| /* |
| * Copyright (c) 2016 Wind River Systems, Inc. |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /** |
| * @brief Mailboxes. |
| */ |
| |
| #include <kernel.h> |
| #include <kernel_structs.h> |
| |
| #include <toolchain.h> |
| #include <linker/sections.h> |
| #include <string.h> |
| #include <ksched.h> |
| #include <wait_q.h> |
| #include <sys/dlist.h> |
| #include <init.h> |
| |
| #if (CONFIG_NUM_MBOX_ASYNC_MSGS > 0) |
| |
| /* asynchronous message descriptor type */ |
| struct k_mbox_async { |
| struct _thread_base thread; /* dummy thread object */ |
| struct k_mbox_msg tx_msg; /* transmit message descriptor */ |
| }; |
| |
| /* stack of unused asynchronous message descriptors */ |
| K_STACK_DEFINE(async_msg_free, CONFIG_NUM_MBOX_ASYNC_MSGS); |
| |
| /* allocate an asynchronous message descriptor */ |
| static inline void mbox_async_alloc(struct k_mbox_async **async) |
| { |
| (void)k_stack_pop(&async_msg_free, (stack_data_t *)async, K_FOREVER); |
| } |
| |
| /* free an asynchronous message descriptor */ |
| static inline void mbox_async_free(struct k_mbox_async *async) |
| { |
| k_stack_push(&async_msg_free, (stack_data_t)async); |
| } |
| |
| #endif /* CONFIG_NUM_MBOX_ASYNC_MSGS > 0 */ |
| |
| #if (CONFIG_NUM_MBOX_ASYNC_MSGS > 0) |
| |
| /* |
| * Do run-time initialization of mailbox object subsystem. |
| */ |
| static int init_mbox_module(const struct device *dev) |
| { |
| ARG_UNUSED(dev); |
| |
| /* array of asynchronous message descriptors */ |
| static struct k_mbox_async __noinit async_msg[CONFIG_NUM_MBOX_ASYNC_MSGS]; |
| |
| #if (CONFIG_NUM_MBOX_ASYNC_MSGS > 0) |
| /* |
| * Create pool of asynchronous message descriptors. |
| * |
| * A dummy thread requires minimal initialization, since it never gets |
| * to execute. The _THREAD_DUMMY flag is sufficient to distinguish a |
| * dummy thread from a real one. The threads are *not* added to the |
| * kernel's list of known threads. |
| * |
| * Once initialized, the address of each descriptor is added to a stack |
| * that governs access to them. |
| */ |
| |
| int i; |
| |
| for (i = 0; i < CONFIG_NUM_MBOX_ASYNC_MSGS; i++) { |
| z_init_thread_base(&async_msg[i].thread, 0, _THREAD_DUMMY, 0); |
| k_stack_push(&async_msg_free, (stack_data_t)&async_msg[i]); |
| } |
| #endif /* CONFIG_NUM_MBOX_ASYNC_MSGS > 0 */ |
| |
| /* Complete initialization of statically defined mailboxes. */ |
| |
| return 0; |
| } |
| |
| SYS_INIT(init_mbox_module, PRE_KERNEL_1, CONFIG_KERNEL_INIT_PRIORITY_OBJECTS); |
| |
| #endif /* CONFIG_NUM_MBOX_ASYNC_MSGS */ |
| |
| void k_mbox_init(struct k_mbox *mbox) |
| { |
| z_waitq_init(&mbox->tx_msg_queue); |
| z_waitq_init(&mbox->rx_msg_queue); |
| mbox->lock = (struct k_spinlock) {}; |
| |
| SYS_PORT_TRACING_OBJ_INIT(k_mbox, mbox); |
| } |
| |
| /** |
| * @brief Check compatibility of sender's and receiver's message descriptors. |
| * |
| * Compares sender's and receiver's message descriptors to see if they are |
| * compatible. If so, the descriptor fields are updated to reflect that a |
| * match has occurred. |
| * |
| * @param tx_msg Pointer to transmit message descriptor. |
| * @param rx_msg Pointer to receive message descriptor. |
| * |
| * @return 0 if successfully matched, otherwise -1. |
| */ |
| static int mbox_message_match(struct k_mbox_msg *tx_msg, |
| struct k_mbox_msg *rx_msg) |
| { |
| uint32_t temp_info; |
| |
| if (((tx_msg->tx_target_thread == (k_tid_t)K_ANY) || |
| (tx_msg->tx_target_thread == rx_msg->tx_target_thread)) && |
| ((rx_msg->rx_source_thread == (k_tid_t)K_ANY) || |
| (rx_msg->rx_source_thread == tx_msg->rx_source_thread))) { |
