
| #define GPIO_SAM_IRQ_CONNECT(n, m) \ |
| do { \ |
| IRQ_CONNECT(DT_INST_IRQ_BY_IDX(n, m, irq), \ |
| DT_INST_IRQ_BY_IDX(n, m, priority), \ |
| gpio_sam_isr, \ |
| DEVICE_DT_INST_GET(n), 0); \ |
| irq_enable(DT_INST_IRQ_BY_IDX(n, m, irq)); \ |
| } while (0) |
| |
| #define GPIO_SAM_INIT(n) \ |
| static void port_##n##_sam_config_func(const struct device *dev);\ |
| \ |
| static const struct gpio_sam_config port_##n##_sam_config = { \ |
| .common = { \ |
| .port_pin_mask = GPIO_PORT_PIN_MASK_FROM_DT_INST(n),\ |
| }, \ |
| .regs = (Gpio *)DT_INST_REG_ADDR(n), \ |
| .periph_id = DT_INST_PROP(n, peripheral_id), \ |
| .config_func = port_##n##_sam_config_func, \ |
| }; \ |
| \ |
| static struct gpio_sam_runtime port_##n##_sam_runtime; \ |
| \ |
| DEVICE_DT_INST_DEFINE(n, gpio_sam_init, NULL, \ |
| &port_##n##_sam_runtime, \ |
| &port_##n##_sam_config, PRE_KERNEL_1, \ |
| CONFIG_GPIO_INIT_PRIORITY, \ |
| &gpio_sam_api); \ |
| \ |
| static void port_##n##_sam_config_func(const struct device *dev)\ |
| { \ |
| GPIO_SAM_IRQ_CONNECT(n, 0); \ |
| GPIO_SAM_IRQ_CONNECT(n, 1); \ |
| GPIO_SAM_IRQ_CONNECT(n, 2); \ |
| GPIO_SAM_IRQ_CONNECT(n, 3); \ |
| } |
| |
| DT_INST_FOREACH_STATUS_OKAY(GPIO_SAM_INIT) |