blob: a907b074688b464d4389d9fb44306bd60906c6da [file] [log] [blame]
# Thingy53 NRF5340 board configuration
# Copyright (c) 2021 Nordic Semiconductor ASA
# SPDX-License-Identifier: Apache-2.0
config THINGY53_INIT_PRIORITY
int "Init priority"
default 79
help
Initialization priority of the Thingy:53.
config MBOX_NRFX_IPC
default MBOX
if BOARD_THINGY53_NRF5340_CPUAPP || BOARD_THINGY53_NRF5340_CPUAPP_NS
config BOARD_ENABLE_DCDC_APP
bool "Application MCU DCDC converter"
select SOC_DCDC_NRF53X_APP
default y
config BOARD_ENABLE_DCDC_NET
bool "Network MCU DCDC converter"
select SOC_DCDC_NRF53X_NET
default y
config BOARD_ENABLE_DCDC_HV
bool "High Voltage DCDC converter"
select SOC_DCDC_NRF53X_HV
default y
config BOARD_SERIAL_BACKEND_CDC_ACM
bool "USB CDC"
default y
config BOARD_ENABLE_CPUNET
bool "NRF53 Network MCU"
select SOC_NRF_GPIO_FORWARDER_FOR_NRF5340 if \
$(dt_compat_enabled,$(DT_COMPAT_NORDIC_NRF_GPIO_FORWARDER))
help
This option enables releasing the Network 'force off' signal, which
as a consequence will power up the Network MCU during system boot.
Additionally, the option allocates GPIO pins that will be used by UARTE
of the Network MCU.
Note: GPIO pin allocation can only be configured by the secure Application
MCU firmware, so when this option is used with the non-secure version of
the board, the application needs to take into consideration, that the
secure firmware image must already have configured GPIO allocation for the
Network MCU.
default y if (BT || NRF_802154_SER_HOST)
config DOMAIN_CPUNET_BOARD
string
default "thingy53_nrf5340_cpunet"
depends on BOARD_ENABLE_CPUNET
help
The board which will be used for CPUNET domain when creating a multi
image application where one or more images should be located on
another board. For example hci_rpmsg on the nRF5340_cpunet for
Bluetooth applications.
endif # BOARD_THINGY53_NRF5340_CPUAPP || BOARD_THINGY53_NRF5340_CPUAPP_NS
if BOARD_THINGY53_NRF5340_CPUNET
config DOMAIN_CPUAPP_BOARD
string
default "thingy53_nrf5340_cpuapp"
help
The board which will be used for CPUAPP domain when creating a multi
image application where one or more images should be located on
another board.
endif # BOARD_THINGY53_NRF5340_CPUNET