| |
| /* update thread identifier fields for both descriptors */ |
| rx_msg->rx_source_thread = tx_msg->rx_source_thread; |
| tx_msg->tx_target_thread = rx_msg->tx_target_thread; |
| |
| /* update application info fields for both descriptors */ |
| temp_info = rx_msg->info; |
| rx_msg->info = tx_msg->info; |
| tx_msg->info = temp_info; |
| |
| /* update data size field for receiver only */ |
| if (rx_msg->size > tx_msg->size) { |
| rx_msg->size = tx_msg->size; |
| } |
| |
| /* update data location fields for receiver only */ |
| rx_msg->tx_data = tx_msg->tx_data; |
| rx_msg->tx_block = tx_msg->tx_block; |
| if (rx_msg->tx_data != NULL) { |
| rx_msg->tx_block.data = NULL; |
| } else if (rx_msg->tx_block.data != NULL) { |
| rx_msg->tx_data = rx_msg->tx_block.data; |
| } else { |
| /* no data */ |
| } |
| |
| /* update syncing thread field for receiver only */ |
| rx_msg->_syncing_thread = tx_msg->_syncing_thread; |
| |
| return 0; |
| } |
| |
| return -1; |
| } |
| |
| /** |
| * @brief Dispose of received message. |
| * |
| * Releases any memory pool block still associated with the message, |
| * then notifies the sender that message processing is complete. |
| * |
| * @param rx_msg Pointer to receive message descriptor. |
| * |
| * @return N/A |
| */ |
| static void mbox_message_dispose(struct k_mbox_msg *rx_msg) |
| { |
| struct k_thread *sending_thread; |
| struct k_mbox_msg *tx_msg; |
| |
| /* do nothing if message was disposed of when it was received */ |
| if (rx_msg->_syncing_thread == NULL) { |
| return; |
| } |
| |
| if (rx_msg->tx_block.data != NULL) { |
| rx_msg->tx_block.data = NULL; |
| } |
| |
| /* recover sender info */ |
| sending_thread = rx_msg->_syncing_thread; |
| rx_msg->_syncing_thread = NULL; |
| tx_msg = (struct k_mbox_msg *)sending_thread->base.swap_data; |
| |
| /* update data size field for sender */ |
| tx_msg->size = rx_msg->size; |
| |
| #if (CONFIG_NUM_MBOX_ASYNC_MSGS > 0) |
| /* |
| * asynchronous send: free asynchronous message descriptor + |
| * dummy thread pair, then give semaphore (if needed) |
| */ |
| if ((sending_thread->base.thread_state & _THREAD_DUMMY) != 0U) { |
| struct k_sem *async_sem = tx_msg->_async_sem; |
| |
| mbox_async_free((struct k_mbox_async *)sending_thread); |
| if (async_sem != NULL) { |
| k_sem_give(async_sem); |
| } |
| return; |
| } |
| #endif |
| |
| /* synchronous send: wake up sending thread */ |
| arch_thread_return_value_set(sending_thread, 0); |
| z_mark_thread_as_not_pending(sending_thread); |
| z_ready_thread(sending_thread); |
| z_reschedule_unlocked(); |
| } |
| |
| /** |
| * @brief Send a mailbox message. |
| * |
| * Helper routine that handles both synchronous and asynchronous sends. |
| * |
| * @param mbox Pointer to the mailbox object. |
| * @param tx_msg Pointer to transmit message descriptor. |
| * @param timeout Maximum time (milliseconds) to wait for the message to be |
| * received (although not necessarily completely processed). |
| * Use K_NO_WAIT to return immediately, or K_FOREVER to wait as long |
| * as necessary. |
| * |
| * @return 0 if successful, -ENOMSG if failed immediately, -EAGAIN if timed out |
| */ |
| static int mbox_message_put(struct k_mbox *mbox, struct k_mbox_msg *tx_msg, |
| k_timeout_t timeout) |
| { |
| struct k_thread *sending_thread; |
| struct k_thread *receiving_thread; |
| struct k_mbox_msg *rx_msg; |
| k_spinlock_key_t key; |
| |
| /* save sender id so it can be used during message matching */ |
| tx_msg->rx_source_thread = _current; |
| |
| /* finish readying sending thread (actual or dummy) for send */ |
| sending_thread = tx_msg->_syncing_thread; |
| sending_thread->base.swap_data = tx_msg; |
| |
| /* search mailbox's rx queue for a compatible receiver */ |
| key = k_spin_lock(&mbox->lock); |
| |
| SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_mbox, message_put, mbox, timeout); |
| |
| _WAIT_Q_FOR_EACH(&mbox->rx_msg_queue, receiving_thread) { |
| rx_msg = (struct k_mbox_msg *)receiving_thread->base.swap_data; |
| |
| if (mbox_message_match(tx_msg, rx_msg) == 0) { |
| /* take receiver out of rx queue */ |
| z_unpend_thread(receiving_thread); |
| |
| /* ready receiver for execution */ |
| arch_thread_return_value_set(receiving_thread, 0); |
| z_ready_thread(receiving_thread); |
| |
| #if (CONFIG_NUM_MBOX_ASYNC_MSGS > 0) |
| /* |
| * asynchronous send: swap out current thread |
| * if receiver has priority, otherwise let it continue |
| * |
| * note: dummy sending thread sits (unqueued) |
| * until the receiver consumes the message |
| */ |
| if ((sending_thread->base.thread_state & _THREAD_DUMMY) |
| != 0U) { |
| z_reschedule(&mbox->lock, key); |
| return 0; |
| } |
| #endif |
| SYS_PORT_TRACING_OBJ_FUNC_BLOCKING(k_mbox, message_put, mbox, timeout); |
| |
| /* |
| * synchronous send: pend current thread (unqueued) |
| * until the receiver consumes the message |
| */ |
| int ret = z_pend_curr(&mbox->lock, key, NULL, K_FOREVER); |
| |
| SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_mbox, message_put, mbox, timeout, ret); |
| |
| return ret; |
| } |
| } |
| |
| /* didn't find a matching receiver: don't wait for one */ |
| if (K_TIMEOUT_EQ(timeout, K_NO_WAIT)) { |
| SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_mbox, message_put, mbox, timeout, -ENOMSG); |
| |
| k_spin_unlock(&mbox->lock, key); |
| return -ENOMSG; |
| } |
| |
| #if (CONFIG_NUM_MBOX_ASYNC_MSGS > 0) |
| /* asynchronous send: dummy thread waits on tx queue for receiver */ |
| if ((sending_thread->base.thread_state & _THREAD_DUMMY) != 0U) { |
| z_pend_thread(sending_thread, &mbox->tx_msg_queue, K_FOREVER); |
| k_spin_unlock(&mbox->lock, key); |
| return 0; |
| } |
| #endif |
| SYS_PORT_TRACING_OBJ_FUNC_BLOCKING(k_mbox, message_put, mbox, timeout); |
| |
| /* synchronous send: sender waits on tx queue for receiver or timeout */ |
| int ret = z_pend_curr(&mbox->lock, key, &mbox->tx_msg_queue, timeout); |
| |
| SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_mbox, message_put, mbox, timeout, ret); |
| |
| return ret; |
| } |
| |
| int k_mbox_put(struct k_mbox *mbox, struct k_mbox_msg *tx_msg, |
| k_timeout_t timeout) |
| { |
| /* configure things for a synchronous send, then send the message */ |
| tx_msg->_syncing_thread = _current; |
| |
| SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_mbox, put, mbox, timeout); |
| |
| int ret = mbox_message_put(mbox, tx_msg, timeout); |
| |
| SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_mbox, put, mbox, timeout, ret); |
| |
| return ret; |
| } |
| |
| #if (CONFIG_NUM_MBOX_ASYNC_MSGS > 0) |
| void k_mbox_async_put(struct k_mbox *mbox, struct k_mbox_msg *tx_msg, |
| struct k_sem *sem) |
| { |
| struct k_mbox_async *async; |
| |
| SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_mbox, async_put, mbox, sem); |
| |
| /* |
| * allocate an asynchronous message descriptor, configure both parts, |
| * then send the message asynchronously |
| */ |
| mbox_async_alloc(&async); |
| |
| async->thread.prio = _current->base.prio; |
| |
| async->tx_msg = *tx_msg; |
| async->tx_msg._syncing_thread = (struct k_thread *)&async->thread; |
| async->tx_msg._async_sem = sem; |
| |
| (void)mbox_message_put(mbox, &async->tx_msg, K_FOREVER); |
| SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_mbox, async_put, mbox, sem); |
| } |
| #endif |
| |
| void k_mbox_data_get(struct k_mbox_msg *rx_msg, void *buffer) |
| { |
| /* handle case where data is to be discarded */ |
| if (buffer == NULL) { |
| rx_msg->size = 0; |
| mbox_message_dispose(rx_msg); |
| return; |
| } |
| |
| /* copy message data to buffer, then dispose of message */ |
| if ((rx_msg->tx_data != NULL) && (rx_msg->size > 0U)) { |
| (void)memcpy(buffer, rx_msg->tx_data, rx_msg->size); |
| } |
| mbox_message_dispose(rx_msg); |
| } |
| |
| /** |
| * @brief Handle immediate consumption of received mailbox message data. |
| * |
| * Checks to see if received message data should be kept for later retrieval, |
| * or if the data should consumed immediately and the message disposed of. |
| * |
| * The data is consumed immediately in either of the following cases: |
| * 1) The receiver requested immediate retrieval by suppling a buffer |
| * to receive the data. |
| * 2) There is no data to be retrieved. (i.e. Data size is 0 bytes.) |
| * |
| * @param rx_msg Pointer to receive message descriptor. |
| * @param buffer Pointer to buffer to receive data. |
| * |
| * @return 0 |
| */ |
| static int mbox_message_data_check(struct k_mbox_msg *rx_msg, void *buffer) |
| { |
| if (buffer != NULL) { |
| /* retrieve data now, then dispose of message */ |
| k_mbox_data_get(rx_msg, buffer); |
| } else if (rx_msg->size == 0U) { |
| /* there is no data to get, so just dispose of message */ |
| mbox_message_dispose(rx_msg); |
| } else { |
| /* keep message around for later data retrieval */ |
| } |
| |
| return 0; |
| } |
| |
| int k_mbox_get(struct k_mbox *mbox, struct k_mbox_msg *rx_msg, void *buffer, |
| k_timeout_t timeout) |
| { |
| struct k_thread *sending_thread; |
| struct k_mbox_msg *tx_msg; |
| k_spinlock_key_t key; |
| int result; |
| |
| /* save receiver id so it can be used during message matching */ |
| rx_msg->tx_target_thread = _current; |
| |
| /* search mailbox's tx queue for a compatible sender */ |
| key = k_spin_lock(&mbox->lock); |
| |
| SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_mbox, get, mbox, timeout); |
| |
| _WAIT_Q_FOR_EACH(&mbox->tx_msg_queue, sending_thread) { |
| tx_msg = (struct k_mbox_msg *)sending_thread->base.swap_data; |
| |
| if (mbox_message_match(tx_msg, rx_msg) == 0) { |
| /* take sender out of mailbox's tx queue */ |
| z_unpend_thread(sending_thread); |
| |
| k_spin_unlock(&mbox->lock, key); |
| |
| /* consume message data immediately, if needed */ |
| result = mbox_message_data_check(rx_msg, buffer); |
| |
| SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_mbox, get, mbox, timeout, result); |
| return result; |
| } |
| } |
| |
| /* didn't find a matching sender */ |
| |
| if (K_TIMEOUT_EQ(timeout, K_NO_WAIT)) { |
| SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_mbox, get, mbox, timeout, -ENOMSG); |
| |
| /* don't wait for a matching sender to appear */ |
| k_spin_unlock(&mbox->lock, key); |
| return -ENOMSG; |
| } |
| |
| SYS_PORT_TRACING_OBJ_FUNC_BLOCKING(k_mbox, get, mbox, timeout); |
| |
| /* wait until a matching sender appears or a timeout occurs */ |
| _current->base.swap_data = rx_msg; |
| result = z_pend_curr(&mbox->lock, key, &mbox->rx_msg_queue, timeout); |
| |
| /* consume message data immediately, if needed */ |
| if (result == 0) { |
| result = mbox_message_data_check(rx_msg, buffer); |
| } |
| |
| SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_mbox, get, mbox, timeout, result); |
| |
| return result; |
| } |